Ras Mobbli Colorkey Creator Spot 250 Stage Manwal ta' Istruzzjoni Dawl

1. Introduzzjoni

This manual provides essential information for the safe and efficient operation of your Colorkey Creator Spot 250 Moving Head Stage Light. Please read these instructions thoroughly before installation, operation, or maintenance to ensure proper use and to prevent damage to the unit or injury to personnel.

The Colorkey Creator Spot 250 is a compact and bright 200W LED Moving Head Spot fixture designed for professional stage and event lighting. It features rotating and static gobos, a 6-facet prism, and vibrant color effects, making it a versatile tool for various lighting applications.

2. Informazzjoni dwar is-Sigurtà

Always observe the following safety precautions to reduce the risk of electrical shock, fire, or personal injury:

• Konnessjoni Elettrika: Tiżgura l-provvista tal-enerġija voltage jaqbel mal-voltage specified on the fixture. Always connect to a grounded circuit.
• Installazzjoni: Install the fixture in a well-ventilated area, away from flammable materials. Ensure secure mounting to prevent accidental falls.
• Temperatura: Do not operate the fixture in environments exceeding 40°C (104°F). Allow adequate space around the fixture for cooling.
• Manutenzjoni: Disconnect the fixture from the power supply before any cleaning, maintenance, or repair. Only qualified personnel should perform service.
• Sigurtà tal-għajnejn: Avoid direct eye exposure to the light source. The light output is intense and can cause eye damage.
• Espożizzjoni għall-Ilma: Do not expose the fixture to rain or moisture. This fixture is for indoor use only.

3. Prodott Aktarview

3.1 Karatteristiċi ewlenin

• Light Source: 200W White LED; Halo: 20pcs RGB LEDs, with rich built-in dynamic effects.
• Brightness: 8650 lux @ 5 meters.
• Beam Angle: 14°, with a 64mm output lens diameter.
• Color Wheel: 8 colors + open, split colors, and rainbow effect.
• Static Gobo Wheel: 7 gobos + open, with gobo shake.
• Rotating Gobo Wheel: 6 gobos + open, with gobo shake, Texture.

3.2 X'hemm fil-Kaxxa

• Colorkey Creator Spot 250 Lighting Fixture
• Power Cable (Corded Electric)
• Manwal ta 'Istruzzjoni (dan id-dokument)

3.3 Dijagramma tal-Prodott

Figura 1: Quddiem view of the Colorkey Creator Spot 250. The image displays the black moving head fixture with its lens emitting a vibrant, multi-colored light. The base features a control panel with an LCD screen and navigation buttons (Menu, OK, Up, Down, Back), along with the "CREATOR SPOT 250" branding.

4. Setup

4.1 Immuntar

The Creator Spot 250 can be mounted in various orientations (e.g., truss, floor). Always use appropriate clamps and safety cables to secure the fixture. Ensure the mounting surface or structure can support the fixture's weight (approximately 38 pounds) and any additional equipment.

4.2 Konnessjoni tal-Enerġija

Connect the provided power cable to the fixture's power input and then to a suitable grounded electrical outlet. Verify that the power supply voltage jaqbel mar-rekwiżiti tal-attrezzatura.

4.3 Konnessjoni DMX (Mhux obbligatorja)

For external control, connect a DMX controller to the fixture's DMX input using a standard 3-pin or 5-pin DMX cable. If linking multiple fixtures, connect them in a daisy chain configuration, ensuring the last fixture in the chain has a DMX terminator installed.

5. Istruzzjonijiet Operattivi

5.1 Panel tal-Kontroll

The fixture features an intuitive control panel with an LCD display and navigation buttons:

• MENU: Accesses the main menu or navigates back to the previous menu level.
• FUQ ISFEL: Navigates through menu options or adjusts parameter values.
• KOLLOX SEW: Jikkonferma għażla jew jidħol f'submenu.
• Lura: Joħroġ mill-menu attwali jew jikkanċella azzjoni.

The LCD display shows current settings, DMX address, and operational status. Refer to the on-screen menu for specific parameter adjustments.

5.2 Kontroll tad-DMX

To control the Creator Spot 250 via DMX, set the fixture's DMX address using the control panel. Consult the DMX channel chart (typically found in a separate DMX protocol document or appendix) for detailed information on controlling specific functions like pan, tilt, color, gobos, and prism effects.

5.3 Operazzjoni waħedha

The fixture includes built-in programs for standalone operation without an external DMX controller. These programs can be selected and configured via the control panel menu. Options typically include sound-active modes, auto-run sequences, and master/slave configurations.

6. Manutenzjoni

Regular maintenance ensures optimal performance and extends the lifespan of your Creator Spot 250.

• Tindif: Periodically clean the exterior casing and optical lenses with a soft, lint-free cloth. For stubborn dirt, use a mild glass cleaner. Ensure no liquid enters the fixture.
• Spezzjoni: Regularly inspect power cables, DMX cables, and mounting hardware for any signs of wear, damage, or loose connections.
• Ventilazzjoni: Kun żgur li l-fetħiet tal-ventilazzjoni huma nodfa mit-trab u l-fdalijiet biex tevita li jisħnu żżejjed.
• Internal Service: Internal cleaning or repairs should only be performed by authorized service technicians.

7 Issolvi l-problemi

If you encounter issues with your Creator Spot 250, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Colorkey customer support.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information and technical support, please refer to the official Colorkey webis-sit jew ikkuntattja lin-negozjant awtorizzat tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.

Colorkey Support: Żur il-Colorkey Store fuq Amazon