1. Introduzzjoni
The ECOVACS DEEBOT T50 PRO OMNI Gen2 is an advanced robotic vacuum and mop cleaner designed to provide comprehensive floor cleaning. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device to ensure optimal performance and longevity.
Figura 1.1: The ECOVACS DEEBOT T50 PRO OMNI Gen2 robot and its accompanying OMNI Station.
2. Setup
2.1 Tneħħija tal-kaxxa u tqegħid
Carefully remove all components from the packaging. Ensure all protective films and packing materials are removed from the robot and the OMNI Station. Place the OMNI Station against a wall in an open area, ensuring there are no obstacles within 1.5 meters in front and 0.5 meters on either side.
2.2 Iċċarġjar inizjali
Place the DEEBOT onto the OMNI Station. Ensure the charging contacts align. The robot will begin charging automatically. For first-time use, fully charge the robot before operation.
2.3 Installazzjoni u Tqabbil tal-App
- Download the ECOVACS HOME app from your device's app store.
- Oħloq kont jew idħol.
- Follow the in-app instructions to add your DEEBOT T50 PRO OMNI Gen2. This typically involves scanning a QR code on the robot and connecting to your home Wi-Fi network.
2.4 Immappjar Inizjali
After successful pairing, initiate a mapping run through the app. The robot will navigate your home to create a detailed map, which is crucial for efficient cleaning and advanced features. The dToF LiDAR module and AIVI 3D 3.0 OMNI-Approach technology enable precise and rapid mapping.
Figura 2.1: The DEEBOT utilizes TrueMapping 2.0 for quick and efficient home mapping.
2.5 Filling Water Tanks and Detergent
Fill the clean water tank on the OMNI Station with tap water. If desired, add the recommended ECOVACS detergent solution to the designated compartment. The OMNI Station features automatic detergent addition for convenience.
3. Operating the DEEBOT
3.1 Modi tat-Tindif
The DEEBOT T50 PRO OMNI Gen2 offers various cleaning modes accessible via the ECOVACS HOME app:
- Vakwu Biss: Għat-tneħħija ta' debris niexef.
- Mopp Biss: Għat-tindif bl-imxarrab.
- Vacuum & Mop: Vacuum cleaner u mopping simultanji.
- Vacuum cleaner imbagħad Mopp: Completes vacuuming first, then proceeds with mopping.
3.2 Edge Cleaning and Obstacle Avoidance
The TruEdge 2.0 technology allows the side brush to extend dynamically, reaching deep into corners and maintaining a 1mm proximity to edges for 100% coverage. The AIVI 3D 3.0 OMNI-Approach with 3D structured light and RGB camera enables real-time recognition and identification of obstacles, using their contours for precise edge cleaning and avoidance.
Figura 3.1: TruEdge 2.0 ensures thorough cleaning along walls and in corners.
Figura 3.2: AIVI 3D 3.0 technology allows the robot to recognize and avoid obstacles effectively.
3.3 Suction Power and ZeroTangle 2.0
With 21,000 Pa of suction power, the DEEBOT effectively removes dirt and debris. The ZeroTangle 2.0 technology, featuring triple V-shaped structures, actively collects, lifts, and untangles hair, ensuring a 0% tangle rate even with long hair.
Figura 3.3: Powerful suction and tangle-free brush system for efficient cleaning.
3.4 Sistema ta 'mopping
The OZMO TURBO 2.0 mopping system features two high-speed rotating pads (180 rotations/min) to remove stubborn stains. The automatic mop lifting function raises the pads by up to 9mm when detecting carpets, preventing them from getting wet.
Figura 3.4: The mopping system effectively removes stains and protects carpets.
3.5 Smart Control and Monitoring
Control your DEEBOT using the ECOVACS HOME app, YIKO voice assistant, Google Home, or Amazon Alexa. The app allows for customized cleaning schedules, zone cleaning, and real-time video monitoring via the robot's 960P camera, ensuring privacy protection.
Figura 3.5: Multiple control options for convenient operation.
4. Manutenzjoni
4.1 OMNI Station Functions
The OMNI Station provides comprehensive self-maintenance:
- Tbattil Awtomatiku tat-Trab: The robot's dustbin is automatically emptied into a sealed bag in the station.
- Hot Air Drying (45°C): Mop pads are dried with 45°C hot air to prevent odors and mildew.
- Automatic Detergent Addition: The station automatically adds the correct amount of detergent to the clean water.
- Hot Water Mop Washing (75°C): Mop pads are washed with 75°C hot water to dissolve dirt and stains.
- Automatic Base Cleaning: Bidirectional scrapers clean the bottom of the station, ensuring it remains clean.
Figura 4.1: The OMNI Station handles most maintenance tasks automatically.
4.2 Regular Cleaning of Robot Components
- Trabbin u Filtru: Regularly empty the robot's internal dustbin (if not using auto-empty) and clean the filter.
- Main Brush and Side Brushes: Remove and clean the main brush and side brushes to remove tangled hair and debris. The ZeroTangle 2.0 design minimizes tangles, but periodic checks are recommended.
- Sensers: Wipe all sensors (cliff sensors, anti-collision sensors, charging contacts) with a dry cloth to ensure proper function.
- Kuxxinetti tal-Mopp: Replace mop pads when they show signs of wear or are no longer effectively cleaned by the station.
4.3 OMNI Station Maintenance
- Tank tal-Ilma Maħmuġ Vojt: Regularly empty the dirty water tank and rinse it.
- Imla t-Tank tal-Ilma Nadif: Ensure the clean water tank is filled.
- Kompartiment tad-Deterġenti: Check and refill the detergent compartment as needed. A single refill can last up to 90 days.
- Borża tat-Trab: Replace the dust bag in the auto-empty station when full.
5 Issolvi l-problemi
If you encounter issues with your DEEBOT, refer to the following common solutions. For more detailed troubleshooting, consult the ECOVACS HOME app or the official ECOVACS support websit.
- Ir-robot mhux qed jiċċarġja: Ensure the robot is correctly docked on the OMNI Station and the charging contacts are clean. Check if the power cable is securely connected to the station and the wall outlet.
- Robot stuck or unable to navigate: Clear any obstacles from the robot's path. Clean the driving wheels and sensors. Ensure the mapping process was completed successfully. The ultra-slim 81mm design helps it clean under low furniture, but very tight spaces may still pose a challenge.
- Prestazzjoni fqira tat-tindif: Check if the dustbin is full, the filter is clogged, or the brushes are tangled. Ensure mop pads are clean and properly attached. Verify water tanks are filled and detergent is present.
- OMNI Station issues (e.g., water leakage): Ensure all tanks are correctly seated and sealed. Check for any blockages in the water lines or drainage system.
- Problemi ta' konnettività tal-app: Ensure your Wi-Fi network is stable and the robot is within range. Restart the robot and your router. Re-pair the device if necessary.
Figura 5.1: The 81mm ultra-slim body allows cleaning in hard-to-reach areas.
6. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | ECOVACS |
| Isem tal-Mudell | DEEBOT T50 PRO OMNI Gen2 |
| Kulur | Iswed |
| Dimensjonijiet tal-Prodott | 35 x 47.7 x 53.3 ċm |
| Piż tal-oġġett | 15.8 Kilogrammi |
| Voltage | 220 Volts |
| Karatteristiċi Speċjali | Edge Cleaning, Self-cleaning Brush Roll, Cordless, AIVI 3D 3.0, TruEdge 2.0, ZeroTangle 2.0, OMNI Station, YIKO Voice Assistant |
| Uċuħ Rakkomandati | Multi-wiċċ |
| Qawwa tal-ġbid | 21,000 Pa |
7. Garanzija u Appoġġ
7.1 Informazzjoni dwar Garanzija
For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official ECOVACS websit. It-termini u l-kundizzjonijiet tal-garanzija jistgħu jvarjaw skont ir-reġjun.
7.2 Appoġġ għall-Klijent
If you require further assistance or have questions not covered in this manual, please contact ECOVACS customer support through the ECOVACS HOME app or their official websit. Tista' wkoll iżżur il- Ħanut ECOVACS fuq Amazon għal riżorsi addizzjonali.
