ATK Dragonfly A9 Plus Wireless Gaming Mouse Instruction Manual

Introduzzjoni

This manual provides comprehensive instructions for the ATK Dragonfly A9 Wireless Gaming Mouse, specifically the A9 Plus model. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience. The ATK Dragonfly A9 series is designed for precision and performance, featuring a lightweight design, high-precision sensor, and versatile connectivity options.

Immaġni: Fuq view of the ATK Dragonfly A9 Plus Wireless Gaming Mouse, showcasing its ergonomic design and scroll wheel.

Kontenut tal-Pakkett

Verify that all items are present in your package. Contents may vary slightly by specific model (A9 SE, A9, A9 Plus, A9 Pro, A9 Ultra). For the A9 Plus model, the package typically includes:

• ATK Dragonfly A9 Plus Gaming Mouse
• NearLink 1K Dongle
• Braided Data Cable (USB-C)
• Grip Tape x1
• Manwal għall-Utent (dan id-dokument)
• Karta ta' Garanzija

Image: A table detailing the accessories included with each model in the ATK Dragonfly A9 series, including dongles, cables, grip tape, and documentation.

Setup

Iċċarġjar tal-Maws

Before initial use, it is recommended to fully charge the mouse.

1. Connect the provided USB-C braided data cable to the mouse's charging port.
2. Connect the other end of the cable to a USB port on your computer or a USB power adapter.
3. The mouse's indicator light will show charging status. A full charge typically takes 2-3 hours.

Konnessjoni tal-Ġurdien

The ATK Dragonfly A9 Plus supports three connectivity modes: NearLink/2.4GHz wireless, Bluetooth, and USB-C wired.

1. NearLink/2.4GHz Wireless Connection

1. Locate the NearLink 1K Dongle. This dongle can be stored in a compartment on the underside of the mouse for convenience.
2. Insert the NearLink dongle into an available USB port on your computer.
3. Ixgħel il-maws billi tuża l-iswiċċ tal-enerġija li jinsab fil-qiegħ.
4. The mouse should automatically connect to the dongle. If not, refer to the troubleshooting section.

Image: An exploded diagram of the ATK Dragonfly A9 Plus mouse, highlighting the PAW3950/Ultra sensor, Omron Optical Switch, TTC Gold scroll wheel, and the 1K Dongle Storage Compartment on the underside.

2. Konnessjoni Bluetooth

1. Kun żgur li l-Bluetooth tal-kompjuter tiegħek huwa attivat.
2. Turn on the mouse and switch its mode to Bluetooth (refer to the mouse's bottom for mode switch).
3. Fuq il-kompjuter tiegħek, mur fis-settings tal-Bluetooth u fittex apparati ġodda.
4. Agħżel "ATK Dragonfly A9 Plus" mil-lista ta' apparati disponibbli biex tqabbadhom.

3. Konnessjoni bil-Wajer USB-C

1. Connect the provided USB-C braided data cable to the mouse.
2. Qabbad it-tarf l-ieħor tal-kejbil ma 'port USB fuq il-kompjuter tiegħek.
3. The mouse will function immediately in wired mode and will also charge simultaneously.

Istruzzjonijiet Operattivi

Karatteristiċi Ewlenin

• Disinn ħafif: Weighing approximately 53g, the mouse is designed to reduce hand fatigue and improve maneuverability.
• PAW3950 Ultra High-Precision Sensor: Features up to 42,000 DPI, with 8 adjustable DPI levels in 50 DPI increments. DPI settings can be changed via a switch on the bottom of the mouse.
• Rata ta' Votazzjoni ta' 8K: Supports up to 8000Hz polling rate in both wired and wireless modes for ultra-low latency and precise motion tracking.
• Ħajja Estiża tal-Batterija: Equipped with an 800mAh battery, providing up to 240 hours of use on NearLink connection after a 2-3 hour charge.
• Konnettività Tri-Modalità: Seamlessly switch between NearLink/2.4GHz wireless, Bluetooth, and USB-C wired connections.
• Ice-Feel Coating: The A9 Plus model features an Ice-Feel coating for a cool, smooth, non-slip, and stain-resistant grip.

Image: An infographic displaying key features: True Dual 8K Polling Rate, 53g lightweight design, 800mAh High-Capacity Battery, PAW3950Ultra Flagship Sensor, Nordic52840 Flagship MCU, suitability for Gaming & Work, ATK ApexShark Professional Esports Firmware, and NearLink Connection support.

Immaġni: Close-up view of the ATK Dragonfly A9 Ultra mouse, emphasizing the "Ice-Feel Coating" for a cool, smooth, non-slip, and stain-resistant grip. Note: This feature applies to A9 Plus, A9 Pro, and A9 Ultra models.

Aġġustament DPI

The DPI (Dots Per Inch) can be adjusted directly on the mouse to suit your preference.

• Sib il-buttuna tas-swiċċ tad-DPI fil-qiegħ tal-maws.
• Press the button to cycle through the 8 available DPI levels.
• The current DPI setting is indicated by an LED light (refer to the full user manual for specific LED patterns).

Ir-Rata tal-Votazzjoni

The ATK Dragonfly A9 Plus supports up to an 8000Hz polling rate. To utilize this feature, ensure your computer meets the recommended specifications:

• CPU: Intel Core i7 9700K or higher, AMD Ryzen 7 3700X or higher
• Monitor: 240Hz refresh rate or above
• Karta Grafika: NVIDIA GTX 1080 jew ogħla, AMD RX 5700 jew ogħla
• Memorja: 16GB jew aktar

Note: An 8K Dongle may be required for 8KHz wireless polling rate, which might be sold separately depending on the model. The A9 Plus model comes with a NearLink 1K Dongle.

Image: A visual representation of 8000Hz polling rate compared to 1000Hz, emphasizing smoother tracking. Below it, a "Friendly Reminder" lists the recommended PC specifications (CPU, Monitor, Graphics Card, Memory) for optimal experience with an 8KHz ATK mouse.

Manutenzjoni

Tindif

• Uża drapp artab u niexef biex timsaħ il-wiċċ tal-maws.
• Għal ħmieġ iebes, neħħi ftitampLaħlaħ id-drapp bl-ilma jew b'soluzzjoni ħafifa tat-tindif. Evita kimiċi ħarxa.
• Tħallix likwidi jidħlu fil-komponenti interni tal-maws.
• Regularly clean the optical sensor area on the bottom of the mouse with a cotton swab to ensure accurate tracking.

Ħażna

• Aħżen il-maws f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Meta ma tkunx qed tużah għal perjodi twal, itfi l-maws biex tikkonserva l-ħajja tal-batterija.
• The NearLink dongle can be stored in its dedicated compartment on the mouse's underside.

Issolvi l-problemi

Il-maws ma jirrispondix

• Iċċekkja l-Enerġija: Ensure the mouse is turned on and has sufficient battery charge. Connect it via USB-C cable to check if it works in wired mode.
• Iċċekkja l-Konnessjoni:
  • Wireless (NearLink/2.4GHz): Ensure the dongle is securely plugged into a USB port and the mouse is in 2.4GHz mode. Try a different USB port.
  • Bluetooth: Verify Bluetooth is enabled on your computer and the mouse is in Bluetooth pairing mode. Re-pair the device if necessary.
  • Wajer: Kun żgur li l-kejbil USB-C huwa konness sew kemm mal-maws kif ukoll mal-kompjuter.
• Ibda mill-ġdid: Restart your computer and the mouse.

Tracking Issues / Inaccurate Movement

• Sensor Nadif: Naddaf is-senser ottiku fil-qiegħ tal-maws.
• Wiċċ: Use the mouse on a clean, non-reflective mouse pad or surface. Avoid glass or highly reflective surfaces.
• Twaqqif DPI: Adjust the DPI setting to a level suitable for your use.

Lag or Delay in Wireless Mode

• Interferenza: Move the mouse closer to the dongle. Avoid placing the dongle near other wireless devices (e.g., Wi-Fi routers, other wireless peripherals) that might cause interference.
• Rata tal-votazzjoni: Ensure your system meets the requirements for 8KHz polling rate if you are using it. If not, consider lowering the polling rate.
• Livell tal-batterija: Low battery can sometimes affect wireless performance. Charge the mouse.

Speċifikazzjonijiet

The following specifications apply to the ATK Dragonfly A9 Plus Wireless Gaming Mouse:

Image: A detailed comparison table outlining specifications for various ATK Dragonfly A9 series models (A9 SE, A9, A9 Plus, A9 Pro, A9 Ultra), including dimensions, coating, sensor, MCU, transmission technology, polling rate, battery capacity, battery life, and weight.

Garanzija u Appoġġ

For warranty information, please refer to the warranty card included in your product package.

For technical support or further assistance, please visit the official ATKGEAR store on Amazon: ATKGEAR Store.