SUPERONE X11

Manwal tal-Istruzzjonijiet tal-Ċarġer tal-Muntatura tal-Karozza SUPERONE MagSafe

Brand: SUPERONE | Model: X11

Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of your SUPERONE MagSafe Car Mount Charger. Designed for convenience and efficiency, this magnetic wireless car charger offers secure mounting and fast charging for your iPhone 12-16 series and MagSafe-compatible devices. Please read this manual thoroughly before use to ensure optimal performance and safety.

Karatteristiċi tal-Prodott

X'hemm fil-Kaxxa

Setup Istruzzjonijiet

  1. Agħżel Post tal-Immuntar: Select a flat, clean surface on your car's windshield, dashboard, or panel. Ensure the chosen location does not obstruct your view jew jinterferixxu mal-kontrolli tas-sewqan.
  2. Ipprepara l-wiċċ: Clean the chosen mounting surface thoroughly with an alcohol wipe and allow it to dry completely. This ensures optimal adhesion for the suction cup.
  3. Apply Dash Pad (Optional, for textured dashboards): If mounting on a textured dashboard, first apply the included washable adhesive dash pad to the cleaned surface. Press firmly across the pad's edges to ensure even adhesion. Wait approximately 15 minutes after applying the pad before attaching the mount to allow the adhesive to set.
  4. Waħħal il-Muntanja: Place the suction cup of the mount onto the prepared surface (or dash pad). Press down firmly on the suction cup, then push the locking lever down to create a vacuum seal.
  5. Qabbad l-Enerġija: Connect the provided USB-C cable to the USB-C port on the car mount charger and plug the other end into a car charger adapter (a 20W+ USB-C Power Delivery (PD) adapter is recommended for best charging results). The ambient light on the charger will illuminate, indicating it has power.
Image showing the SUPERONE MagSafe car mount charger with a phone attached, illustrating its setup in a car interior.

Proper installation ensures a secure and stable charging experience.

Istruzzjonijiet Operattivi

  1. Waħħal it-Telefown Tiegħek: Align your MagSafe-compatible iPhone (12-16 series) or MagSafe-enabled case with the magnetic charging surface of the mount. The strong N55 magnets will automatically snap your phone into place, ensuring proper alignment for wireless charging.
  2. Iċċarġjar bla fili: Once your phone is securely attached and the mount is powered, wireless charging will begin automatically. The ambient light may indicate charging status (refer to product specific light indicators if available).
  3. L-aġġustament ViewIng Angolu:
    • Rotazzjoni 360°: The magnetic charging head can be rotated 360 degrees to switch between portrait and landscape vieworjentazzjonijiet tal-ing.
    • Dual-Axis Adjustment: Utilize the dual-axis folding metal arms to adjust the height and distance of your phone, finding the optimal viewing angle for navigation or media consumption.
  4. It-Tneħħija tat-Telefon Tiegħek: Gently pull your phone away from the magnetic charging surface. Due to the strong magnetic hold, it is recommended to hold the base of the mount with one hand while removing your phone with the other, especially if the mount is on a dash pad.
Image demonstrating the 360-degree rotation and dual-axis adjustment capabilities of the mount.

Easily adjust your phone's position for optimal viewing u interazzjoni.

Manutenzjoni

Issolvi l-problemi

ProblemaKawża PossibbliSoluzzjoni
Slow or No Charging
  • Insufficient power from car adapter.
  • Phone not properly aligned on charging surface.
  • Non-MagSafe case interfering with charging.
  • Ensure your car adapter provides at least 20W USB-C Power Delivery (PD).
  • Re-position phone to ensure it snaps centrally onto the magnetic surface.
  • Use a MagSafe-compatible case or remove the case for charging.
Mount Loses Suction/Falls Off
  • Surface not clean or dry during installation.
  • Varjazzjonijiet estremi fit-temperatura.
  • Suction cup is dirty.
  • Clean the mounting surface and suction cup thoroughly with alcohol and dry completely before re-applying.
  • Re-apply the mount, ensuring the locking lever is fully engaged.
  • Rinse the suction cup with water and air-dry to restore stickiness.
It-Telefon Mhux Qiegħed sew
  • Using a non-MagSafe case or a very thick case.
  • Phone not centered on the magnetic surface.
  • Ensure you are using a MagSafe-compatible phone or case. Non-MagSafe cases will significantly reduce magnetic strength.
  • Ensure the phone is properly aligned and snapped onto the magnetic charging surface.

Speċifikazzjonijiet

KaratteristikaDettall
BrandSUPERONE
Numru tal-MudellX11
Piż tal-oġġett5.9 uqija
Dimensjonijiet tal-Pakkett3.19 x 3.19 x 2.32 pulzieri
Apparati KompatibbliiPhone 16/15/14/13/12 Series and MagSafe Cases
Tip ta 'ImmuntarSuction Car Phone Mount Charger (Windshield/Dash)
Karatteristiċi SpeċjaliFoldable, One-Hand Operation, Rotatable
Qawwa Manjetika24 N55 Magnets, up to 2800gf
Suction Cup DurabilitySupports up to 88 lbs, -40°F to 300°F
ManifatturDongguan Bingli Changcheng Technology Co., Ltd.

Garanzija u Appoġġ

SUPERONE jipprovdi 18-Month Hassle-free WARRANTY for this MagSafe Car Mount Charger, ensuring peace of mind regarding your purchase. We also offer LIFETIME SUPPORT għall-prodotti tagħna.

Should you encounter any issues or have questions regarding your magnetic phone holder for car, please do not hesitate to contact our customer service team. We are committed to responding to all inquiries within 12 hours.

For support, please refer to the contact information provided on the product packaging or the official SUPERONE websit.

Dokumenti Relatati - X11

Preview Gwida għall-Utent tal-Ċarġer tal-Karozza Manjetika SUPERONE
Gwida komprensiva għall-Ċarġer Manjetiku tal-Karozza SUPERONE, li tiddeskrivi l-karatteristiċi, l-installazzjoni, it-tħaddim, u s-soluzzjoni tal-problemi għall-iPhone 12/13/14/15/16 u apparati kompatibbli.
Preview Muntatura Manjetika tal-Karozza għal iPhone 12/13/14 u Aktar - Mudell Adeżiv 3M
Informazzjoni dettaljata dwar il-Superone Magnetic Car Mount għall-iPhone 12/13/14 u aktar. Karatteristiċi, struzzjonijiet għall-installazzjoni, prekawzjonijiet ta' sigurtà, u dettalji tal-garanzija għall-mudell bil-kolla 3M.
Preview SUPERONE MagSafe Manjetiku tal-Karozza għall-iPhone 12-15: Gwida għall-Installazzjoni
Din il-gwida tipprovdi struzzjonijiet dettaljati għall-installazzjoni u l-użu tal-muntatura manjetika tal-karozza SUPERONE MagSafe, iddisinjata għas-serje iPhone 12, 13, 14, u 15. Tgħallem dwar il-karatteristiċi tal-prodott, il-passi tal-installazzjoni, prekawzjonijiet importanti, u informazzjoni dwar il-garanzija.
Preview Gwida għall-Utent tal-Adapter tal-Lajter tas-Sigaretti b'ħafna portijiet SUPERONE C48Q
Gwida komprensiva għall-utent għall-adapter tal-ċarġer tal-karozza b'ħafna portijiet SUPERONE C48Q. Tgħallem dwar il-karatteristiċi tiegħu, inklużi portijiet doppji USB-A QC3.0, iċċarġjar tat-Tip C PD ta' 20W, żewġ sokits tal-lajter tas-sigaretti ta' 12V-24V, voltagWiri elettroniku, u protezzjonijiet tas-sigurtà. Jinkludi s-setup, il-prekawzjonijiet, l-ispeċifikazzjonijiet, u l-informazzjoni dwar il-garanzija.
Preview Manwal tal-Utent tal-Ċarġer tal-Karozza USB Veloċi SUPERONE 36W 6A
Manwal komprensiv għall-utent għall-Ċarġer tal-Karozza USB Fast SUPERONE 36W 6A. Jiddeskrivi karatteristiċi bħal korp tar-ram pur, portijiet doppji PD/QC 3.0, u protezzjonijiet tas-sigurtà. Jinkludi speċifikazzjonijiet tekniċi, noti dwar l-użu, u informazzjoni dwar il-garanzija.
Preview Manwal tal-Utent tal-Ċarġer tal-Karozza li Jinġibed 'il Quddiem SUPERONE - Iċċarġjar Mgħaġġel, Soluzzjoni 4 f'1
Manwal komprensiv għall-utent għaċ-Ċarġer tal-Karozza li Jinġibed lura SUPERONE (Mudell PT-16). Tgħallem dwar il-karatteristiċi tiegħu inklużi kejbils li jinġibdu lura kompletament, kapaċitajiet ta' ċċarġjar 4-f'1, volumtagWiri elettroniku, u protezzjonijiet minn madwaru kollu. Jinkludi speċifikazzjonijiet dettaljati u informazzjoni dwar il-garanzija.