Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your BitFenix CETO Basic High Airflow PC Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.
The BitFenix CETO Basic is designed for high airflow and features panoramic tempered glass, three pre-installed Infinity Mirroring ARGB fans (two reverse, one positive), and extensive compatibility for modern PC components.
Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti qabel ma tipproċedi bl-installazzjoni:
- BitFenix CETO Basic PC Gaming Case
- 3 x 120mm Infinity Mirroring ARGB Fans (2x Reverse, 1x Positive)
- 1 x 8+8 Pin ARGB/Fan Controller
- Accessory Box (screws, zip ties, standoffs, etc.)
- Manwal għall-Utent (dan id-dokument)
Figura 1: Included components, showing the PC case, three 120mm ARGB fans, and the 8+8 pin controller for fan and lighting management.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | BitFenix CETO Basic High Airflow PC Gaming Case White |
| Numru tal-Mudell | BFC-CET-200-WWGSW-3A |
| Tip ta' Każ | Nofs it-Torri |
| Appoġġ tal-Motherboard | ATX, Mikro-ATX, Mini-ITX |
| Fannijiet installati minn qabel | 3 x 120mm Infinity Mirroring ARGB (2x Reverse, 1x Positive) |
| Appoġġ tar-Radjatur (Fuq) | 360mm / 280mm / 240mm (thickness up to 27mm) |
| Appoġġ tar-Radjatur (Wara) | 120mm |
| Approvazzjoni tal-GPU | Sa 390mm |
| Għoli tal-CPU Cooler | Sa 165mm |
| Tul PSU | Up to 200mm (Bottom Mount) |
| Drive Bays | 3.5" Drive Bay: 2+1, 2.5" Drive Bay: 2+1 |
| Spazju għall-Ġestjoni tal-Cable | 20mm |
| Panel I/O | 1 x Type-C, 2 x USB 3.0, LED/Reset Button, Power Button |
| Filtri tat-Trab | Magnetic (Top, Bottom, Right Steel Panel) |
| Dimensjonijiet (L x W x H) | 424mm x 215mm x 486mm |
| Piż | 6 kg |
Figura 2: External dimensions and internal component layout overview.
Figura 3: Detailed internal clearances for CPU coolers, graphics cards, and cable management.
Setup u Installazzjoni
1. Tħejjija tal-Każ
Carefully remove the case from its packaging. Place it on a stable, flat surface. The tempered glass side panel can be removed for easier access during component installation. The case features snap-on panels for tool-free removal.
Figura 4: Removing the side panel. Always handle tempered glass with care, using both hands.
2. Installazzjoni tal-Motherboard
Install the necessary standoffs for your motherboard form factor (ATX, Micro-ATX, or Mini-ITX). Carefully place your motherboard into the case, aligning it with the standoffs and I/O shield opening. Secure the motherboard with screws.
3. Installazzjoni tal-Unità tal-Provvista tal-Enerġija (PSU)
The BitFenix CETO Basic supports ATX power supplies up to 200mm in length, mounted at the bottom of the case. Slide the PSU into its designated bay and secure it with screws from the rear of the case.
4. Installazzjoni ta' Apparat tal-Ħażna
The case supports 2+1 3.5" drive bays and 2+1 2.5" drive bays. Install your HDDs and SSDs into the appropriate trays or mounting points and secure them.
Figura 5: Storage drive bay locations and PSU mounting area.
5. Installazzjoni tal-Karta tal-Grafika (GPU)
The case accommodates GPUs up to 390mm in length. Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with the retention mechanism or screws.
6. Installazzjoni tas-Sistema tat-Tkessiħ (Fannijiet u Radjaturi)
The case comes with three 120mm Infinity Mirroring ARGB fans pre-installed for enhanced airflow. The top panel supports radiators up to 360mm/280mm/240mm (max thickness 27mm), and the rear supports a 120mm radiator.
Figura 6: Radiator and fan mounting options within the case.
7. Ġestjoni tal-Kejbil
Utilize the 20mm cable management space behind the motherboard tray to route and secure cables. This improves airflow and aesthetics. Connect all necessary power cables from the PSU to your components and the front panel I/O cables to your motherboard.
The pre-installed ARGB fans connect to the included 8+8 Pin controller. Connect this controller to your power supply via SATA and to your motherboard's ARGB header (if available) for software control, or use the case's LED/Reset button for manual control.
Operating the Case Features
Front I/O Panel
Il-pannell tal-I/O ta' quddiem jipprovdi aċċess konvenjenti għall-portijiet u l-kontrolli essenzjali:
- 1 x Type-C Port: For modern USB-C devices.
- 2 Portijiet USB 3.0: Għal apparati USB b'veloċità għolja.
- LED/Reset Button: Controls ARGB lighting modes or functions as a system reset button depending on motherboard connection.
- Buttuna tal-Qawwa: Biex tixgħel/titfi s-sistema tiegħek.
Figura 7: Front I/O panel layout and dust filter locations.
Kontroll tad-Dawl ARGB
The pre-installed Infinity Mirroring ARGB fans offer striking visual effects. Control their lighting via the included 8+8 Pin controller. If your motherboard supports ARGB synchronization (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, Biostar RGB Sync), connect the controller to the motherboard's 3-pin ARGB header to manage lighting through software. Otherwise, use the case's LED/Reset button to cycle through pre-set lighting modes.
Figura 8: The BitFenix CETO Basic case with its illuminated ARGB fans, highlighting the aesthetic design.
Figura 9: Airflow optimization within the case, demonstrating the path of cool air intake and hot air exhaust for efficient cooling.
Manutenzjoni
Tindif tal-Filtru tat-Trab
The BitFenix CETO Basic case is equipped with magnetic dust filters on the top, bottom, and right steel panel. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside your system.
- Gently remove the magnetic dust filters from their respective locations.
- Clean the filters using compressed air, a soft brush, or by rinsing with water (ensure they are completely dry before reattaching).
- Reattach the magnetic filters to the case.
Figura 10: Locations of removable magnetic dust filters for easy maintenance.
Tindif Ġenerali
Imsaħ il-barra tal-kaxxa b'ċarruta ratba u damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish or tempered glass.
Issolvi l-problemi
System Not Powering On
- Kun żgur li l-provvista tal-enerġija hija konnessa sew mas-sokit tal-ħajt u li s-swiċċ tal-PSU huwa fil-pożizzjoni 'ON'.
- Ivverifika li l-kejbil tal-enerġija ATX ta' 24-pin u l-kejbil tal-enerġija tas-CPU huma konnessi sew mal-motherboard.
- Iċċekkja li l-kejbil tas-swiċċ tal-enerġija tal-pannell ta' quddiem huwa konness sew mal-header tal-pannell ta' quddiem tal-motherboard. Irreferi għall-manwal tal-motherboard tiegħek għall-pinout korrett.
Fans Not Spinning or ARGB Not Lighting Up
- Ensure the 8+8 Pin ARGB/Fan controller is receiving power via its SATA power connector from the PSU.
- Verify that the fans are correctly connected to the controller.
- If using motherboard software control, ensure the controller's ARGB cable is connected to the motherboard's 3-pin ARGB header and the software is installed and configured correctly.
- If using the case's LED/Reset button for control, ensure the button's cable is connected to the controller.
Poor Airflow or High Temperatures
- Clean the magnetic dust filters regularly as described in the Maintenance section.
- Ensure all fans are spinning in the correct direction for optimal airflow (intake from front/bottom, exhaust from top/rear). The BitFenix CETO Basic includes both positive and reverse fans for optimized airflow.
- Check for proper cable management to avoid obstructing airflow paths.
- Verify that CPU cooler and GPU fans are functioning correctly.
Garanzija u Appoġġ
For warranty information and technical support, please refer to the official BitFenix webis-sit jew ikkuntattja lill-bejjiegħ lokali tiegħek. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Manifattur: BITFENIX
Mudell: BFC-CET-200-WWGSW-3A
Websit: www.bitfenix.com
