RADIOMASTER HP0157-0043-M2

Radiomaster Boxer 2.4G 16ch ELRS Transmitter Instruction Manual

Model: HP0157-0043-M2

1. Introduzzjoni

The Radiomaster Boxer is a compact, ergonomic, and powerful radio control transmitter designed for precision control in various RC applications. It features full-size Hall effect gimbals and an intuitive button layout, making it an ideal choice for pilots seeking comfort and functionality without compromising on size.

This transmitter comes preinstalled with the EdgeTX operating system, leveraging cutting-edge software with class-leading hardware. It is available with an internal 2.4GHz ExpressLRS (ELRS) module, offering high-power, fan-cooled operation for reliable long-distance control, minimal latency, and high refresh rates. Alternatively, a 4-in-1 Multi-module (CC2500, NRF24L01, A7105, CYRF6936) or CC2500-only version is also available.

The Boxer is powered by a robust STM32F407VGT6 processor with 1MB Flash and 192KB RAM, ensuring smooth performance. Its oversized battery compartment accommodates a 2S 6200mAh pack, providing up to 20 hours of operation (batteries not included).

2. Informazzjoni dwar is-Sigurtà

Please refer to this instruction manual before using the Radiomaster Boxer transmitter. Adhere to all safety guidelines to ensure safe operation and prevent damage to the device or injury to yourself and others.

3. X'hemm fil-Kaxxa

Radiomaster Boxer Transmitter, Carry Case, and Accessories

Image: Radiomaster Boxer Transmitter with its included carry case and accessories.

Your Radiomaster Boxer package includes the following items:

4. Setup

4.1. Installazzjoni tal-antenna

Before powering on your Radiomaster Boxer, ensure the T-shaped antenna is securely installed. The antenna screws into the connector located at the top rear of the transmitter.

Installing the T-shaped antenna on the Radiomaster Boxer transmitter.

Image: Proper installation of the T-shaped antenna.

4.2. Installazzjoni tal-batterija

The Radiomaster Boxer features an oversized battery compartment designed to accommodate a 2S 6200mAh Li-Po battery pack for extended use. Batteries are not included and must be purchased separately. The transmitter also supports a battery pack for AA batteries as an alternative.

Wara view of the Radiomaster Boxer transmitter showing the battery compartment.

Immaġni: Wara view of the transmitter with the battery compartment.

Biex tinstalla l-batterija:

  1. Iftaħ l-għatu tal-kompartiment tal-batterija fuq wara tat-trasmettitur.
  2. Connect the battery's power connector to the corresponding port inside the compartment.
  3. Poġġi l-batterija fil-kompartiment bir-reqqa.
  4. Close the battery compartment cover, ensuring it clicks securely into place.

Video: Demonstration of 6200mAh battery installation in a Radiomaster Boxer transmitter.

4.3. Slott tal-Karta SD

The transmitter includes a redesigned SD card slot with a pre-loaded SD card. This is essential for the EdgeTX operating system and for storing model configurations and other data.

Close-up of the SD card slot in the Radiomaster Boxer transmitter.

Image: Location of the SD card slot.

5. Istruzzjonijiet Operattivi

5.1. Tixgħil / Mitfi

To power on the transmitter, press and hold the power button located centrally above the screen until the boot sequence begins and the screen displays 'EdgeTX'. To power off, press and hold the power button again until the shutdown sequence completes.

Vidjo: Fuqview of the Radiomaster Boxer M2 ELRS Portable RC Transmitter, including power on/off and basic navigation.

5.2. Kontrolli Fuqview

The Radiomaster Boxer features a comprehensive set of controls for precise operation:

Diagram of Radiomaster Boxer controls, including gimbals, switches, buttons, and ports.

Image: Detailed diagram of the Radiomaster Boxer's controls.

5.3. EdgeTX Operating System

The EdgeTX operating system offers extensive customization and functionality. Use the SYS button to access system settings, and the PAGE buttons and scroll wheel to navigate through menus and adjust parameters. Refer to the official EdgeTX documentation for detailed instructions on advanced features and model setup.

Video: Demonstration of the Radiomaster Boxer Crush RC Transmitter with EdgeTX Operating System, highlighting its features and interface.

6. Manutenzjoni

7 Issolvi l-problemi

8. Speċifikazzjonijiet

Karatteristika Dettall
Dimensjonijiet tal-Prodott 7 x 6 x 2 pulzieri
Numru tal-Mudell tal-Oġġett HP0157-0043-M2
Brand RADIOMASTER
Kulur Iswed
Numru ta 'Kanali 16
Karatteristiċi Speċjali Long Range, Portable, Lightweight
Medda ta' Frekwenzi 2.400GHz-2.480GHz
Livell ta 'Reżistenza għall-Ilma Mhux Reżistenti għall-Ilma
Apparati Kompatibbli Two-way radios and receivers using JR/FrSKY/Crossfire, ExpressLRS (ELRS), and other protocols supported by external modules
Ħajja tal-batterija Up to 20 Hours (with 2S 6200mAh pack)
Radiomaster Boxer Transmitter with key dimensions labeled.

Image: Radiomaster Boxer dimensions: 235mm height, 178mm width, 76.7mm depth.

9. Garanzija u Appoġġ

For warranty information and technical support, please refer to the official Radiomaster webis-sit jew ikkuntattja lin-negozjant awtorizzat tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.

Online resources, including firmware updates and detailed manuals, are often available on the manufacturer's websit.