CREWORKS 6L Ultrasonic Cleaner User Manual

1. Introduzzjoni

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 6L Ultrasonic Cleaner. This device utilizes ultrasonic cavitation to thoroughly clean various items, offering both Degas and Gentle cleaning modes for optimal results. Please read this manual carefully before use and retain it for future reference.

2. Informazzjoni dwar is-Sigurtà

• Dejjem qabbad l-unità ma' sokit tal-elettriku ertjat.
• Tħaddimx l-apparat tat-tindif mingħajr likwidu fit-tank.
• Ensure the power cord is not damaged and avoid pulling it to disconnect.
• Keep the unit away from water or other liquids to prevent electric shock.
• Tgħaddix l-unità prinċipali fl-ilma.
• Qabbad l-unità qabel ma tnaddaf jew tagħmel manutenzjoni.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Use only recommended cleaning solutions. Avoid flammable or corrosive liquids.
• Do not touch the tank or solution during operation, as it may become hot.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• CREWORKS 6L Ultrasonic Cleaner Unit
• Stainless Steel Cleaning Basket
• Għatu
• Korda tal-Enerġija
• 34 fl oz (1000 mL) CREWORKS Heavy Duty Cleaner & Degreaser Solution
• Manwal għall-Utent (dan id-dokument)

4. Setup

1. Pjazzament: Place the ultrasonic cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation around the unit.
2. Imla t-Tank: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the 'MIN' and 'MAX' marks. For general cleaning, use water. For enhanced cleaning, use the provided CREWORKS Heavy Duty Cleaner & Degreaser solution diluted at a 1:10 ratio with water.
3. Daħħal il-Basket: Poġġi l-basket tat-tindif fit-tank.
4. Qabbad l-Enerġija: Plug the power cord into the unit's power inlet, then connect it to a grounded electrical outlet.

5. Istruzzjonijiet Operattivi

The CREWORKS 6L Ultrasonic Cleaner features intuitive controls for temperature, time, and cleaning modes.

1. Qawwa Mixgħul: Turn the main power switch to the 'ON' position. The digital display will illuminate.
2. Issettjat Temperatura: Use the 'TEMP' knob to set the desired cleaning temperature. The temperature range is 70-210°F (20-100°C). Heating helps improve cleaning efficiency, especially for stubborn grime.
3. Issettja l-Timer: Use the 'TIME' knob to set the cleaning duration. The timer can be set from 1 to 30 minutes. For delicate items, start with a shorter duration.
4. Agħżel il-Modalità tat-Tindif:
   • Degas Mode: Press the 'DEGAS' button. This mode removes dissolved gases from the cleaning solution, which can improve ultrasonic efficiency and prevent oxidation of cleaned objects. It is recommended to run a degas cycle for a few minutes when using fresh solution.
   • Modalità Ġentili: Press the 'GENTLE' button. This mode reduces the ultrasonic intensity, providing a softer cleaning action suitable for delicate or sensitive items that might be damaged by full power cavitation.
5. Ibda t-Tindif: Once temperature, time, and mode are set, press the 'ON/OFF' button to start the ultrasonic cleaning process. The unit will automatically stop when the timer expires.
6. Wara t-Tindif: Turn off the unit, unplug it, and carefully remove the cleaning basket. Rinse the cleaned items with clean water and dry them thoroughly.

6. Using the CREWORKS Heavy Duty Cleaner & Degreaser Solution

The included 34 fl oz CREWORKS Heavy Duty Cleaner & Degreaser solution is designed to enhance the cleaning power of your ultrasonic cleaner, particularly for stubborn grease, oil, and grime.

• Dilwizzjoni: This is a concentrated solution. Dilute it with water at a 1:10 ratio (1 part solution to 10 parts water) before adding it to the ultrasonic cleaner tank.
• Applikazzjonijiet: Ideal for cleaning engine parts, carburetors, gun parts, electronic components, bicycle chains, metals, and plastics. It effectively removes grease buildup, persistent residues, tight corner grime, and stubborn stains.
• Kompatibilità: Safe for use with most metals, alloys, and plastics. Always test on an inconspicuous area first if unsure.

7. Manutenzjoni u Tindif

1. Ixxotta t-Tank: After each use, especially with cleaning solutions, drain the tank. Use the drain valve located on the side of the unit to empty the liquid into a suitable container.
2. Tindif tat-Tank: Rinse the stainless steel tank with clean water. Wipe the interior and exterior of the unit with a soft, damp drapp. Tużax prodotti tat-tindif li joborxu jew tgħaddasx l-unità prinċipali fl-ilma.
3. Ħażna: Ensure the unit is completely dry before storing. Store in a cool, dry place away from direct sunlight and moisture.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

• Mudell: CREWORKS 6L Ultrasonic Cleaner
• Kapaċità tat-Tank: 6 Litri
• Qawwa ultrasonika: 180W
• Qawwa tat-Tisħin: 300W
• Frekwenza ultrasonika: 40 kHz
• Kontroll tat-temperatura: 70-210°F (20-100°C)
• Kontroll tat-Tajmer: 1-30 minuta
• Modi: Degas, Gentle
• Soluzzjoni tat-Tindif: CREWORKS Heavy Duty Cleaner & Degreaser (34 fl oz)
• ASIN: B0DYJCGRNQ
• Data L-Ewwel Disponibbli: 26 ta’ Frar, 2025

10. Garanzija u Appoġġ

For warranty information, technical support, or service inquiries, please refer to the official CREWORKS webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.