ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Introduzzjoni

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Stampa 1.1: Quddiem view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Informazzjoni dwar is-Sigurtà

Biex tnaqqas ir-riskju ta’ nar, xokk elettriku, jew korriment personali, dejjem segwi dawn il-prekawzjonijiet bażiċi ta’ sigurtà:

• TWISSIJA: Riskju ta' Xokk Elettriku. Skonnettja l-enerġija fil-fjus jew circuit breaker qabel l-installazzjoni jew is-servizz.
• Dan il-prodott għandu jiġi installat skont il-kodiċi tal-installazzjoni applikabbli minn persuna familjari mal-kostruzzjoni u t-tħaddim tal-prodott u l-perikli involuti.
• Use only 120V AC, 60Hz circuits.
• Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
• Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati kif suppost.
• Dan l-apparat huwa adattat għall-użu fuq ġewwa biss.

3. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Ħardwer tal-Immuntar (viti, ġewż tal-wajer)
• E26 Adapter Accessories (for recessed can installation)
• Manwal ta 'Istruzzjoni (dan id-dokument)

Image 3.1: Included accessories for installation.

4. Karatteristiċi tal-prodott

• 3CCT Selectable: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Sensor tal-Moviment: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Dewmien aġġustabbli: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Sensor tad-Dawl: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Effiċjenti fl-Enerġija: 16W LED provides 1000 lumens of brightness.
• Installazzjoni versatili: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Setup u Installazzjoni

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Installazzjoni tal-Kaxxa tal-Ġunzjoni

1. Neħħi l-lenti billi ddawwarha lejn l-arloġġ.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Installazzjoni ta' Bottijiet Imdaħħla 'l ġewwa

1. Neħħi l-lenti billi ddawwarha lejn l-arloġġ.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Istruzzjonijiet Operattivi

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Funzjonalità tas-Sensor tal-Mozzjoni

• Bi nhar: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Kun żgur li l-enerġija hija mitfija.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Kun żgur li l-enerġija hija mitfija.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Manutenzjoni

The ECOELER LED ceiling light requires minimal maintenance.

• Tindif: Kun żgur li l-elettriku jkun mitfi qabel ma tnaddaf. Imsaħ l-apparat b'ċarruta ratba, niexfa, jew kemxejn imxarrba.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Lenti: Keep the lens clean to ensure optimal light output and motion sensor performance.

8 Issolvi l-problemi

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER websit.

Manifattur: ECOELER ELECTRIC INC