Invacare Essential SX3 Manual Wheelchair User Manual

Introduzzjoni

This manual provides essential instructions for the safe and effective use, assembly, maintenance, and troubleshooting of your Invacare Essential SX3 Manual Wheelchair. Please read this manual thoroughly before using the wheelchair to ensure proper operation and to prevent injury.

Prodott Overview

The Invacare Essential SX3 Manual Wheelchair is designed for adults requiring mobility assistance. It features a lightweight, foldable frame, comfortable padded armrests, and adjustable footrests for enhanced user experience.

Figura 1: Invacare Essential SX3 Manual Wheelchair, front-side view.

Karatteristiċi ewlenin:

• Flip-Back Desk Length Armrests: Padded armrests designed for easy access to desks and tables, and for simplified transfers.
• Disinn Ħafif u li Jintrewa: Weighs approximately 38 lbs and folds to 12.3 inches wide for transport and storage.
• Fond tas-Sedil Aġġustabbli: Standard 16-inch depth, extendable by 2 inches with an included kit.
• Durable Vinyl Upholstery: Easy to clean and resistant to wear.
• Swing-Away and Adjustable Footrests: Removable and height-adjustable for user comfort and easier transfers.
• Smooth-Rolling Wheels: 8-inch PVC front wheels and 24-inch rear mag PU tires with built-in wheel locks.

Komponenti

Familiarize yourself with the main components of your wheelchair:

• Qafas: Powder-coated steel frame.
• Sedil u Serħan tad-Dahar: Vinyl upholstery.
• Pulzieri: Padded, flip-back, desk-length.
• Footrests/Legrests: Swing-away, height-adjustable.
• Casters ta' quddiem: 8-inch PVC wheels.
• Roti ta' wara: 24-inch mag PU tires with push-rims.
• Serraturi tar-Roti: For securing the wheelchair.
• Push Handles: For attendant propulsion.

Figura 2: Quddiem view of the wheelchair, showing footrests and front casters.

Setup u Assemblea

The Invacare Essential SX3 Wheelchair arrives fully assembled. Follow these steps for initial preparation:

1. Kif tiftaħ is-Siġġu tar-Roti:
   • Poġġi s-siġġu tar-roti mitwi fuq wiċċ ċatt u stabbli.
   • Grasp the push handles and gently pull them apart until the wheelchair frame begins to open.
   • Push down firmly on both sides of the seat rails until the seat is fully flat and locked into position. Ensure there is an audible click.
2. Attaching/Adjusting Footrests:
   • Align the footrest hangers with the receiver brackets on the front of the wheelchair frame.
   • Swing the footrests inward until they lock into place.
   • To adjust the height, press the release button on the legrest tube and slide the footplate up or down to the desired position. Release the button to lock.
   • To remove, swing the footrests outward and lift them off the receiver brackets.
3. Adjusting Seat Depth (Optional):
   • The wheelchair includes a kit to extend the seat depth by 2 inches. Refer to the separate instructions provided with the extension kit for detailed installation.
4. Inspecting Wheelchair: Before first use, ensure all components are securely attached, wheels roll freely, and wheel locks engage properly.

Figura 3: Flip-back armrests allow seamless access to desks and tables.

Istruzzjonijiet Operattivi

Self-Propulsion:

• Grasp the push-rims on the rear wheels.
• Push forward on the rims to move forward, and pull back to slow down or reverse.
• To turn, apply more force to one push-rim than the other.

Attendant Propulsion:

• An attendant can push the wheelchair using the ergonomic non-slip hand grips on the back of the chair.
• Use the integrated steel step tube to assist in lifting the front casters over small obstacles like curbs or bumps.

Figura 4: Attendant pushing the wheelchair, demonstrating the use of the integrated step tube.

Engaging Wheel Locks:

• Always engage both wheel locks when transferring in or out of the wheelchair, or when stationary.
• Push the lever on each wheel lock forward until it clicks into place, securing the rear wheels.
• To disengage, pull the lever back.

Figura 5: Close-up of the secure locking wheel mechanism.

Tiwi tas-Siġġu tar-Roti:

• Ensure footrests are swung away or removed.
• Grasp the center of the seat upholstery and lift upwards. The frame will begin to collapse inward.
• Continue lifting until the wheelchair is fully folded.

Figura 6: The wheelchair folds compactly for storage and transport.

Manutenzjoni

Tindif:

• Wipe down the vinyl upholstery and frame with a damp drapp u sapun ħafif.
• Evita cleaners li joborxu jew solventi li jistgħu jagħmlu ħsara lill-finitura.
• Nixxef sewwa wara t-tindif.

Spezzjoni:

• Regularly check all nuts, bolts, and fasteners for tightness.
• Inspect tires for wear and proper inflation (if applicable for rear tires).
• Ensure wheel locks engage and disengage smoothly and securely.
• Check armrests and footrests for secure attachment and proper function.

Issolvi l-problemi

Speċifikazzjonijiet

• Numru tal-Mudell: ISX366DASA
• Product Dimensions (Open): 31.88 x 24.25 x 34 pulzieri
• Piż: 38 Liri
• Wisa 'tas-Sede: 16 pulzieri
• Fond tas-Sedil: 16 inches (extendable to 18 inches)
• Roti ta' quddiem: 8-inch PVC
• Roti ta' wara: 24-inch Mag PU tires
• Manifattur: Invacare

Figura 7: Key dimensions and maximum weight capacity of the wheelchair.

Informazzjoni dwar is-Sigurtà

• Always engage wheel locks before transferring in or out of the wheelchair.
• Do not attempt to operate the wheelchair on steep inclines or declines without assistance.
• Kun żgur li l-partijiet kollha huma mwaħħlin sew qabel kull użu.
• Taqbiżx il-kapaċità ta 'piż massimu ta' 265 lbs.
• Avoid sudden movements or changes in direction that could cause instability.
• Regularly inspect the wheelchair for any signs of wear or damage. Do not use if damaged.

Garanzija u Appoġġ

For warranty information and customer support, please contact Invacare directly. Refer to the product packaging or the official Invacare webis-sit għal termini speċifiċi tal-garanzija u dettalji ta' kuntatt.

Manifattur: Invacare

Politika ta' Ritorn: 30-day return policy (as per Amazon listing at time of purchase).