BraunAbility 406416KS Hydraulic Fluid for Wheelchair Lifts

1. Prodott Aktarview

The BraunAbility 406416KS Hydraulic Fluid is a high-quality lubricant specifically formulated for the hydraulic systems of Braun wheelchair lifts. This fluid is crucial for ensuring the smooth, efficient, and reliable operation of your lift, contributing to its optimal performance and extended service life.

Il-karatteristiċi ewlenin jinkludu:

• High-Quality Lubrication: Ensures smooth operation of hydraulic cylinders.
• Prestazzjoni ottimali: Maintains the efficiency and longevity of Braun lifts.
• Sostituzzjoni faċli: Simple to replace when the fluid becomes unclear.
• Kompatibilità Universali: Works with all Braun hydraulic lift models.

Figure 1: BraunAbility 406416KS Hydraulic Fluid bottle. This image displays a white plastic bottle of BraunAbility 406416KS Hydraulic Fluid, clearly labeled for use with Braun Wheelchair Lifts. The label also provides manufacturer contact information and webdettalji tas-sit.

2. Informazzjoni Importanti dwar is-Sigurtà

Always prioritize safety when handling hydraulic fluid and performing maintenance on your wheelchair lift. Failure to follow safety precautions can result in injury or equipment damage.

• Read Manuals: Always consult your specific wheelchair lift's owner's manual for detailed instructions and safety warnings before performing any maintenance.
• Tagħmir Protettiv Personali (PPE): Wear appropriate PPE, including safety glasses and gloves, to prevent skin and eye contact with hydraulic fluid.
• Ventilazzjoni: Ensure adequate ventilation when working with hydraulic fluid.
• Fjammabilità: Hydraulic fluid may be flammable. Keep away from open flames, sparks, and heat sources.
• Rimi: Dispose of used hydraulic fluid according to local environmental regulations. Do not pour down drains or onto the ground.
• Assistenza Professjonali: If you are unsure about any procedure, contact a qualified service technician.

3. Setup u Preparazzjoni

Before adding or replacing hydraulic fluid, ensure the lift is in a safe, level position and powered off. Gather all necessary tools and materials.

1. Park the Lift: Position the wheelchair lift on a flat, stable surface.
2. Itfi: Turn off the power to the lift and disconnect the battery if instructed by your lift's manual.
3. Locate Reservoir: Identify the hydraulic fluid reservoir on your specific Braun wheelchair lift model. Refer to your lift's owner's manual for its exact location.
4. Żona Nadifa: Clean the area around the reservoir cap to prevent contaminants from entering the hydraulic system.

4. Fluid Replacement Procedure

Follow these general steps for replacing the hydraulic fluid. Always refer to your specific Braun lift's service manual for precise instructions and fluid capacity.

1. Ixxotta l-Fluwidu l-Qadim: Carefully open the drain plug (if applicable) or use a suction pump to remove the old hydraulic fluid from the reservoir. Collect the fluid in a suitable container for proper disposal.
2. Spezzjona s-Sistema: While the reservoir is empty, inspect for any signs of leaks or damage to hoses and connections. Address any issues before refilling.
3. Riżervwar tal-mili mill-ġdid: Slowly pour the BraunAbility 406416KS Hydraulic Fluid into the reservoir. Use a funnel to prevent spills.
4. Check Fluid Level: Fill to the "FULL" mark indicated on the reservoir or dipstick. Do not overfill.
5. Bleed System (if necessary): Some hydraulic systems may require bleeding to remove air. Consult your lift's manual for this procedure.
6. Għatu Sikur: Replace and securely tighten the reservoir cap.
7. Operazzjoni tat-Test: Restore power to the lift and perform several full cycles (up and down) to circulate the new fluid and check for proper operation and leaks.

5. Linji Gwida ta' Manutenzjoni

Regular inspection and timely replacement of hydraulic fluid are essential for the longevity and safe operation of your Braun wheelchair lift.

• Fluid Clarity: Periodically check the hydraulic fluid for clarity. The fluid should be clear and free of discoloration or particles.
• Skeda ta' Sostituzzjoni: Replace the hydraulic fluid whenever it becomes unclear, discolored, or at intervals recommended by your lift's manufacturer, typically every 1-2 years or as specified in your lift's manual.
• Livell tal-Fluwidu: Regularly check the fluid level and top off if necessary, using only BraunAbility 406416KS Hydraulic Fluid.
• Sejbien ta' tnixxija: Inspect the hydraulic system for any signs of leaks around hoses, fittings, and cylinders. Address leaks immediately.

6. Issolvi l-problemi ta' Kwistjonijiet Komuni

This section addresses common issues related to hydraulic fluid.

Note: For complex issues or if troubleshooting steps do not resolve the problem, contact BraunAbility customer support or a certified service technician.

7. Speċifikazzjonijiet tal-Prodott

8. Appoġġ u Informazzjoni ta 'Kuntatt

For further assistance, technical support, or inquiries regarding BraunAbility products, please use the following contact information:

• Servizz tal-Klijent: 1-800-THE LIFT (1-800-843-5438)
• International Corporate Headquarters: P.O. Box 310, Winamac, IN 46996 USA
• Websit: www.braunmobility.com