1. Introduzzjoni
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your TOTAL TIWLI20401 Cordless Impact Wrench. Please read this manual thoroughly before using the tool and retain it for future reference.
The TOTAL TIWLI20401 is a powerful and efficient cordless impact wrench designed for fastening and loosening applications. It features a brushless motor for enhanced durability and performance, a 1/2 inch square drive, and an integrated LED work light.
2. Istruzzjonijiet tas-Sigurtà
Dejjem osserva l-prekawzjonijiet bażiċi ta’ sigurtà biex tnaqqas ir-riskju ta’ nar, xokk elettriku, u korriment personali meta tħaddem għodod tal-enerġija.
- Sigurtà taż-Żona tax-Xogħol: Żomm iż-żona tax-xogħol nadifa u mdawwla sew. Żoni imbarazzati jew mudlama jistiednu inċidenti. Tħaddimx għodod tal-enerġija f'atmosferi splussivi, bħal fil-preżenza ta' likwidi, gassijiet jew trab fjammabbli.
- Sigurtà Elettrika: Evita kuntatt tal-ġisem ma' uċuħ imqabbdin mal-art jew mal-art. Tesponix għodod tal-elettriku għax-xita jew għal kundizzjonijiet imxarrbin.
- Sigurtà Personali: Dejjem ilbes protezzjoni għall-għajnejn. Uża protezzjoni għas-smigħ meta tħaddem l-għodda għal perjodi twal. Ilbes sew; evita ħwejjeġ jew ġojjelli laxki. Assigura xagħrek twil.
- Użu u Kura tal-Għodda: Tisforzax l-għodda tal-enerġija. Uża l-għodda tal-enerġija korretta għall-applikazzjoni tiegħek. Skonnettja l-pakkett tal-batterija mill-għodda tal-enerġija qabel ma tagħmel xi aġġustamenti, tibdel l-aċċessorji, jew taħżen l-għodda tal-enerġija.
- Sigurtà tal-Pakkett tal-Batterija: Use only the specified battery pack for this tool. Do not incinerate the battery pack even if it is severely damaged.
3. Komponenti u Karatteristiċi
Familiarize yourself with the key components and features of your TOTAL TIWLI20401 Cordless Impact Wrench.
Figura 1: Prinċipali view of the TOTAL TIWLI20401 Cordless Impact Wrench, highlighting its ergonomic design and brushless motor branding.
- Mutur mingħajr brushes: Provides higher efficiency, longer durability, and reduced maintenance compared to brushed motors.
- 1/2 Inch Square Drive: Ensures a secure and stable connection for various socket sizes.
- Trigger tal-Veloċità Varjabbli: Allows for precise control over the rotation speed, adapting to different application requirements.
- Swiċċ 'il Quddiem/Lura: Easily change the direction of rotation for fastening and loosening tasks.
- Dawl tax-Xogħol LED Integrat: Idawwal iż-żona tax-xogħol għal viżibilità mtejba f'kundizzjonijiet ta' dawl baxx.
- Output Torque Għoli: Offers a fastening torque of 400Nm and a nut-busting torque of 550Nm for demanding applications.
Figure 2: The impact wrench shown with common socket sizes (17mm, 19mm, 21mm) and its packaging. Note that the battery and charger are sold separately.
4. Setup
4.1. Installazzjoni tal-Batterija (Il-Batterija u l-Ċarġer Jinbiegħu Separatament)
- Kun żgur li l-pakkett tal-batterija huwa kompletament iċċarġjat qabel l-użu.
- Align the battery pack with the battery port at the base of the impact wrench.
- Żerżaq il-pakkett tal-batterija fil-port sakemm tikklikkja sew f'postu.
- Biex tneħħiha, agħfas il-buttuna tar-rilaxx tal-batterija (jekk preżenti) u żżerżaq il-pakkett tal-batterija 'l barra.
4.2. Socket Attachment
- Ensure the tool is switched off and the battery is removed before attaching or removing sockets.
- Select the appropriate 1/2 inch square drive impact socket for your application.
- Push the socket firmly onto the square drive anvil until it locks into place.
- To remove, pull the socket off the anvil. Some sockets may require pulling back a retaining ring or pin.
5. Istruzzjonijiet Operattivi
5.1. Tixgħil / Mitfi
The tool is powered on by pressing the variable speed trigger and powered off by releasing it.
5.2. L-Għażla tad-Direzzjoni tar-Rotazzjoni ('il Quddiem/Lura)
The forward/reverse switch is located above the trigger. Push the switch to the left for forward rotation (fastening) and to the right for reverse rotation (loosening). Ensure the switch is in the center position to lock the trigger and prevent accidental starting.
5.3. Kontroll tal-Veloċità Varjabbli
The tool's speed is controlled by the pressure applied to the trigger. Pressing the trigger lightly results in lower speed, while pressing it fully increases the speed up to the maximum. This allows for precise control depending on the task.
5.4. Fastening and Loosening
- Select the correct socket and attach it securely.
- Set the forward/reverse switch to the desired direction.
- Poġġi s-sokit fuq il-qafla.
- Gradually press the trigger to start the tool. Apply steady pressure to the tool to prevent kickback.
- For fastening, tighten until the desired torque is achieved. For loosening, continue until the fastener is free.
Caution: Always ensure the fastener and socket are correctly aligned to prevent damage to both the tool and the fastener.
6. Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-impact wrench tiegħek.
- Tindif: Żomm il-fetħiet tal-ventilazzjoni tal-għodda nodfa biex tevita li tissaħħan iżżejjed. Uża suf artab u nadif.amp cloth to clean the housing. Do not use harsh chemicals or abrasive cleaners.
- Ħażna: Store the tool and battery pack in a cool, dry place, away from direct sunlight and moisture. Keep out of reach of children.
- Kura tal-batterija: If the battery pack is not used for extended periods, charge it periodically to maintain its capacity. Do not store discharged battery packs.
- Spezzjoni: Periodically inspect the power tool for any damaged parts, loose screws, or worn components. Have any necessary repairs performed by qualified service personnel.
7 Issolvi l-problemi
Irreferi għal din it-taqsima għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Għodda ma tibda. | Batterija mhux iċċarġjata jew installata ħażin. Forward/Reverse switch in center (locked) position. | Kun żgur li l-batterija hija ċċarġjata u mdaħħla sew. Move switch to forward or reverse position. |
| Insufficient torque. | Ħlas baxx tal-batterija. Incorrect socket size. Tool not suitable for application. | Recharge batterija. Use the correct size impact socket. Verify tool specifications meet job requirements. |
| L-għodda tissaħħan iżżejjed. | Użu tqil għal żmien twil. Aperturi tal-ventilazzjoni mblukkati. | Ħalli l-għodda tiksaħ. Clean ventilation openings. Reduce load. |
If the problem persists after attempting these solutions, contact TOTAL customer support or a qualified service center.
8. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | TIWLI20401 |
| Manifattur | TOTAL |
| Voltage | 20 Volts |
| Torque tal-irbit | 400 Nm |
| Torque tal-Ġewż | 550 Nm |
| Veloċità Bla Tagħbija | 0-1600 / 0-2300 rpm |
| Rata tal-Impatt | 0-2100 / 0-2900 bpm |
| Daqs tas-sewqan | Kwadru ta' 1/2 pulzier |
| Piż tal-oġġett | 1.26 Kilogrammi |
| Dimensjonijiet tal-Pakkett | 24.2 x 16.8 x 8 ċm |
| Komponenti Inklużi | 1 x Total TIWLI20401 20V 400Nm Cordless Impact Wrench (Battery and Charger Sold Separately) |
9. Garanzija u Appoġġ
For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official TOTAL websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.
For further assistance, you may contact TOTAL customer service through their official channels.
