Argon Audio TT MK2 Turntable User Manual

Introduzzjoni

Grazzi tax-xiriasing the Argon Audio TT MK2 Turntable. This manual provides essential information for the safe and optimal operation, setup, and maintenance of your new turntable. Please read this manual thoroughly before using the product and retain it for future reference.

The Argon Audio TT MK2 is designed to deliver high-fidelity audio playback from your vinyl records, featuring a built-in phono pre-amplifier, an Audio Technica AT3600 cartridge, and dual-speed control for 33 and 45 RPM records.

Istruzzjonijiet Importanti dwar is-Sigurtà

Biex tnaqqas ir-riskju ta' xokk elettriku, nar, jew ħsara lill-unità, jekk jogħġbok osserva l-prekawzjonijiet ta' sigurtà li ġejjin:

• Tesponix dan l-apparat għax-xita jew l-umdità.
• Tpoġġix oġġetti mimlija b'likwidi, bħal vażuni, fuq l-apparat.
• Timblokkax il-fetħiet tal-ventilazzjoni. Installa skont l-istruzzjonijiet tal-manifattur.
• Tinstallax ħdejn xi sorsi tas-sħana bħal radjaturi, reġistri tas-sħana, stufi, jew apparat ieħor (inkluż amplifiers) li jipproduċu sħana.
• Ipproteġi l-korda tad-dawl milli tkun mixi jew maqrusa, partikolarment fil-plakek, fil-kontenituri tal-konvenjenza, u fil-punt fejn joħorġu mill-apparat.
• Uża biss aċċessorji/aċċessorji speċifikati mill-manifattur.
• Aqla’ dan l-apparat waqt maltempati tas-sajjetti jew meta ma jintużax għal perjodi twal ta’ żmien.
• Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat. Is-servizz huwa meħtieġ meta l-apparat ikun ġie bil-ħsara b'xi mod, bħal korda tal-provvista tal-enerġija jew plagg ikun bil-ħsara, likwidu jkun inxtered jew oġġetti jkunu waqgħu fl-apparat, l-apparat ikun ġie espost għax-xita jew umdità, ma jaħdimx b'mod normali , jew twaqqgħet.

X'hemm fil-Kaxxa

Carefully unpack all components and ensure all items are present before discarding packaging materials:

• Argon Audio TT MK2 Turntable Unit
• Audio Technica AT3600 Cartridge (pre-mounted)
• Dust Lid
• RCA Cable
• Adapter tal-Enerġija
• Kontrapiż
• Piż kontra l-iskate
• Platter and Drive Belt
• Feltru Mat

Image: The Argon Audio TT MK2 Turntable with its clear dust cover in place, showcasing its sleek black finish.

Gwida ta' Setup

1 Tqegħid

Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure there is enough space around the unit for ventilation and operation.

2. Installazzjoni tal-Platt u ċ-Ċinturin

1. Carefully place the metal platter onto the spindle.
2. Locate the drive belt. Gently stretch the belt around the inner rim of the platter and hook it onto the motor pulley. Ensure the belt is not twisted.
3. Poġġi t-tapit tal-feltru fuq il-platter.

Image: The Argon Audio TT MK2 Turntable with its dust cover removed, showing the platter and tonearm assembly.

3. Cartridge and Tonearm Setup

The Audio Technica AT3600 cartridge comes pre-mounted on the tonearm. Follow these steps to balance the tonearm and set the tracking force:

1. Remove the stylus protector from the cartridge.
2. Gently release the tonearm from its rest.
3. Rotate the counterweight at the rear of the tonearm until the tonearm floats freely and is perfectly balanced horizontally.
4. Once balanced, hold the counterweight steady and rotate the numbered ring on the front of the counterweight to "0".
5. Rotate the entire counterweight (including the numbered ring) counter-clockwise until the desired tracking force is set. For the AT3600 cartridge, the recommended tracking force is typically 3.5 grams.

Immaġni: Close-up view of the tonearm's counterweight and anti-skate mechanism, showing the numerical scale for adjustment.

4. Aġġustament Kontra l-Iskjatar

Attach the anti-skate weight to the small loop on the tonearm and hang it over the second groove of the anti-skate support rod. This helps prevent the stylus from skipping inwards.

5. Connecting to Audio System

The TT MK2 features a built-in phono pre-amplifier, allowing direct connection to powered speakers or an amplifier's line-level input. If your amplifier has a dedicated "Phono" input, you can bypass the internal pre-amp.

1. Connect the supplied RCA cable from the "RCA OUT" jacks on the rear of the turntable to the corresponding input on your amplifier or powered speakers (e.g., "AUX", "LINE IN").
2. Locate the "RIAA" switch on the rear of the turntable.
   • Set the switch to "ON" if connecting to a line-level input (e.g., AUX, CD) on your amplifier or directly to powered speakers. This activates the internal phono pre-ampaktar ħaj.
   • Set the switch to "OFF" if connecting to a dedicated "Phono" input on your amplifier. This bypasses the internal phono pre-amplifier, as your amplifier will provide the necessary RIAA equalization.

Image: The rear panel of the Argon Audio TT MK2 Turntable, showing the RCA output jacks, the RIAA (Phono/Line) switch, and the DC 12V power input.

6. Konnessjoni tal-Enerġija

Connect the supplied power adapter to the "DC IN 12V" port on the rear of the turntable, then plug the adapter into a wall outlet.

Istruzzjonijiet Operattivi

1. Tixgħil / Mitfi

Use the power switch located on the rear panel to turn the turntable ON or OFF.

2. Selecting Playback Speed

The TT MK2 supports two playback speeds: 33 1/3 RPM for LPs and 45 RPM for singles. Use the speed selection knob on the top right of the turntable to switch between "33" and "45".

Image: A close-up of the Audio Technica AT3600 cartridge mounted on the tonearm, alongside the "STOP" and "START" buttons and the 33/45 RPM speed selection knob.

3. Daqq Rekord

1. Poġġi diska fuq il-platter, waqt li tiżgura li tkun iċċentrata.
2. Select the correct speed (33 or 45 RPM) using the speed knob.
3. Press the "START" button. The platter will begin to rotate.
4. Erfa' d-driegħ bil-mod billi tuża l-lieva tal-kjuwijiet.
5. Pożizzjona d-driegħ tat-tone fuq il-kanal tal-bidu mixtieq tar-rekord.
6. Slowly lower the cueing lever to gently drop the stylus onto the record.

4. Waqfien tal-Daqq

1. At the end of a record, the tonearm will not automatically return. Gently lift the tonearm using the cueing lever.
2. Erġa’ lura t-tonearm fil-pożizzjoni tiegħu u waħħalha bil-klipp tat-tonearm.
3. Press the "STOP" button to halt platter rotation.
4. Carefully remove the record.

Manutenzjoni

1. Tindif tal-Istilus

The stylus (needle) should be cleaned regularly to ensure optimal sound quality and prevent damage to your records. Use a soft brush designed for stylus cleaning, brushing gently from back to front (away from the cantilever).

2. Rekords tat-Tindif

Always handle records by their edges. Use a carbon fiber brush or a dedicated record cleaning solution and cloth to remove dust and debris before each play.

3. Tindif tat-Turntable

Wipe the turntable chassis and dust cover with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp cloth can be used, followed by a dry cloth. Avoid using harsh chemicals or abrasive cleaners.

4. Kura tal-Għatu tat-Trab

The dust cover protects your turntable from dust. When not in use, keep the dust cover closed. Clean it gently with a soft, damp cloth to avoid scratching the acrylic surface.

Issolvi l-problemi

If you experience issues with your Argon Audio TT MK2 Turntable, please consult the following table before contacting support:

Speċifikazzjonijiet

Garanzija u Appoġġ

Argon Audio products are designed and manufactured to the highest quality standards. This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Argon Audio websit għal termini u kundizzjonijiet dettaljati tal-garanzija.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact your authorized Argon Audio dealer or Argon Audio customer service directly. Contact information can typically be found on the Argon Audio websit.