Manwal tal-Istruzzjonijiet tad-Dasqua 220° Digital Angle Finder Protractor

1. Introduzzjoni

This manual provides detailed instructions for the safe and effective use of your Dasqua 220° Digital Angle Finder Protractor. Please read this manual thoroughly before operating the device and retain it for future reference. This tool is designed for precise angle measurement in various applications, including woodworking, metalworking, and construction.

2. Prodott Aktarview

The Dasqua Digital Angle Finder Protractor is a versatile measuring instrument featuring a 425mm sliding leg, dual bubble levels, and a backlit LCD for clear readings. It is built for durability and accuracy in demanding environments.

2.1 Karatteristiċi ewlenin

Precise Angle Measurement: Measures angles up to 220° with an accuracy of ±0.2°.
MTR/COM Modes: Dedicated modes for calculating double miter angles and compound errors.
425mm Sliding Leg: Facilitates measurements in tight spaces and offers smooth adjustments.
Mekkaniżmu tal-qfil: Ensures angles are securely held for transfer.
Livelli b'żewġ bżieżaq: For horizontal and vertical leveling, providing 1.5mm/m accuracy.
LCD retroilluminat: 0.1° resolution display for clear visibility in various lighting conditions.
Kostruzzjoni Durabbli: IP54 waterproof housing, resistant to dust, water, and oil.

2.2 Komponenti

Diagram showing the components of the Dasqua Digital Angle Finder Protractor, including aluminum material, horizontal bubble, extension plate, vertical bubble, backlit LCD display, and lock knob. — Figure 1: Product Components. This diagram illustrates the main parts of the angle finder, including the aluminum body, horizontal and vertical bubble levels, the extendable leg, the backlit LCD screen, and the locking knob.

Korp Prinċipali: Houses the digital display and primary measuring arm.
Sliding Leg (Extension Plate): Extends from the main body for measuring larger angles or reaching into confined spaces.
Lock Knob: Secures the sliding leg at a desired angle.
Display LCD: Shows digital angle readings and mode indicators.
Buttuni tal-Kontroll: (On-Off, Hold, 180°, MTR, COM) for various functions.
Livelli tal-bużżieqa: One horizontal and one vertical for traditional leveling.

3. Setup

3.1 Installazzjoni tal-batterija

The device requires 2 x 1.5V LR6 (AA) batteries for the digital display. To install:

Locate the battery compartment cover, typically on the side or back of the main body.
Iftaħ il-qoxra.
Daħħal żewġ batteriji AA, waqt li tiżgura l-polarità korretta (+/-).
Agħlaq l-għatu tal-kompartiment tal-batterija sew.

The bubble levels operate mechanically and do not require batteries.

3.2 Qawwa Inizjali

Agħfas il- On-Off button to power on the device. The backlit LCD will illuminate, displaying "0.0" or the current angle.

4. Istruzzjonijiet Operattivi

Close-up of the Dasqua Digital Angle Finder's control panel, showing buttons for MTR, COM, Hold, 180 degrees, and On-Off/Zero Setting, along with the backlit LCD display. — Figure 2: Control Buttons. This image highlights the functions of each button on the device: MTR (Simple Miter Mode), COM (Compound Bevel Cutting Mode), Hold (Data Hold), 180° (Supplementary Angle Display), and the On-Off/Zero Setting Key.

4.1 Basic Angle Measurement

Ixgħel l-apparat.
Place the main body and the sliding leg against the surfaces whose angle you wish to measure.
Adjust the sliding leg until it aligns perfectly with the second surface.
Read the angle directly from the backlit LCD display.
Use the lock knob to secure the angle for transfer if needed.

4.2 MTR (Simple Miter) Mode

Agħfas il- MTR button to enter Simple Miter Mode. This mode is useful for calculating the miter angle required for a joint. The display will show the miter angle (half of the measured angle) needed for a perfect joint.

4.3 COM (Compound Bevel Cutting) Mode

Agħfas il- COM button to enter Compound Bevel Cutting Mode. This mode assists in calculating compound angles for complex cuts, such as crown molding or roof rafters. Refer to specific project requirements for interpreting the displayed values in this mode.

4.4 Funzjoni ta' Żomm

Agħfas il- Żomm button to freeze the current angle reading on the LCD. This is useful when measuring in awkward positions where reading the display directly is difficult. Press Żomm again to release the reading.

4.5 180° Supplementary Angle Display

Agħfas il- 180° button to display the supplementary angle (180° minus the measured angle). This is useful for certain applications where the inverse angle is required.

4.6 Issettjar taż-Żero

To set the current position as the zero reference, fully close the angle finder and press the On-Off button briefly. The display will reset to "0.0". This allows for relative angle measurements.

4.7 Using the Bubble Levels

A person using the Dasqua Digital Angle Finder Protractor to check a horizontal surface, showing the horizontal bubble level and the digital display. — Figure 3: Horizontal Leveling. The image demonstrates using the horizontal bubble level to ensure a surface is perfectly flat. Note that the digital display does not show a numerical value for the bubble level.

A person using the Dasqua Digital Angle Finder Protractor to check a vertical surface, showing the vertical bubble level and the digital display. — Figure 4: Vertical Leveling. This image shows the tool being used to verify a vertical alignment using its integrated vertical bubble level. The digital display provides angle readings, but not for the bubble level itself.

The angle finder includes two traditional bubble levels for quick horizontal and vertical leveling. These levels operate independently of the digital display and do not require batteries. Align the tool with the surface and observe the bubble to determine level or plumb.

5. Manutenzjoni

Tindif: Wipe the device with a soft, dry cloth after each use. For stubborn dirt, a slightly damp cloth can be used. Avoid abrasive cleaners or solvents.
Ħażna: Store the angle finder in its included storage bag in a dry, clean environment when not in use.
Sostituzzjoni tal-batterija: Replace batteries when the display becomes dim or unresponsive. Remove batteries if the device will not be used for an extended period to prevent leakage.
Klassifikazzjoni IP54: The device is IP54 rated, meaning it is protected from dust ingress and splashing water from any direction. While durable, avoid submerging the device in water.

6 Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
Id-displej huwa vojt jew mudlam.	Batteriji baxxi jew mejta; installazzjoni ħażina tal-batterija.	Ibdel il-batteriji b'batteriji AA ġodda, filwaqt li tiżgura l-polarità korretta.
Inaccurate angle readings.	Device not properly zeroed; obstruction; damaged sensor.	Perform zero-setting procedure. Ensure surfaces are clean and flat. If problem persists, contact support.
Sliding leg does not lock securely.	Lock knob not tightened sufficiently; debris in mechanism.	Ensure lock knob is fully tightened. Clean any debris from the sliding mechanism.

7. Speċifikazzjonijiet

Diagram illustrating the measuring range and dimensions of the Dasqua Digital Angle Finder Protractor, showing a 0-220 degree range, +/- 0.2 degree accuracy, and dimensions of 425mm x 58mm x 41mm. — Figure 5: Measuring Range and Dimensions. This graphic details the operational range of the angle finder (0-220 degrees), its accuracy (±0.2 degrees), and its physical dimensions (425mm length, 58mm width, 41mm height).

Medda ta' Kejl: 0-220°
Eżattezza: ± 0.2°
Riżoluzzjoni: 0.1°
Sliding Leg Length: 425mm
Bubble Level Accuracy: 1.5mm/m
Sors tal-Enerġija: 2 x 1.5V LR6 (AA) batteries (for digital display)
Materjal: Aluminju
Klassifikazzjoni tal-Protezzjoni: IP54 (Reżistenti għat-trab u l-ilma u t-titjir)
Piż tal-oġġett: 1.28 liri
Dimensjonijiet tal-pakkett: 17.87 x 9.17 x 1.77 pulzieri

8. Garanzija u Appoġġ

Dasqua products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Dasqua webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

Għal aktar għajnuna, tista' żżur il- Dasqua Store on Amazon.

	Istruzzjonijiet tal-Prodott tar-Riga tal-Angolu Diġitali Dasqua Istruzzjonijiet komprensivi għar-Riga Diġitali tal-Angolu Dasqua, li jkopru l-funzjonijiet, il-karatteristiċi, il-manutenzjoni, is-soluzzjoni tal-problemi, u l-modi ta' tħaddim bħal NORMAL, CROWN, u CUS.
	Manwal tal-Istruzzjonijiet tal-Kalibru Vernier/Dial Dasqua Manwal ta' struzzjonijiet għall-kalibri Dasqua Vernier u Dial, li jkopri l-istrutturi, il-qari tal-kejl, l-użu komuni, l-użu speċjali tal-kalibri, il-prekawzjonijiet, u s-soluzzjoni tal-problemi.
	Istruzzjonijiet tal-Prodott u Gwida għall-Użu tal-Kalibru Diġitali Dasqua IP67 Comprehensive product instructions for the Dasqua IP67 Digital Caliper. This guide covers performance guidelines, safety precautions, detailed specifications, usage instructions, battery replacement, troubleshooting, and proper disposal methods for accurate and safe operation.
	Mikrometru Diġitali ta' Barra Dasqua IP65 li ma jgħaddix ilma minnu: Istruzzjonijiet tal-Prodott Istruzzjonijiet komprensivi tal-prodott għall-Mikrometru Diġitali ta' Barra li ma jgħaddix ilma minnu Dasqua IP65, li jkopru l-użu, l-istruttura, il-buttuni, il-batterija, is-soluzzjoni tal-problemi, u l-prekawzjonijiet.
	Mikrometru Diġitali ta' Barra Dasqua: Istruzzjonijiet u Speċifikazzjonijiet tal-Prodott Istruzzjonijiet u speċifikazzjonijiet dettaljati tal-prodott għall-Mikrometru Diġitali ta' Barra Dasqua, li jkopru l-istruttura, iċ-ċwievet, id-displej LCD, it-tħaddim, ir-rekwiżiti tal-enerġija, il-prekawzjonijiet ta' sigurtà, u gwida għas-soluzzjoni tal-problemi.
	Kalibru Diġitali ta' Preċiżjoni Dasqua: Manwal tal-Utent u Istruzzjonijiet Gwida komprensiva għall-kalibri diġitali Dasqua, li tkopri l-użu, is-sigurtà, l-ispeċifikazzjonijiet, is-soluzzjoni tal-problemi, u s-sostituzzjoni tal-batterija. Tgħallem kif tħaddem u żżomm il-kalibru diġitali Dasqua tiegħek għal kejl preċiż.

Dasqua Digital Angel Finder Procractor