CREWORKS 600W Metal Lathe 210x350 MM Instruction Manual

1. Introduzzjoni

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 600W Metal Lathe 210x350 MM. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage. Keep this manual for future reference.

Image 1.1: The CREWORKS 210x350 mm Metal Lathe, suitable for metalworking, drilling, internal and external threading, polishing, gyroscope processing, woodworking, screw turning, and groove turning.

2. Istruzzjonijiet tas-Sigurtà

Always prioritize safety when operating machinery. Failure to follow these instructions may result in serious injury or death.

• Aqra l-Manwal Sħiħ: Ifhem l-istruzzjonijiet u t-twissijiet kollha qabel l-użu.
• Ilbes Tagħmir Protettiv Personali (PPE): Always wear safety glasses or a face shield, hearing protection, and appropriate clothing. Avoid loose clothing, jewelry, and long hair that can get caught in moving parts.
• Ensure a Safe Work Environment: Keep the work area clean, well-lit, and free from clutter. Do not operate the lathe in damp jew kundizzjonijiet imxarrba.
• Assigura l-Biċċa tax-Xogħol: Dejjem kun żgur li l-biċċa tax-xogħol tkun imqabbda sewamped in the chuck or collet before starting the lathe.
• Never Leave Running Machine Unattended: Always turn off the machine and wait for all moving parts to stop before leaving the work area.
• Disconnect Power Before Adjustments: Always unplug the machine from the power source before making any adjustments, changing tools, or performing maintenance.
• Uża l-Għodda Korretta: Only use accessories and tools designed for this lathe.
• Maintain Machine: Keep the machine in good working order. Inspect for damaged parts before each use.
• Waqfien ta' Emerġenza: Iffamiljarizza ruħek mal-post u l-funzjoni tal-buttuna ta' waqfien ta' emerġenza.

3. Kontenut tal-Pakkett

Verify that all items listed below are included in your package. If any parts are missing or damaged, contact customer service immediately.

• 1 x Mini Lathe
• 3 x Chuck Jaws
• 1 x Tailstock
• 2 x Spanelli
• 1 x Botta taż-Żejt
• 9 x Metal Gears
• 5 x Allen Keys
• 1 x Chuck Key
• 5 x Turning Tools
• 2 x Tornaviti
• 1 x Manwal ta 'Istruzzjoni

Image 3.1: The CREWORKS Metal Lathe along with its comprehensive set of accessories and tools, including chuck jaws, wrenches, oil can, metal gears, Allen keys, chuck key, turning tools, and screwdrivers.

4. Prodott Aktarview

Familiarize yourself with the main components of your CREWORKS Metal Lathe:

Image 4.1: The lathe features a digital display for real-time speed monitoring and a variable speed control knob, allowing adjustments from 0 to 2250 RPM.

Image 4.2: Key control elements include the emergency stop button, carriage handwheel, cross slide handwheel, compound control wheel, and tailstock advance handwheel, all designed for precise control and safety.

• Headstock: Contains the main spindle, chuck, and speed control mechanisms.
• Chuck: A 3-jaw chuck for holding workpieces.
• Post tal-Għodda: Iżomm l-għodod tat-tqattigħ.
• Ġarr: Moves the tool post along the bed.
• Slajd Inkroċjat: Moves the tool post perpendicular to the bed.
• Tailstock: Supports the end of long workpieces or holds drilling/reaming tools.
• Sodda: The main frame of the lathe, providing stability and guiding the carriage and tailstock.
• Invita taċ-ċomb: Used for automatic feeding and threading operations.
• Wirja Diġitali: Shows the current spindle speed.
• Buttuna ta' Waqfien ta' Emerġenza: Iwaqqaf immedjatament l-operazzjonijiet kollha tal-magna.

5. Setup

5.1 Spakkjar u Spezzjoni

Carefully remove the lathe and all components from the packaging. Inspect for any shipping damage. Clean any protective grease or oil from the machine surfaces using a suitable degreaser.

5.2 Tqegħid u Immuntar

Place the lathe on a sturdy, level workbench capable of supporting its weight (approximately 37 kg). Secure the lathe to the workbench using appropriate bolts and fasteners to prevent movement during operation.

5.3 Konnessjoni Elettrika

Connect the lathe to a grounded 220V AC power outlet. Ensure the power supply matches the machine's requirements (600W motor). Do not use extension cords unless absolutely necessary, and ensure they are rated for the machine's power draw.

5.4 Installazzjoni u Aġġustament taċ-Ċokk

The 3-jaw chuck is typically pre-installed. Ensure it is securely fastened. The chuck is designed to hold both square and round workpieces. Refer to the chuck jaw diagram for proper workpiece clamping.

Immaġni 5.1: Close-up view of the 3-jaw chuck, which can be adapted for various workpiece sizes and shapes. The chuck has a clampfirxa ta' 100 mm.

5.5 Gear Setup for Threading

The lathe comes with a set of metal gears for various threading operations. Consult the gear chart on the machine or in the manual for the correct gear combination for desired metric or imperial thread pitches. Ensure gears are properly meshed and secured.

Image 5.2: The robust metal gear set ensures strong and efficient power transmission, crucial for precise threading and turning operations.

6. Istruzzjonijiet Operattivi

6.1 Power On/Off

To power on the lathe, ensure the emergency stop button is disengaged (pulled out). Turn the main power switch to the 'ON' position. To turn off, press the emergency stop button or turn the main power switch to 'OFF'.

6.2 Spindle Speed Control

The lathe features variable speed control. Use the speed control knob to adjust the spindle RPM from 0 to 2250. The current speed will be displayed on the LCD. Always adjust speed gradually and select an appropriate speed for the material and operation.

6.3 Loading Workpieces

Open the chuck jaws using the chuck key. Insert the workpiece and tighten the jaws firmly and evenly. Ensure the workpiece is centered and runs true before starting the lathe. For longer workpieces, use the tailstock for additional support.

6.4 Tool Post and Tailstock Adjustment

Mount the appropriate cutting tool in the tool post. Adjust the tool height to be on the center line of the workpiece. Use the carriage and cross slide handwheels to position the tool. The tailstock can be adjusted along the bed and its quill extended or retracted to support work or hold drilling tools.

Image 6.1: The tool post, designed to securely hold various cutting tools for turning, facing, and other operations.

Image 6.2: The tailstock, used for supporting long workpieces or holding drilling and reaming tools.

6.5 Basic Operations (Turning, Drilling, Threading)

This lathe is capable of various operations including turning, drilling, threading, and polishing. Always ensure the workpiece is secure, the correct tool is selected, and the appropriate speed is set for the material being worked on. For threading, refer to the gear chart and ensure the lead screw is engaged correctly.

7. Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tat-torn tiegħek.

• Tindif: After each use, clean chips and debris from the lathe bed, carriage, and other surfaces. Use a brush or air hose. Never use bare hands to remove chips.
• Lubrikazzjoni: Regularly lubricate all moving parts, including the lead screw, carriage ways, and gears, with appropriate machine oil. Refer to the lubrication points indicated in the full manual.
• V-Guide Rails: The V-guide rails ensure smooth and precise movement. Keep them clean and lightly oiled. Periodically check for wear and adjust if necessary to maintain accuracy.
• Tensjoni taċ-ċinturin: Check the drive belt tension periodically and adjust if it feels loose.
• Spezzjoni Elettrika: Periodically inspect the power cord and electrical connections for any signs of damage.

Image 7.1: The V-guide rails and lead screw, critical components that require regular cleaning and lubrication for smooth and precise operation.

8 Issolvi l-problemi

Din it-taqsima tindirizza kwistjonijiet komuni li tista’ tiltaqa’ magħhom. Għal problemi mhux elenkati hawn, ikkuntattja l-appoġġ għall-klijenti.

9. Speċifikazzjonijiet

Detailed technical specifications for the CREWORKS 600W Metal Lathe 210x350 MM:

Image 9.1: A visual representation of the lathe's dimensions and a summary of its technical specifications.

10. Garanzija u Appoġġ

For warranty information, technical support, or replacement parts, please contact CREWORKS customer service. Keep your purchase receipt and model number (MLM-N814) handy when contacting support.