XIXUBX 3.5 Bar Espresso & Cappuccino Machine User Manual

1. Introduzzjoni

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your new XIXUBX 3.5 Bar Espresso & Cappuccino Machine. Please read this manual thoroughly before first use and keep it for future reference.

2. Istruzzjonijiet Importanti dwar is-Sigurtà

• Dejjem kun żgur li l-magna titqiegħed fuq wiċċ stabbli u livellat.
• Tgħaddix l-apparat, korda, jew plagg fl-ilma jew likwidi oħra.
• Spluggja mill-iżbokk meta ma tkunx qed tuża u qabel tnaddaf. Ħallih jiksaħ qabel ma tpoġġi jew tneħħi l-partijiet, u qabel tnaddaf l-apparat.
• Tħaddim l-ebda apparat b'korda jew plagg bil-ħsara, jew wara li l-apparat ma jaħdimx jew ikun ġie bil-ħsara b'xi mod.
• Uża biss aċċessorji rakkomandati mill-manifattur.
• Superviżjoni mill-qrib hija meħtieġa meta xi apparat jintuża minn jew ħdejn it-tfal.
• Tmissx uċuħ sħan. Uża manki jew pumi.
• Ensure the handle is fully locked into place before brewing to prevent leaks and ensure safety.
• For optimal performance, allow the machine to cool down between multiple brews.
• Clean the steam wand after each use to avoid blockage.
• Do not take apart the appliance yourself if a malfunction occurs. Contact customer support.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• 1x Espresso Machine with Milk Frother
• 1x Filter and Portafilter
• 1x Manwal tal-Istruzzjonijiet (dan id-dokument)
• 1x Tamper and Spoon
• 1x Tritan Cup

4. Prodott Aktarview

Familiarize yourself with the components of your XIXUBX Espresso Machine.

Figura 1: Quddiem view of the XIXUBX 3.5 Bar Espresso & Cappuccino Machine, showing the main unit, portafilter, steam wand, and Tritan cup.

Komponenti Ewlenin:

• Għatu tat-Tank tal-Ilma: Located on top, for filling water.
• Pum tal-Kontroll: Single dial for Power On, Brew, and Steam functions.
• Portafiltru: Holds the coffee grounds for brewing. Features a built-in locking clip.
• Bastun tal-Fwar: Adjustable wand for frothing milk.
• Tritan Cup: BPA-free, durable cup with measurement markings.
• Trej tat-taqtir: Jiġbor likwidu żejjed.
• Dawl Indikatur tal-Enerġija: Indicates machine status.

5. Twaqqif u l-Ewwel Użu

Setup Inizjali:

1. Iftaħ il-komponenti kollha mill-pakkett u neħħi kwalunkwe materjal tal-ippakkjar.
2. Imsaħ il-barra tal-magna bl-adamp drapp.
3. Wash the portafilter, filter, Tritan cup, and steam wand sleeve with warm, soapy water. Rinse thoroughly and dry.
4. Place the machine on a stable, heat-resistant, and level surface.
5. Kun żgur li l-pum tal-kontroll ikun fil-pożizzjoni "MITFI".
6. Fill the Tritan cup with water up to the 4-cup mark.
7. Remove the water tank cap and pour the water into the water tank. Replace the cap securely.
8. Ipplaggja l-korda tad-dawl fi żbokk elettriku ertjat.

First Use (Cleaning Cycle):

Before making coffee for the first time, run a cleaning cycle to remove any manufacturing residues.

1. Fill the water tank with clean water (up to the 4-cup mark).
2. Insert the empty filter into the portafilter and attach the portafilter to the machine, locking it securely in the center.
3. Place the Tritan cup on the drip tray beneath the portafilter.
4. Rotate the control knob to the "Brew" position. Allow the machine to run until all water has passed through.
5. Turn the control knob to "OFF".
6. Empty the Tritan cup and discard the water.
7. Repeat steps 1-5 for the steam wand: Fill water, turn knob to "Steam", release steam for 3-5 seconds, then turn to "OFF".

6. Istruzzjonijiet Operattivi

6.1 Nagħmlu Espresso

Figura 2: Visual guide for making espresso.

1. Imla l-Ilma: Fill the Tritan cup with water up to the 4th mark and pour it into the coffee machine's water tank. Note: Do not exceed 4 cups of water.
2. Żid il-Kafè: Place the filter into the portafilter. Add dark roast, medium-coarse ground coffee to the filter. Tip: Use coffee powder larger than 0.5mm for better extraction. Avoid overly fine or oily blends to prevent clogging.
3. Tamp Kafè: Press the coffee grounds firmly with the tamper. Clean any residual coffee powder from the edge of the filter.
4. Install Portafilter: Align the portafilter with the group head latch and insert it into the machine at a 60° angle. Hold the machine top with your other hand and turn the portafilter to the right to lock it in position. Ensure it is securely locked to prevent leaks.
5. Poġġi t-Tazza: Place the Tritan cup (or your preferred espresso cup) on the drip tray beneath the portafilter.
6. Brew: Rotate the control knob to the "Brew" position. The machine will begin extracting espresso.
7. Stop Extraction: During brewing, stop when coffee reaches the second mark on the carafe to prevent excess water from weakening the taste. For optimal flavor, stop the extraction when the coffee reaches the third scale line on the Tritan cup.
8. Igawdu: Once brewing is complete, turn the control knob to "OFF". Carefully remove the portafilter by holding the unlock button and turning the handle left. Discard used grounds.

Figura 3: Illustration of correct water level for brewing (no more than 4 cups).

Figura 4: Comparison of coarse vs. fine coffee powder, recommending coarse for better extraction.

Figura 5: Steps for properly installing the portafilter.

Figura 6: Steps for correctly removing the portafilter.

6.2 Ir-Ragħwa tal-Ħalib

Figura 7: Visual guide for frothing milk.

1. Check Water: Ensure there is sufficient water in the machine's tank.
2. Ipprepara Ħalib: Pour a glass of refrigerated whole milk into a frothing pitcher. Tip: Refrigerated whole milk creates the best froth.
3. Preheat Steam Wand: Rotate the control knob to "Steam". Allow steam to release for 2 minutes to preheat the wand.
4. Ħalib bir-Ragħwa: Insert the steam wand tip approximately 0.2 to 0.4 inches into the milk.
5. Create Foam: The powerful and adjustable steam wand will produce smooth and dense milk foam.
6. Waqqaf il-Fwar: Once desired foam consistency is achieved, rotate the control knob to "OFF".
7. Bastun Nadif: Imsaħ il-bastun tal-fwar immedjatament b'adamp cloth after use to prevent milk residue from drying and blocking the nozzle.

Figura 8: Illustration showing refrigerated whole milk is recommended for frothing.

Figura 9: Illustration of the portafilter locked in the center for steady water flow.

7. Manutenzjoni u Tindif

Tindif u manutenzjoni regolari jiżguraw il-lonġevità u l-prestazzjoni ottimali tal-magna tal-espresso tiegħek.

7.1 Tindif ta 'Kuljum

• Bastun tal-Fwar: After each use, wipe the steam wand sleeve with a damp cloth. If the steam wand is blocked, gently twist and disassemble the outer tube of the steam wand, and then use the attached red pin to remove any blockage. Reinstall the sleeve.
• Portafilter and Filter: Remove the portafilter and discard used coffee grounds. Rinse the portafilter and filter under running water.
• Tritan Cup: Wash the Tritan cup with warm, soapy water and rinse thoroughly.
• Trej tat-taqtir: Battal u naddaf it-trej tat-taqtir regolarment.
• Barra: Imsaħ il-barra tal-magna b'artab, damp drapp. Tużax cleaners li joborxu jew għorik.

7.2 Tneħħija tal-Ġebla

Descaling should be performed periodically (e.g., every 2-3 months, depending on water hardness) to remove mineral deposits and maintain machine performance. Use a descaling solution specifically designed for coffee machines, following the manufacturer's instructions.

1. Prepare the descaling solution according to the product instructions and pour it into the water tank.
2. Poġġi kontenitur kbir taħt il-portafilter u l-wand tal-fwar.
3. Turn the machine on and run half of the descaling solution through the brew head (as if making coffee).
4. Turn the control knob to "Steam" and release the remaining solution through the steam wand.
5. Turn the machine off and let it sit for 15-20 minutes.
6. Laħlaħ it-tank tal-ilma sewwa u imlieh b'ilma frisk.
7. Repeat steps 3-5 with fresh water to rinse out any descaling solution.

8 Issolvi l-problemi

Refer to the table below for common issues and their solutions. If the problem persists, please contact customer support.

Importanti: Do not attempt to disassemble the appliance yourself if the cause of failure is not found. Contact customer support for assistance.

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ għall-Klijent

For warranty information or technical support, please contact XIXUBX customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Appoġġ onlajn: Żur il- XIXUBX Store on Amazon for FAQs and additional product information.