Manwal tal-Utent tar-Rota Elettrika tal-Belt PEXMOR ta' 14" li Tintewa

1. Informazzjoni Importanti dwar is-Sigurtà

Read this manual thoroughly before operating the PEXMOR Electric Bicycle. Failure to follow instructions and safety guidelines may result in serious injury or damage to the product. Retain this manual for future reference.

Prekawzjonijiet Ġenerali tas-Sigurtà

• Dejjem ilbes elmu u tagħmir tas-sigurtà xieraq meta tkun qed issuq.
• Kun żgur li l-komponenti kollha huma mwaħħlin sew u f'kundizzjoni tajba ta' ħidma qabel kull rikba.
• Comply with all local traffic laws and regulations.
• Tirkbux taħt l-influwenza ta 'alkoħol jew drogi.
• Evita li ssuq f'kundizzjonijiet tat-temp ħżiena, bħal xita qawwija jew borra.
• The electric bicycle is designed for adults and teens. Ensure the rider meets the recommended height and weight limits.
• This product complies with UL2849 standards for electrical systems for e-bikes.

Sigurtà tal-batterija

• Use only the charger provided with the bicycle.
• Tesponix il-batterija għal temperaturi estremi jew dawl tax-xemx dirett.
• Do not puncture, drop, or disassemble the battery.
• Iċċarġja l-batterija f'żona ventilata sew, 'il bogħod minn materjali fjammabbli.

2. Setup u Assemblea

The PEXMOR Electric Bicycle comes partially assembled. Follow these steps to complete the setup.

Tiftaħ ir-Rota

1. Carefully remove the bicycle from its packaging.
2. Locate the main frame hinge and release the safety latch.
3. Unfold the frame until it locks into place. Secure the safety latch.
4. Għolli z-zokk tal-manubriju u waħħal il-mekkaniżmu tal-illokkjar tiegħu.
5. Unfold the pedals if they are in a folded position.

Figure 2.1: The PEXMOR Electric Bicycle shown in both its folded and unfolded configurations, illustrating its compact design for storage and transport.

L-aġġustament tas-Sedil

• Loosen the quick-release lever on the seat post.
• Adjust the seat height to a comfortable position where your feet can touch the ground while seated.
• Securely tighten the quick-release lever.

Figure 2.2: This diagram illustrates the adjustable seat height range (27.5-33.5 inches / 70-85 cm) and overall dimensions of the PEXMOR Electric Bicycle, along with recommended rider height.

Figura 2.3: Dettaljata view of the adjustable ergonomic seat, highlighting its design for rider comfort and customization.

Ċarġ tal-Batterija Inizjali

Before your first ride, fully charge the battery. Connect the charger to the charging port on the bicycle and then to a power outlet. The indicator light on the charger will change when charging is complete.

3. Istruzzjonijiet Operattivi

Familiarize yourself with the controls and riding modes of your PEXMOR Electric Bicycle.

Powering On/Off and LED Display

• To power on the bicycle, press and hold the power button on the handlebar-mounted LED display.
• The LED display shows battery level, current speed, and ride metrics.
• Biex titfi, agħfas u żomm il-buttuna tal-qawwa mill-ġdid.

Figura 3.1: Dettaljata view of the smart handle control, featuring the LED display that provides real-time information such as battery level and speed.

Modi ta' Riding

The bicycle offers three distinct riding modes:

• Modalità Ordinarja tar-Roti: No electrical assistance. Ride as a traditional bicycle for exercise.
• PAS (Pedal-Assist System) Mode: Provides 5 levels of electrical assistance as you pedal. Ideal for extending range and reducing effort.
• Modalità Elettrika: Full electric power, no pedaling required. Use the throttle for effortless commuting.

Switch between modes using the controls on the handlebar. The 36V 6Ah lithium battery provides approximately 20-30 km range in PAS mode and 20±3 km in pure electric mode.

Figure 3.2: This image illustrates the 36V/6AH lithium battery and the three available riding modes: Ordinary Bicycle, PAS Mode, and Electric Mode, along with their respective ranges.

Sistema tal-Ibbrejkjar

The PEXMOR Electric Bicycle is equipped with front and rear dual disc brakes for reliable stopping power.

• Apply both brake levers simultaneously for optimal and controlled stopping.
• The brake-activated tail light will illuminate upon braking, enhancing visibility to others.

Figura 3.3: Close-up view of the front and rear dual disc brakes, designed for enhanced control and shorter stopping distances.

Operazzjoni tal-Mutur

The 350W high-speed brushless motor (peak 500W) provides assistance up to 15.5 mph (25 km/h) and offers good climbing performance.

Figure 3.4: This diagram highlights the 350W high-speed brushless motor, its climbing capacity, maximum speed of 15.5 mph, and the bike's load capacity of 265 lbs.

4. Manutenzjoni

Regular maintenance ensures the longevity and safe operation of your electric bicycle.

Kura Ġenerali

• Keep the bicycle clean. Wipe down the frame with a damp drapp. Evita li tuża magni tal-ħasil bi pressjoni għolja direttament fuq il-komponenti elettriċi.
• Regularly check all bolts and fasteners for tightness.
• Lubricate the chain periodically with bicycle chain lubricant.

Manutenzjoni tat-Tajers

• Check tire pressure before each ride. Maintain pressure within the recommended range printed on the tire sidewall.
• Inspect tires for wear, cuts, or embedded objects.

Figure 4.1: A close-up of the durable, wear-resistant rubber tire, designed to adapt to various terrains including beach, gravel, and flat roads.

Kura tal-batterija

• Charge the battery regularly, even if the bicycle is not in use, to maintain its health.
• Aħżen il-batterija f'post frisk u niexef.
• If storing for an extended period, charge the battery to approximately 50-70% capacity.

5 Issolvi l-problemi

This section addresses common issues you might encounter with your PEXMOR Electric Bicycle.

Ebda Qawwa

• Iċċekkja l-Iċċarġjar tal-Batterija: Kun żgur li l-batterija hija kompletament iċċarġjata.
• Iċċekkja l-Konnessjonijiet: Verify that the battery is properly seated and all electrical connections are secure.
• Buttuna tal-Qawwa: Ensure the power button on the LED display is pressed and held correctly to turn on the system.

Motor Not Assisting

• Check Riding Mode: Ensure the bicycle is in PAS mode or Electric mode, not Ordinary Bicycle mode.
• Pedal-Assist Sensor: In PAS mode, ensure you are pedaling for the motor to engage.
• Lievi tal-brejk: Some e-bikes have safety cut-off switches on the brake levers. Ensure brake levers are not partially engaged.

Brakes Squealing or Ineffective

• Ilbies tal-Kuxxinetti tal-Brejk: Inspect brake pads for wear. Replace if necessary.
• Allinjament tad-Diska: Check if the brake discs are clean and not warped.
• Aġġustament: Brake cables may need adjustment. Consult a bicycle mechanic if unsure.

6. Speċifikazzjonijiet

Detailed technical specifications for the PEXMOR 14" Folding Commuter City Electric Bicycle, Model 08-WH.

7. Garanzija u Appoġġ

Informazzjoni dwar Garanzija

Specific warranty details for the PEXMOR Electric Bicycle Model 08-WH are not provided in the available product information. Please refer to your purchase documentation or contact the retailer for warranty terms and conditions.

Appoġġ għall-Klijent

For technical assistance, parts, or further inquiries, please contact PEXMOR customer support through their official website or the retailer from whom you purchased the product. Always provide your model number (08-WH) and purchase date when seeking support.

You can visit the PEXMOR Store for more information: Ħanut PEXMOR fuq Amazon