Prodott Overview
The Miaowoof Clear Ice Ball Maker is engineered to produce perfectly transparent, spherical ice, enhancing the aesthetic and taste of your beverages. Its innovative design utilizes stainless steel vacuum insulation to replicate natural freezing, effectively expelling air bubbles and impurities to create crystal-clear ice that melts slowly, preserving the integrity of your drink.
Image: The Miaowoof Clear Ice Ball Maker set, showing the stainless steel cups, silicone molds, and perfectly round clear ice balls in a storage container, alongside a glass of whiskey.
Kontenut tal-Pakkett
Your Miaowoof Clear Ice Ball Maker package includes the following items:
- 2 x 6.5cm Stainless Steel Clear Ice Ball Molds
- 1 x Manwal ta 'Istruzzjoni
- 1 x Storage Box (holds 6-12 ice balls)
- 1 x Ice Tongs
Image: The complete package contents, featuring the two ice maker units in their retail boxes, the user manual, and a pair of ice tongs.
Twaqqif u l-Ewwel Użu
- Naddaf il-Komponenti: Before first use, wash all parts of the ice maker (stainless steel cups, silicone molds, and storage box) with warm soapy water. Rinse thoroughly and dry.
- Assemble the Mold: Place the silicone mold securely into the stainless steel cup. Ensure it fits snugly.
- Imla bl-Ilma: Fill the stainless steel cup with purified or distilled water up to the indicated "MIN" line. Using purified water helps achieve clearer ice.
Image: A detailed diagram illustrating the components of the ice maker, including the silicone mold and stainless steel cup, with measurements and the recommended water fill line.
- Poġġi fil-friża: Place the assembled ice maker upright in your freezer. Ensure it is level to prevent water spillage and ensure even freezing.
Istruzzjonijiet Operattivi
- Ħin tal-iffriżar: Allow the ice maker to freeze for approximately 20-24 hours. The exact time may vary depending on your freezer's temperature. For optimal clarity, ensure the ice is fully frozen.
- Removing the Ice Ball: Once frozen, remove the ice maker from the freezer. The unique Y-shaped design of the silicone mold allows the mold to automatically lift by 4mm upon completion of freezing, making removal easier. If the ice is stuck, run warm water over the exterior of the stainless steel cup for a few seconds to loosen it.
- Separate Ice Ball: Gently separate the silicone mold from the stainless steel cup. Then, carefully peel the silicone mold away from the clear ice ball.
- Discard Impurity Ice: A thin layer of cloudy ice (approximately 2cm) containing impurities will form at the bottom of the stainless steel cup. Discard this impurity ice by running it under warm water for a few seconds. This allows for quick preparation for the next freezing cycle.
- Servi: Use the provided ice tongs to place the clear ice ball into your desired drink.
Image: Two individuals holding glasses with clear round ice balls, demonstrating the product's use in beverages.
Image: A close-up of a hand using ice tongs to carefully place a perfectly clear, round ice ball into a glass, ready for serving.
Manutenzjoni u Kura
- Tindif: After each use, wash the stainless steel cup and silicone mold with warm water and mild dish soap. Rinse thoroughly. The product is dishwasher safe.
- Tnixxif: Ensure all components are completely dry before storing to prevent water spots or odors.
- Ħażna: Store the ice maker in a clean, dry place. Its compact design allows it to be placed upright in refrigerator doors or narrow gaps in the freezer.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ice is cloudy or has bubbles. | Tap water contains impurities or air. | Use purified or distilled water for best results. Ensure the water level is at the MIN line. |
| Ice ball is difficult to remove. | Ice is over-frozen or mold is stuck. | Ensure the ice is fully frozen (20-24 hours). Run warm water over the exterior of the stainless steel cup for a few seconds to loosen. Do not force removal. |
| Is-silġ idub malajr wisq. | Ice ball not fully frozen or external temperature is high. | Ensure the ice is completely frozen. The clear ice melts slower than regular ice due to its density. |
| Impurity ice layer is too thick. | Water level too high or excessive impurities. | Ensure water is filled only to the MIN line. Use purified water. |
| Product does not fit in freezer. | Limited freezer space. | The compact design allows it to be placed upright in refrigerator doors or narrow gaps in the freezer. |
Speċifikazzjonijiet
- Numru tal-Mudell: CICT-0002
- Ditta: Miaowoof
- Materjal: Stainless Steel (304 Stainless Steel for vacuum cup) and Silicone
- Kulur: Abjad
- Ice Ball Diameter: 6.4ċm
- Dimensjonijiet tal-pakkett: 26.3 x 17 x 10.6 ċm
- Piż tal-oġġett: 0.85 kg
- Istruzzjonijiet għall-Kura: Safe għall-ħasil tal-platti
Image: An internal diagram of the stainless steel cup, highlighting the 304 stainless steel material and the vacuum insulation layer that aids in creating clear ice by expelling air bubbles.
Garanzija u Appoġġ
For warranty information or product support, please refer to the contact details provided with your purchase or visit the official Miaowoof store on Amazon.
Miaowoof Store: Visit Miaowoof Store
Vidjows Uffiċjali tal-Prodott
Bħalissa m'hemm l-ebda vidjows uffiċjali tal-prodott mill-bejjiegħ disponibbli.
