Prodott Overview
The ALLmeter DTI Digital Dial Indicator is a precision measuring tool designed for accurate dimensional measurements in various mechanical and industrial applications. It features a large LCD display for easy readability, switchable metric and imperial units, and a zero-setting function for versatile use.
Figura 1: Quddiem view of the ALLmeter DTI Digital Dial Indicator, showing the LCD display and control buttons.
Figure 2: Detailed diagram illustrating the key components and dimensions of the digital dial indicator, including the LCD display, on/off switch, inch/mm switch, zero-setting button, holding point for clamp, spring-loaded probe, and screw thread type M2.5.
X'inhu Inkluż
Malli tiftaħ il-pakkett, ivverifika li l-komponenti kollha huma preżenti:
- Digital Dial Indicator unit
- Rear Cover (for mounting)
- 1.5V Battery (LR44 type)
- Manwal ta 'Istruzzjoni (dan id-dokument)
Figure 3: Image showing the complete contents of the product package, including the digital dial indicator, rear cover, battery, and instruction manual.
Setup
1. Installazzjoni tal-batterija
The digital dial indicator requires one LR44 1.5V button cell battery. The battery compartment is located on the side of the unit.
- Sib l-għatu tal-kompartiment tal-batterija.
- Żerżaq jew neħħi l-għatu bil-mod biex tiftaħ il-kompartiment.
- Daħħal il-batterija LR44 bin-naħa pożittiva (+) tħares 'il fuq.
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
Figura 4: Close-up view of the digital dial indicator, highlighting the convenient LR44 battery compartment for easy replacement and the zero button.
2. Attaching Rear Cover
The digital dial indicator comes with a detachable rear cover, allowing it to be used with different magnetic base holder stands or other mounting solutions. The standard rear cover can be replaced with the included metal back with a mounting lug for increased versatility.
- If a different rear cover is desired, use a small screwdriver to remove the screws securing the current rear cover.
- Carefully remove the existing cover.
- Align the desired rear cover (e.g., the metal one with mounting lug) with the screw holes.
- Secure the new cover by tightening the screws.
Video 1: Demonstration of how to detach and attach the rear cover of the digital dial indicator, showcasing its adaptability for various magnetic base holder stands.
Istruzzjonijiet Operattivi
1. Power On/Off
Agħfas il- OFF/ON buttuna biex tixgħel jew titfi l-apparat.
2. Unit Conversion (mm/inch)
Agħfas il- pulzier / mm button to switch between metric (millimeters) and imperial (inches) units. The selected unit will be displayed on the LCD screen.
Figure 5: Comparison of the digital dial indicator display showing measurements in both millimeters (mm) and inches (in), demonstrating the unit conversion feature.
3. Zero Setting
To set the current position as zero, press the ŻERO button. This allows for relative measurements from any desired reference point.
4. Teħid tal-Kejl
Extend or retract the spring-loaded probe to make contact with the surface to be measured. The measurement will be displayed instantly on the LCD screen.
Video 2: Operational demonstration of the electronic digital dial indicator, including switching between mm/inch units, performing zero setting, and taking measurements on a surface.
5. Għeluq Awtomatiku
The device features an automatic shutdown function to conserve battery life. If there is no operation for approximately 5 minutes, the indicator will automatically turn off.
Figure 6: Illustration of the automatic shutdown feature, indicating that the device powers off after 5 minutes of inactivity to save battery.
Manutenzjoni
1. Tindif
To ensure accurate readings and prolong the life of your digital dial indicator, keep it clean. Wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the display or housing.
2. Ħażna
When not in use, store the digital dial indicator in its protective case to prevent dust and damage. Store in a dry environment away from direct sunlight and extreme temperatures.
Figure 7: The digital dial indicator shown with its protective storage case and included batteries, emphasizing proper storage for protection and longevity.
3. Sostituzzjoni tal-batterija
If the display starts flashing consistently, it indicates a low battery. Replace the LR44 battery as described in the "Battery Installation" section to ensure continued accurate operation.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-displej huwa vojt jew mudlam. | Il-batterija hija mejta jew installata ħażin. | Check battery orientation. Replace battery if necessary. |
| Display is flashing. | Indikatur tal-batterija baxxa. | Ibdel il-batterija LR44. |
| Qari mhux preċiż. | Dirt or debris on the probe or measuring surface; damaged probe; unit not properly zeroed. | Clean the probe and measuring surface. Re-zero the device. If problem persists, contact support. |
| L-unità ma tixgħel. | Battery issue; internal malfunction. | Ensure battery is new and correctly installed. If still unresponsive, contact support. |
Speċifikazzjonijiet
Figura 8: Aktarview of the digital dial indicator's key specifications, including measuring range, resolution, and operating conditions.
- Medda ta' Kejl: 0-25.4mm (0-1 pulzier)
- Riżoluzzjoni: 0.01mm (0.0005 pulzieri)
- Ħin ta' Rispons: ≤ 0.5 m/s
- Temperatura operattiva: 0 ~ 40 ° C (32 ~ 104 ° F)
- Temperatura tal-Ħażna: -20 ~ 70 ° C (-4 ~ 158 ° F)
- Umdità Relattiva: ≤ 80% R.H
- Materjal: Aluminum Alloy frame
- Dimensjonijiet tal-Prodott: 7.09 x 3.35 x 2.36 pulzieri
- Piż: Madwar 129g (4.55 uqija)
- Tip ta 'batterija: 1 x LR44 1.5V button cell (included)
- Tfigħ Awtomatiku: Wara 5-il minuta ta' inattività
Garanzija u Appoġġ
ALLmeter products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact ALLmeter customer service through the retailer where the product was purchased or visit the official ALLmeter websit.
Għal aktar informazzjoni u aġġornamenti tal-prodott, żur il- ALLmeter Store on Amazon.
