Powerology Portable Air Compressor Jump Starter User Manual

1. Introduzzjoni

Thank you for choosing the Powerology Portable Air Compressor Jump Starter. This multi-functional device is designed to provide reliable assistance in various emergency situations, including jump-starting vehicles and inflating tires. Please read this manual thoroughly before use to ensure safe and optimal performance.

Figure 1.1: The Powerology Portable Air Compressor Jump Starter, showcasing its main unit, jump starter cables (red and black clamps), and the air inflation hose. The digital display is visible on the unit.

2. Informazzjoni dwar is-Sigurtà

Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-apparat:

• Tesponix l-apparat għal temperaturi estremi, dawl tax-xemx dirett, jew umdità.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Kun żgur li jkun hemm ventilazzjoni xierqa waqt it-tħaddim u l-iċċarġjar.
• Tiżżarmax jew timmodifikax l-apparat. Irreferi kull manutenzjoni lil persunal kwalifikat.
• Uża biss l-aċċessorji u l-kejbils provduti.
• Avoid short-circuiting the jump starter clamps.

3. Prodott Aktarview

3.1 Komponenti

• Main Unit (Portable Air Compressor Jump Starter)
• Smart Jump Starter Cables
• Air Inflation Hose
• Cable tal-Iċċarġjar tal-USB-C
• Various Nozzle Adapters for inflation

3.2 Karatteristiċi ewlenin

• Kapaċità tal-batterija: 8800mAh
• L-ogħla kurrent: 800A (for jump starting)
• Max Inflation Pressure: 150 PSI
• Veloċità tal-inflazzjoni: 31.4 Litri/Minuta
• Kompatibbiltà tal-Magna: Up to 5.0L Gasoline, 3.0L Diesel
• Funzjoni tal-Bank tal-Enerġija: Dual USB Output, including 20W Power Delivery (PD) via USB-C
• Wiri: Digital LED screen for real-time pressure and battery status

Figura 3.1: Dettaljata view of the digital display on the Powerology unit, indicating battery charge, selectable pressure units (PSI, BAR, KPA, KG/CM²), and control buttons for mode selection and pressure adjustment.

4. Setup

4.1 Iċċarġjar inizjali

Before first use, fully charge the device. Connect the provided USB-C charging cable to the device's USB-C input port and the other end to a compatible USB power adapter (not included). The digital display will indicate the charging status. A full charge typically takes approximately 2 hours with a 20W PD charger.

Figure 4.1: The Powerology device connected via USB-C cable to a smartphone, demonstrating its power bank functionality. The phone screen shows a charging indicator.

5. Istruzzjonijiet Operattivi

5.1 Aqbeż Startjar ta' Vettura

1. Kun żgur li l-jump starter huwa ċċarġjat mill-inqas 50%.
2. Turn off the vehicle's ignition and all accessories.
3. Qabbad l-aħmar (+) clamp mat-terminal pożittiv (+) tal-batterija tal-vettura.
4. Qabbad l-iswed (-) clamp mat-terminal negattiv (-) tal-batterija tal-vettura.
5. Connect the smart cable connector to the jump starter port on the device.
6. Start the vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not attempt more than 3 consecutive starts.
7. Once the vehicle starts, disconnect the smart cable from the jump starter, then remove the black (-) clamp, segwit mill-marka ħamra (+)amp.

Figure 5.1: The Powerology device with its jump starter cables connected to a vehicle battery, illustrating the process of jump starting a car in an outdoor setting.

5.2 Inflating Tires

1. Connect the air inflation hose to the device's inflation port.
2. Waħħal it-tarf l-ieħor tal-pajp mal-valv tat-tajer.
3. Turn on the device. The digital display will show the current tire pressure.
4. Use the '+' and '-' buttons to set the desired pressure.
5. Press the start button to begin inflation. The device will automatically stop when the preset pressure is reached.
6. Disconnect the hose from the tire valve and the device.

Figure 5.2: The Powerology device positioned next to a car tire, with the inflation hose connected, demonstrating its use as an air compressor for tire inflation.

5.3 Użu bħala Power Bank

Connect your electronic devices (e.g., smartphones, tablets) to the USB-A or USB-C output ports on the Powerology unit using a compatible charging cable. The device will automatically begin charging your connected device.

6. Manutenzjoni

• Tindif: Imsaħ l-apparat b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
• Ħażna: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage and recharge every 3-6 months to maintain battery health.
• Kura tal-batterija: Evita li tiċċarġja l-batterija kompletament ta' spiss biex ittawwal il-ħajja tagħha.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

This Powerology product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your product packaging or visit the official Powerology websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.