1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Morimoto XB Evo Hybrid LED Headlights. These headlights are designed to enhance the lighting performance and aesthetic of your Toyota 4Runner (2014-2024) with advanced Bi-LED projectors, bright Daytime Running Lights (DRL), and amber LED turn signals. Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety.
Image 1.1: Toyota 4Runner equipped with Morimoto XB Evo Hybrid LED Headlights.
2. Informazzjoni dwar is-Sigurtà
Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury, damage to the product, or vehicle damage.
- Disconnect the vehicle's battery before beginning any electrical work to prevent electrical shock or short circuits.
- Ilbes tagħmir protettiv personali xieraq, inklużi nuċċalijiet u ingwanti tas-sigurtà.
- Kun żgur li l-vettura tkun ipparkjata fuq wiċċ livellat bil-brejk tal-ipparkjar attivat.
- Allow the vehicle's engine and any hot components to cool down before working.
- Jekk m'intix ċert dwar xi pass tal-proċess tal-installazzjoni, ikkonsulta tekniku tal-karozzi kwalifikat.
- Do not modify the headlight assemblies or wiring harnesses, as this may void the warranty and compromise safety.
3. Kontenut tal-Pakkett
Verify that all components are present and undamaged before proceeding with installation. The package should contain the following items:
- Pair of Morimoto XB Evo Hybrid LED Headlight Assemblies (Left and Right)
- Plug and Play Wiring Harnesses (specific to vehicle's original headlight type)
- DRL Harness
- DRL Harness Extension
- Tektek tal-fjus
- OE LED Harnesses (if applicable)
- OE Halogen Harnesses (if applicable)
- Resistors (if applicable)
- 9005 Connector Caps (if applicable)
Image 3.1: Morimoto XB Evo Hybrid LED Headlights and included wiring components.
Immaġni 3.2: Dettaljata view of the various wiring harnesses and accessories.
4. Setup u Installazzjoni
4.1. Għodod Meħtieġa
- Sett ta' Socket Wrench
- Għodda għat-Tneħħija tal-Panew
- Tornaviti (Phillips u Flathead)
- Wire Strippers/Crimpers (if custom wiring is needed, though typically plug-and-play)
- Multimetru (għall-ittestjar tal-konnessjonijiet)
- Zip Ties or Cable Management Clips
4.2. Passi ta 'qabel l-installazzjoni
- Ipparkja l-vettura fuq wiċċ ċatt u stabbli u daħħal il-brejk tal-ipparkjar.
- Itfi l-magna u neħħi ċ-ċavetta mill-ignition.
- Skonnettja t-terminal negattiv tal-batterija tal-vettura.
- Allow the engine bay to cool down completely.
4.3. Headlight Removal
- Carefully remove any plastic clips, bolts, or screws securing the front bumper cover.
- Gently pull the bumper cover away from the vehicle to access the headlight mounting bolts. It may not be necessary to fully remove the bumper, only to loosen it sufficiently.
- Locate and remove the bolts securing the factory headlight assembly. Typically, there are bolts on the top, side, and sometimes underneath the headlight.
- Carefully pull the factory headlight assembly forward, disconnecting all electrical connectors from the rear of the housing.
- Irrepeti l-proċess għan-naħa l-oħra.
4.4. Konnessjonijiet tal-Wiring
The Morimoto XB Evo Hybrid headlights feature a plug-and-play design. The specific harnesses used will depend on whether your 4Runner originally came with LED or Halogen headlights.
- Identify Original Headlight Type: Determine if your vehicle originally had LED or Halogen headlights. Select the corresponding Morimoto wiring harness (OE LED Harnesses or OE Halogen Harnesses).
- Connect Main Headlight Harness: Connect the appropriate Morimoto main headlight harness to the vehicle's factory headlight connector.
- DRL Harness Connection: Connect the DRL Harness to the designated port on the new headlight assembly. Use the DRL Harness Extension if needed for proper routing.
- Fuse Tap Installation: Install the provided Fuse Tap into an appropriate fuse slot in the vehicle's fuse box (refer to your vehicle's owner's manual for an accessory fuse location). Connect the DRL harness to the fuse tap. This provides power for the Daytime Running Lights.
- Resistor Installation (if applicable): If your vehicle requires resistors to prevent hyper-flashing or bulb-out warnings (common with some halogen-to-LED conversions), securely mount the resistors to a metal surface away from plastic components, as they can generate heat. Connect them as per the included resistor instructions.
- 9005 Connector Caps (if applicable): Use these caps to seal any unused connectors.
- Kun żgur li l-konnessjonijiet kollha huma siguri u mqiegħda sew.
4.5. Headlight Installation
- Carefully guide the new Morimoto XB Evo Hybrid LED Headlight assembly into the opening. Ensure all wiring is tucked away and not pinched.
- Align the mounting points and secure the headlight assembly with the factory bolts removed earlier. Do not overtighten.
- Repeat for the other headlight.
- Reinstall the front bumper cover, ensuring all clips, bolts, and screws are reattached securely.
4.6. Verifiki ta' wara l-Installazzjoni
- Erġa' qabbad it-terminal negattiv tal-batterija tal-vettura.
- Turn on the vehicle's ignition and test all lighting functions: Daytime Running Lights, Low Beams, High Beams, and Turn Signals.
- Verify that there are no dashboard warning lights related to the headlights.
- Perform a headlight aiming adjustment. This is crucial for proper light distribution and to avoid blinding oncoming traffic. Consult your vehicle's service manual or a professional for correct aiming procedures.
5. Istruzzjonijiet Operattivi
Your Morimoto XB Evo Hybrid LED Headlights are designed to integrate seamlessly with your vehicle's existing lighting controls.
5.1. Daytime Running Lights (DRL)
The integrated white LED DRLs will illuminate automatically when the vehicle is running and the headlights are off, or as per your vehicle's DRL settings. These provide enhanced visibility during daylight hours.
Image 5.1: Headlights with DRLs active.
5.2. Low Beam
Activate the low beams using your vehicle's standard headlight switch. The Bi-LED projectors will provide a wide and bright light pattern for general night driving, compliant with DOT standards.
5.3. Raġġ Għoli
Engage the high beams using your vehicle's standard high beam control. The Bi-LED projectors will switch to a more focused, intense beam pattern to illuminate further down the road.
5.4. Sinjali tad-dawran
The amber LED turn signals will activate with a fade-off effect when your vehicle's turn signal lever is engaged. Ensure they flash at the correct rate.
Image 5.2: Headlights with amber turn signals active.
6. Manutenzjoni
Proper maintenance ensures the longevity and optimal performance of your Morimoto XB Evo Hybrid LED Headlights.
6.1. Tindif
- Clean the headlight lenses regularly with a soft cloth and mild automotive soap or glass cleaner.
- Avoid abrasive cleaners or harsh chemicals, as these can damage the polycarbonate lens material.
- Laħlaħ sewwa bl-ilma biex tneħħi kwalunkwe residwu tas-sapun.
6.2. Spezzjoni
- Periodically inspect the headlight assemblies for any signs of damage, cracks, or moisture intrusion.
- Check all wiring connections to ensure they remain secure and free from corrosion.
- Verify that all lighting functions (DRL, low beam, high beam, turn signals) are operating correctly.
7 Issolvi l-problemi
This section addresses common issues you might encounter with your headlights.
| Ħruġ | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-fanali ta’ quddiem ma jixegħlux | Loose wiring connection, blown fuse, incorrect harness selection | Check all wiring connections, inspect vehicle fuses, ensure correct OE harness is used. |
| DRLs not working | Fuse tap not installed correctly, DRL harness disconnected, blown fuse | Verify fuse tap connection and fuse, check DRL harness connections. |
| Turn signals hyper-flashing | Resistors not installed or faulty, vehicle's flasher relay incompatibility | Ensure resistors are correctly installed and functioning. Consult a technician if issue persists. |
| Moisture inside headlight | Improper seal, condensation (temporary) | Small amounts of condensation are normal and should dissipate. If persistent or large water droplets, inspect seals and contact support. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Mudell | XB Evo Hybrid (LF2-531Y) |
| Applikazzjoni | Toyota 4Runner (2014-2024) |
| Sors tad-Dawl | OE-grade Automotive LEDs (Japan) |
| Tip ta' Proġekter | Bi-LED |
| DRL Color | LED abjad |
| Turn Signal Color | Amber LED with Fade-off Effect |
| Materjal tal-Lenti | Polikarbonat |
| Kulur tal-Lenti | Ċara |
| Karatteristiċi Speċjali | Dustproof, Waterproof |
| Konformità | DOT Compliant (USA) |
| Piż tal-oġġett | 19 pounds (pair) |
| Dimensjonijiet tal-Pakkett | 32 x 26 x 11.5 pulzieri |
| UPC | 840203374948 |
9. Garanzija u Appoġġ
Morimoto stands behind the quality of the XB Evo Hybrid LED Headlights with an industry-leading garanzija ta' ħames snin. This warranty covers manufacturing defects and ensures the product performs as intended under normal use.
For warranty claims, technical assistance, or any questions regarding your Morimoto product, please contact Morimoto customer support through their official website or authorized dealers. When contacting support, please have your purchase information and product model number (LF2-531Y) available.
