AstroAI P12 6000A Jump Starter User Manual

1. Prodott Aktarview

The AstroAI P12 Jump Starter is a portable device designed to jump start vehicles with dead batteries. It also functions as a power bank for electronic devices and includes an LED flashlight. This unit is compatible with all gas engines and diesel engines up to 12L.

Image 1.1: AstroAI P12 Jump Starter with attached smart battery clamps.

2. X'inhu Inkluż

Il-pakkett fih l-oġġetti li ġejjin:

• AstroAI P12 Jump Starter Unit
• Smart Battery Clamps
• Borża tal-Ħażna
• USB AC Cable
• Manwal għall-Utent (dan id-dokument)

Image 2.1: All components included in the AstroAI P12 Jump Starter package.

3. Informazzjoni dwar is-Sigurtà

Aqra t-twissijiet u l-istruzzjonijiet kollha tas-sigurtà qabel ma tuża dan il-prodott. Jekk ma ssegwix it-twissijiet u l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, u/jew korriment serju.

Prekawzjonijiet Ġenerali tas-Sigurtà:

• Do not operate the jump starter if it has been damaged or modified.
• Tesponix il-jump starter għax-xita jew għal kundizzjonijiet imxarrbin.
• Tużax aċċessorji mhux rakkomandati jew mibjugħa mill-manifattur.
• Żgura ventilazzjoni xierqa waqt l-użu.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Wear eye protection when operating.

Protezzjonijiet Inkorporati:

The AstroAI P12 includes 10 comprehensive safety protections:

• Protezzjoni b'lura tal-Polarità
• Protezzjoni ta 'kurrent żejjed
• Protezzjoni ta' ħlas żejjed
• Protezzjoni ta' Discharge Eċċessiva
• Protezzjoni ta 'temperatura għolja u baxxa
• Protezzjoni ta 'Konnessjoni Reverse
• Fuq Voltage Protezzjoni
• Protezzjoni ta 'tagħbija żejda
• Protezzjoni Short Circuit
• Spark-Proof Clamps

Image 3.1: Visual representation of the 10 safety protections integrated into the device.

4. Iċċarġjar tal-Jump Starter

Before initial use, fully charge the AstroAI P12 Jump Starter. It is recommended to recharge the unit every few months to maintain battery health, especially if not used regularly.

1. Connect the provided USB A-C cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB A-C cable to a compatible USB wall adapter (not included) or a powered USB port.
3. The LED indicator on the jump starter will show the charging progress. Charge until the indicator shows 100% or full charge.

A full charge typically takes approximately 4-5 hours from empty.

5. Istruzzjonijiet Operattivi

5.1. Startjar ta' Vettura b'Avvanz

Segwi dawn il-passi bir-reqqa biex tibda l-vettura tiegħek malajr:

1. Ensure the jump starter is sufficiently charged (at least 75% recommended).
2. Turn off the vehicle's ignition and all accessories (lights, radio, etc.).
3. Qabbad il-batterija smart clamps to the jump starter's output port. Ensure it is fully inserted.
4. Waħħal il- aħmar pożittiv (+) clamp mat-terminal pożittiv (+) tal-batterija tal-vettura.
5. Waħħal il- iswed negattiv (-) clamp mat-terminal negattiv (-) tal-batterija tal-vettura.
6. Observe the indicator on the smart battery clamps. If it glows aħdar solidu, the connection is correct and safe to proceed. If it flashes red/green or shows an error, recheck connections and refer to the troubleshooting section.
7. Once the indicator is solid green, start the vehicle's engine.
8. After the engine starts, immediately remove the smart battery clamps from the vehicle battery, first the negative (-) clamp, allura l-pożittiv (+) clamp.
9. Disconnect the smart battery clamps mill-qabża starter.

Image 5.1: Step-by-step visual guide for jump starting a vehicle.

Image 5.2: AstroAI P12 Jump Starter connected to a vehicle battery.

5.2. Użu bħala Power Bank

The AstroAI P12 can charge electronic devices via its USB-A output ports.

• Output USB-A (QC 3.0): 5V;3A, 9V;2A, 12V;1.5A (18W Max)
• Output USB-A: 5V;2A

1. Connect your device's charging cable to one of the USB-A output ports on the jump starter.
2. Qabbad it-tarf l-ieħor tal-kejbil mat-tagħmir elettroniku tiegħek.
3. Il-jump starter jibda jiċċarġja t-tagħmir tiegħek awtomatikament.

Image 5.3: The jump starter functioning as a power bank for various electronic devices.

5.3. L-użu tat-Torċa LED

The built-in LED flashlight offers three modes: illumination, SOS, and strobe.

1. Press and hold the power button for approximately 3 seconds to turn on the flashlight (illumination mode).
2. Press the power button again to cycle through the modes: SOS (flashing) and Strobe.
3. Press and hold the power button again for 3 seconds to turn off the flashlight.

Image 5.4: The AstroAI P12 Jump Starter's LED flashlight in use.

6. Manutenzjoni

• Tindif: Imsaħ l-unità b'ċarruta niexfa u ratba. Tużax kimiċi ħarxa jew materjali li joborxu.
• Ħażna: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. The operating temperature range is -20°C to 50°C (-4°F to 122°F).
• Iċċarġjar mill-ġdid: Erġa' ċċarġja l-unità kull 3-6 xhur, anke jekk ma tkunx qed tintuża, biex ittawwal il-ħajja tal-batterija.
• Batterija Clamps: Spezzjona l-clamps and cables for any damage before each use.

Image 6.1: The AstroAI P12 Jump Starter is designed to operate in a wide range of temperatures.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

Image 8.1: The compact size of the AstroAI P12 Jump Starter.

9. Garanzija u Appoġġ

For warranty information or technical support, please contact AstroAI customer service.

• Manifattur: Astro AI
• Kuntatt Email: Support@astroai.com
• Refer to the official AstroAI websit għall-aktar politika ta' garanzija aġġornata.