ULANZI Fog Liquid Fluid Instruction Manual

1. Introduzzjoni

The ULANZI Fog Liquid Fluid is a specially formulated, water-based solution designed for use with compatible portable fog machines, such as the ULANZI FILMOG Ace. This fluid produces a medium-density fog suitable for various applications including lighting enhancement, photography, outdoor events, parties, stage effects, Halloween, and weddings.

Figure 1: ULANZI Fog Liquid Fluid (60ml bottle)

2. Prodott Aktarview

This product consists of two 60ml bottles of ULANZI Fog Liquid Fluid. It is non-toxic, non-flammable, and unscented, formulated with premium pharmaceutical-grade chemicals. The high-density formulation ensures good hang time and excellent dispersion of fog without staining or leaving residue.

• Premium Water-Based Formula: Non-toxic, non-flammable, and unscented.
• High Density: Delivers good hang time and excellent dispersion.
• Mingħajr Residwi: Will not stain surfaces or leave unwanted residue.
• Kompatibilità: Specifically designed for ULANZI FILMOG Fog Machines and other water-based foggers.

3. Informazzjoni dwar is-Sigurtà

Avviż Importanti dwar is-Sigurtà:

• Do not mix this fog liquid with other liquids or solids.
• Do not drink the fog liquid. If accidental ingestion occurs, seek immediate medical attention.
• In case of contact with eyes, rinse immediately and thoroughly with plenty of water.
• Żomm fejn ma jintlaħaqx mit-tfal u l-annimali domestiċi.

Figure 2: Product specifications and safety notice as printed on packaging.

4. Setup

1. Ensure your fog machine is compatible with water-based fog fluids. The ULANZI Fog Liquid Fluid is specifically designed for ULANZI FILMOG Fog Machines.
2. Locate the fluid reservoir on your fog machine.
3. Carefully open a bottle of ULANZI Fog Liquid Fluid.
4. Pour the fluid directly into the fog machine's reservoir. Do not overfill.
5. Securely close the reservoir cap after filling.

5. Joperaw

1. After filling the reservoir, allow the fog machine to warm up according to its specific instructions.
2. Activate the fog machine as per its operational guidelines. The ULANZI Fog Liquid Fluid will produce a consistent, medium-density fog.
3. Monitor the fluid level during operation and refill as needed to prevent the machine from running dry.
4. For optimal effects, use in well-ventilated areas or as required by your specific application (e.g., photography, stage effects).

Figure 3: ULANZI portable fog machine in operation, producing fog.

Figura 4: Eżample use of fog machine for special effects in photography.

6. Manutenzjoni

• Ħażna: Store the ULANZI Fog Liquid Fluid in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the bottles tightly sealed when not in use.
• Tindif: If any fluid spills, wipe it immediately with a damp cloth. The fluid is designed not to stain or leave residue.
• Rimi: Dispose of empty bottles and any unused fluid according to local environmental regulations.

7 Issolvi l-problemi

• No Fog Production:
  • Check if the fog machine's reservoir is empty. Refill if necessary.
  • Ensure the fog machine is properly warmed up and powered on.
  • Verify that the fog machine's pump is functioning correctly.
• Low Fog Output:
  • Confirm the fluid level is adequate.
  • Ensure the fog machine's nozzle is not obstructed.
  • Check the fog machine's temperature; it might not be at optimal operating temperature.
• Riħa mhux tas-soltu:
  • The ULANZI Fog Liquid Fluid is unscented. If an unusual odor is detected, discontinue use and consult your fog machine's manual or manufacturer. Do not mix with other fluids.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information and technical support regarding ULANZI products, please refer to the documentation provided with your ULANZI fog machine or visit the official ULANZI websit. Id-dettalji ta' kuntatt għas-servizz tal-konsumatur tipikament jistgħu jinstabu fuq l-imballaġġ tal-prodott jew fuq il-paġna tal-manifattur websit.

You can visit the ULANZI Store for more information: ULANZI Official Store