GOOLOO GP3000 Jump Starter and AP150 PRO Tire Inflator User Manual

1. Introduzzjoni

This manual provides essential information for the safe and effective operation of your GOOLOO GP3000 Jump Starter and GOOLOO AP150 PRO Portable Tire Inflator. Please read all instructions carefully before use and retain this manual for future reference.

2. Informazzjoni Importanti dwar is-Sigurtà

Always observe the following safety precautions to prevent injury or damage to the devices:

• Do not immerse the devices in water or expose them to rain.
• Do not operate the devices if they are damaged.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Do not disassemble the devices. Refer all servicing to qualified personnel.
• Uża biss l-aċċessorji pprovduti jew approvati.
• Kun żgur li jkun hemm ventilazzjoni xierqa waqt l-użu u l-iċċarġjar.
• Avoid short-circuiting the clamps of the jump starter.
• Taqbiżx il-batterija ffriżata.
• Wear eye protection when operating the jump starter.
• The tire inflator can become hot during prolonged use. Allow it to cool before handling.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• GOOLOO GP3000 Jump Starter
• Smart Jumper Clamps
• GOOLOO AP150 PRO Portable Tire Inflator
• Air Nozzle Adapters (various types)
• Cable tal-Iċċarġjar tal-USB-C
• Manwal għall-Utent
• Kawża tal-Ħażna

4. Prodott Aktarview

4.1 GOOLOO GP3000 Jump Starter

The GP3000 is a powerful 3000A peak current jump starter designed for 12-volt vehicles (up to 9-liter gasoline and 7-liter diesel engines). It also functions as a portable power bank and an emergency LED light.

Image: The GOOLOO GP3000 Jump Starter unit shown with its smart jumper clamps. The unit is black and yellow, featuring a power button and battery indicator lights.

Karatteristiċi ewlenin:

• Kurrent Massimu ta' 3000A: Capable of starting large engines.
• "BOOST" Function: For completely dead or low-voltage batteriji.
• Sistema Multi-Protezzjoni: Includes over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, spark-proof, over-voltage, tagħbija żejda, u protezzjoni kontra l-iċċarġjar invers.
• Bank tal-Enerġija li jinġarr: USB output ports for charging mobile devices.
• Flashlight LED: With Normal, Strobe, and SOS modes.

Image: The GOOLOO GP3000 Jump Starter highlighting its comprehensive safety features, including icons for over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, spark-proof, over-voltage, tagħbija żejda, u protezzjoni kontra l-iċċarġjar invers.

4.2 GOOLOO AP150 PRO Portable Tire Inflator

The AP150 PRO is a portable air compressor designed for fast and precise tire inflation. It features a dynamic LED display, multiple inflation modes, and also serves as a power bank and emergency light.

Image: The GOOLOO AP150 PRO Portable Tire Inflator shown with its various nozzle adapters and examples of vehicles and items it can inflate, such as cars, motorcycles, bicycles, and balls.

Karatteristiċi ewlenin:

• Super-Fast Inflation: High-performance motor for quick inflation.
• Dynamic Progress LED Display: Real-time tracking of inflation progress, visible even in bright sunlight.
• 5 Modi ta' Inflazzjoni: Car, motorcycle, bicycle, ball, and custom.
• 3 Pressure Units: PSI, KPA, BAR.
• Tifi Awtomatiku Intelliġenti: Automatically stops when the preset pressure is reached.
• High-Efficiency Battery Management System (BMS): Ensures safe and reliable operation.
• 45 Minutes Wireless Continuous Inflation: Long-lasting battery performance.
• Disinn Multifunzjonali 3 f'1: Air pump, mobile power supply, and emergency LED light (lighting and SOS modes).

Image: The GOOLOO AP150 PRO Tire Inflator's large LED screen, illustrating its five different inflation modes (car, motorcycle, bicycle, ball, and custom) with corresponding icons and color changes.

5. Setup u Iċċarġjar

5.1 Charging the GOOLOO GP3000 Jump Starter

Before first use, fully charge the GP3000. Connect the provided USB-C charging cable to the input port on the jump starter and to a USB wall adapter (not included). The battery indicator lights will illuminate to show charging progress. All lights will be solid when fully charged.

5.2 Charging the GOOLOO AP150 PRO Tire Inflator

Fully charge the AP150 PRO before initial use. Connect the provided USB-C charging cable to the charging port on the inflator and to a USB power source. The LED display will indicate the charging status. The device is fully charged when the battery icon shows full.

6. Istruzzjonijiet Operattivi

6.1 Operating the GOOLOO GP3000 Jump Starter

1. Kun żgur li l-jump starter huwa ċċarġjat mill-inqas 50%.
2. Qabbad il- aħmar clamp mat-terminal pożittiv (+) tal-batterija tal-vettura.
3. Qabbad il- iswed clamp mat-terminal negattiv (-) tal-batterija tal-vettura.
4. Żgura li l-clamps are securely connected and the smart cable indicator light is green.
5. If the indicator light is not green, or the vehicle battery is completely dead, press the BOOST button on the smart cable. Wait for the indicator light to turn green.
6. Ibda l-magna tal-vettura.
7. Ladarba tibda l-magna, neħħi immedjatament is-smart clamps from the vehicle battery, first the black clamp, then the red clamp.

Użu bħala Bank tal-Enerġija Portable:

Connect your USB-powered devices to the USB output ports on the GP3000 using appropriate charging cables. The jump starter will automatically begin charging your devices.

Image: The GOOLOO GP3000 Jump Starter demonstrating its function as a portable power bank, charging various electronic devices like smartphones, tablets, and smartwatches.

Bl-użu tad-Dawl LED:

Press and hold the power button on the GP3000 to turn on the LED flashlight. Press again to cycle through Normal, Strobe, and SOS modes. Press and hold to turn off.

Image: A user operating the GOOLOO GP3000 Jump Starter's LED light function in a dark engine bay, illustrating its utility as an emergency light source with Normal, Strobe, and SOS modes.

6.2 Operating the GOOLOO AP150 PRO Tire Inflator

1. Ensure the AP150 PRO is sufficiently charged.
2. Connect the air hose to the inflator and securely screw the nozzle onto the tire valve stem.
3. Press the power button to turn on the inflator. The LED display will show the current tire pressure.
4. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball, or custom).
5. Uża l-buttuni '+' u '-' biex tissettja l-pressjoni fil-mira.
6. Press the inflation button (often indicated by a fan icon) to start inflation. The display will show real-time pressure.
7. The inflator will automatically shut off once the preset pressure is reached.
8. Unscrew the nozzle from the tire valve and disconnect the air hose.

Image: The GOOLOO AP150 PRO Portable Tire Inflator actively inflating a car tire, demonstrating its cordless and fast inflation capability. The digital display shows the pressure reading.

Image: The GOOLOO AP150 PRO Tire Inflator's display showing both the real-time tire pressure and the preset target pressure, with clear visibility even in bright sunlight, and highlighting its auto shut-off feature.

Using as a Portable Power Bank and LED Light:

The AP150 PRO can also charge small electronic devices via its USB output port. It includes an integrated LED light with lighting and SOS modes, activated by a dedicated button, for use in emergencies or low-light conditions.

7. Manutenzjoni u Ħażna

• Clean the devices with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Store both devices in a cool, dry place, away from direct sunlight and extreme temperatures.
• For optimal battery life, charge both devices every 3-6 months, even if not in use.
• Keep the charging ports and air nozzle free from dust and debris.

8 Issolvi l-problemi

8.1 GP3000 Jump Starter Issues

• Vehicle does not start: Tiżgura clamps are connected correctly and securely. Check if the jump starter has sufficient charge. Try using the BOOST function if the battery is completely dead.
• Smart clamp indicator light is red: This indicates a reverse polarity connection or a short circuit. Disconnect and reconnect the clamps sewwa.

8.2 AP150 PRO Tire Inflator Issues

• L-inflator ma jixgħelx: Kun żgur li l-apparat ikun iċċarġjat.
• Inflator does not start pumping: Check if the hose is securely connected to both the inflator and the tire valve. Ensure a target pressure is set and the inflation button is pressed.
• Qari mhux preċiż tal-pressjoni: Ensure the nozzle is tightly screwed onto the tire valve to prevent air leakage.

9. Speċifikazzjonijiet

9.1 GOOLOO GP3000 Jump Starter

9.2 GOOLOO AP150 PRO Portable Tire Inflator

10. Garanzija u Appoġġ

GOOLOO products come with a standard warranty. For detailed warranty information, product support, or to report any issues, please visit the official GOOLOO website or contact their customer service directly. Contact information can typically be found on the product packaging or the GOOLOO brand store on Amazon.