1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your system components.
Figure 1: GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case, showcasing its panoramic design and illuminated ARGB fans.
2. Informazzjoni dwar is-Sigurtà
Osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita ħsara lill-prodott jew korriment lilek innifsek:
- Always disconnect the power supply from the wall outlet before performing any installation or maintenance.
- Handle internal components with care to avoid electrostatic discharge (ESD) damage. Consider using an anti-static wrist strap.
- Keep the case away from water, moisture, and extreme temperatures.
- Żgura ventilazzjoni xierqa biex tevita sħana żejda.
- Do not attempt to open or repair the power supply unit (PSU) if it is integrated; refer to qualified service personnel.
- Keep small parts and screws out of reach of children.
3. Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case
- Kaxxa tal-Aċċessorji (li fiha viti, rabtiet tal-kejbil, u partijiet żgħar oħra)
- Manwal għall-Utent (dan id-dokument)
- Pre-installed ARGB Fans (2 x 120mm side, 1 x 120mm rear)
4. Identifikazzjoni tal-Komponent
Familiarize yourself with the various parts of the GAMDIAS Aura GC10m V2 case:
Figura 2: Quddiem view of the case, highlighting the tempered glass panel.
Figura 3: Wara view of the case, indicating motherboard I/O cutout, expansion slots, and rear fan mount.
Figure 4: Top I/O Panel featuring USB Type-C, USB 2.0, HD Audio, and LED switch button.
Komponenti Ewlenin:
- Pannelli tal-Ħġieġ Ittemprat: Front and side panels for component visibility.
- Portijiet I/O: Located on the top panel, includes 1x USB Type-C, 1x USB 2.0, HD Audio, and an LED switch button.
- Fan Mounts: Multiple locations for cooling fans and radiators (Top, Side, Bottom, Rear).
- Drive Bays: Dedicated spaces for 3.5" HDDs and 2.5" SSDs.
- Slots ta' Espansjoni: For graphics cards and other PCIe devices.
5. Gwida ta' Setup
Follow these steps for proper installation of your PC components:
5.1. Tħejjija tal-Każ
- Poġġi l-kaxxa fuq wiċċ ċatt u stabbli.
- Carefully remove the tempered glass side panel by unlatching the simple clasp mechanism.
Figure 5: Removing the tempered glass side panel using the clasp mechanism.
5.2. Installazzjoni tal-Motherboard
- Installa l-I/O shield (jekk mhux imwaħħal minn qabel mal-motherboard tiegħek) fil-ftuħ ta' wara tal-kaxxa.
- Align your Micro-ATX or Mini-ITX motherboard with the standoffs inside the case.
- Waħħal il-motherboard billi tuża l-viti xierqa mill-kaxxa tal-aċċessorji.
5.3. Installazzjoni tal-Unità tal-Provvista tal-Enerġija (PSU)
- Locate the PSU mounting area, typically at the rear bottom of the case.
- Slide the PSU into position and secure it with screws from the rear of the case.
5.4. Installazzjoni tad-Drajv tal-Ħażna
- For 3.5" HDDs: Install into the designated HDD cage.
- For 2.5" SSDs: Mount onto the dedicated 2.5" drive bays.
- Secure drives with screws.
5.5. Graphics Card (VGA) and Expansion Card Installation
- Neħħi l-għata tas-slott ta' espansjoni meħtieġa minn wara tal-kaxxa.
- Daħħal il-karta grafika tiegħek jew karti ta' espansjoni oħra fis-slots PCIe fuq il-motherboard tiegħek.
- Waħħal il-karti bil-viti.
5.6. Installazzjoni tal-Fann u r-Radjatur
Il-kaxxa tappoġġja diversi konfigurazzjonijiet ta' fann u radjatur:
- Fuq: Up to 3 x 120mm or 2 x 140mm fans; Radiator up to 360mm or 280mm.
- In-naħa: Up to 2 x 120mm or 2 x 140mm fans; Radiator up to 240mm.
- Qiegħed: Sa 3 fannijiet ta' 120mm jew 2 fannijiet ta' 140mm.
- Wara: 1 x 120mm or 1 x 140mm fan; Radiator up to 120mm.
Figure 6: Cooling support diagram for fan and radiator placement.
5.7. Ġestjoni tal-Kejbil
Uża l-qtugħ tar-rotta tal-kejbils u l-punti ta' rbit wara t-trej tal-motherboard biex torganizza l-kejbils. Dan itejjeb il-fluss tal-arja u l-estetika.
6. Operazzjoni
6.1. Tixgħel
After all components are installed and cables are connected, close the side panel. Connect the power cable to the PSU and a wall outlet, then press the power button on the top I/O panel to start your system.
6.2. Kontroll tad-Dawl ARGB
The pre-installed ARGB fans can be controlled via the dedicated LED switch button on the top I/O panel. Press the button to cycle through various lighting modes and colors. For advanced synchronization with other ARGB components, connect the case's ARGB header to a compatible motherboard's 5V 3-pin ARGB header and use the motherboard's software.
7. Manutenzjoni
7.1. Tindif
- Regularly clean dust filters to maintain optimal airflow.
- Use a soft, dry cloth to wipe down exterior surfaces.
- For interior cleaning, use compressed air to remove dust from components and fan blades. Ensure the system is powered off and unplugged.
7.2. Manutenzjoni tal-fann
Periodically check fan blades for dust buildup. Clean them gently with a soft brush or compressed air. Ensure fans are securely mounted and free from obstructions.
8 Issolvi l-problemi
Din it-taqsima tindirizza kwistjonijiet komuni li tista' tiltaqa' magħhom:
| Ħruġ | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Is-sistema ma tixgħel | Kejbils tal-enerġija maħlula, PSU difettuż, konnessjonijiet mhux korretti tal-pannell ta' quddiem. | Check all power connections (PSU to wall, PSU to motherboard/components). Verify front panel header connections to the motherboard. Test PSU if possible. |
| ARGB fans not lighting up | ARGB cables disconnected, incorrect ARGB header connection, faulty fan/controller. | Ensure ARGB cables are securely connected to the controller or motherboard's 5V 3-pin ARGB header. Use the LED switch button. Check motherboard software. |
| Poor airflow/high temperatures | Akkumulazzjoni ta' trab, orjentazzjoni mhux korretta tal-fann, fannijiet insuffiċjenti. | Clean dust filters and fans. Ensure fans are oriented correctly (intake/exhaust). Consider adding more fans if needed. |
| Side panel difficult to close | Cables obstructing, components not fully seated. | Re-route cables for better management. Ensure all components are fully seated and not protruding. |
9. Speċifikazzjonijiet Tekniċi
Detailed specifications for the GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case:
Figura 7: Aktarview of key technical specifications.
| Karatteristika | Speċifikazzjoni |
|---|---|
| Tip ta' Każ | Micro-Tower |
| Appoġġ tal-Motherboard | Mikro-ATX, Mini-ITX |
| Dimensjonijiet (LxWxH) | 42 x 29 x 36.5 ċm |
| Piż tal-oġġett | 5 kg |
| Portijiet I/O | 1x USB Type-C, 1x USB 2.0, HD Audio, 1x LED Switch Button |
| Drive Bays | 1 x 3.5" or 1 x 2.5" (HDD Cage), 3 x 2.5" |
| Fannijiet installati minn qabel | 2 x 120mm ARGB (Side), 1 x 120mm ARGB (Rear) |
| Appoġġ tal-Fann (Massimu) | Top: 3x120mm/2x140mm, Side: 2x120mm/2x140mm, Bottom: 3x120mm/2x140mm, Rear: 1x120mm/1x140mm |
| Appoġġ tar-Radjatur (Massimu) | Top: 360mm/280mm, Side: 240mm, Rear: 120mm |
| Limitu tal-Għoli tal-CPU Cooler | 165mm |
| VGA Length Limit | 400mm |
| PSU Length Limit | 160mm |
| Sinkronizzazzjoni RGB | 5V 3-Pin Header Indirizzabbli |
10. Garanzija u Appoġġ
Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għall-GAMDIAS uffiċjali webis-sit jew ikkuntattja lill-bejjiegħ lokali tiegħek. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Manifattur: GAMDIAS TAIWAN, No. 113, Jian 2nd Rd., Zhonghe, Dist., New Taipei City 235, Taiwan
Importatur (l-Indja): Allway Distributions Pvt Ltd, No-49, H.B. Samajha Road, Baswangudi, Bengaluru- 560004, Contact -8904307700
