1. Introduzzjoni
The Dynasty ProAudio PX2 is a high-definition multi-source home audio preamplifier designed to provide exceptional audio clarity and extensive connectivity. Featuring optimized low-noise circuitry, a 3-band EQ, and a low-cut crossover, the PX2 ensures a superior listening experience with wide frequency response and minimal distortion. Its versatile design includes Bluetooth 5.3 with Qualcomm® aptX™ Lossless technology for wireless streaming, a USB DAC interface for digital audio, and multiple analog and digital inputs to accommodate various audio sources.
2. Informazzjoni dwar is-Sigurtà
- Aqra l-istruzzjonijiet kollha bir-reqqa qabel ma tħaddem l-apparat.
- Żomm il-manwal għal referenza futura.
- Tesponix l-unità għall-umdità, xita, jew temperaturi estremi.
- Żgura ventilazzjoni xierqa biex tevita sħana żejda.
- Skonnettja l-provvista tal-enerġija waqt maltempati bis-sajjetti jew meta ma tkunx qed tintuża għal perjodi twal.
- Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat.
3. Kontenut tal-Pakkett
- Dynasty ProAudio PX2 Preampaktar ħaj
4. Prodott Aktarview
4.1 Panel ta 'Quddiem
Immaġni: Quddiem view of the Dynasty ProAudio PX2 Preamplifier, showing various controls and inputs.
The front panel provides access to power, microphone input, headphone output, various input selectors, tone controls (Bass, Mid, Treble), Loudness, Balance, and Master Volume. Dedicated buttons for Tape, Phono, Mono, Mute, and Pairing are also present.
4.2 Panel ta 'wara
Immaġni: Wara view of the Dynasty ProAudio PX2 Preamplifier, displaying analog and digital input/output ports.
The rear panel features a comprehensive array of analog inputs (Phono, Aux1, Aux2, CD/DVD, Tape Play), analog outputs (Tape Rec, Main Out, X-Over, Sub Mono), digital inputs (Optical, USB), a ground terminal, and a trigger output. The power input with voltage selector is also located here.
5. Setup
5.1 Konnessjonijiet
Image: A detailed connection diagram illustrating how to connect various audio sources and outputs to the PX2 preampaktar ħaj.
The PX2 offers extensive connectivity options:
- Input Analog: Connect up to 4 RCA line inputs for devices like CD players, tuners, or network audio players. A dedicated RCA Phono input with RIAA preamp and ground terminal is available for turntables.
- Inputs Diġitali: Use the S/PDIF (Optical) input for connecting TVs or other digital audio devices. The USB DAC accepts digital audio from a computer or other USB-supported digital audio source, supporting standard stereo PCM digital audio.
- Input tal-mikrofonu: A front-panel 1/4” phone jack supports microphone input with a low-noise mic preamp.
- Ħruġ tal-headphones: A front-panel 1/4” phone jack provides a stereo headphone output.
- Outputs: The PX2 provides Full Range Stereo, X-Over, Sub Mono, and Stereo Headphone outputs for flexible system integration.
5.2 Immuntar fuq Rack
The PX2 features a 1U rack-mountable design with removable feet. It can be used in a standard audio rack, on a table, or on a shelf, providing flexible placement options for any audio system.
6. Istruzzjonijiet Operattivi
6.1 Power On/Off
Press the Power button on the front panel to turn the unit on or off.
6.2 Għażla tas-Sors
Use the Source Select buttons on the front panel to choose between connected inputs (Bluetooth, Optical, USB DAC, Aux1, Aux2, CD/DVD, Phono, Tape).
6.3 Kontroll tal-Volum
Adjust the Master Volume knob to control the overall output level. Individual input levels can be fine-tuned using the respective level controls.
6.4 Kontrolli tat-Ton
Utilize the Bass, Mid, and Treble knobs to adjust the frequency response to your preference. The Loudness control can be engaged for enhanced low-frequency response at lower volumes. The Low Filter button activates a low-cut crossover to optimize sound when using a subwoofer.
6.5 Operazzjoni Bluetooth
Image: A diagram highlighting the features of the Qualcomm Bluetooth 5.3 chip, including improved transmission speed, effective distance, and connection stability.
To pair a Bluetooth device, select the Bluetooth input and press the Pairing button. Fittex għal 'Dynasty ProAudio PX2' on your device and connect. The PX2 features a Qualcomm® aptX™ Lossless Bluetooth 5.3 chipset for high-speed transmission, stable connections, and RF anti-interference.
6.6 Tħaddim tad-DAC tal-USB
Connect your computer or other digital audio source to the USB DAC input. The PX2 supports standard stereo PCM digital audio, allowing you to access audio stored on a thumb drive or stream from your computer.
6.7 Użu tal-Mikrofonu
Plug a 1/4” microphone into the front panel Mic In jack. Adjust the Mic Level knob to control the microphone's volume. The low-noise microphone preamp ensures clear sound.
7. Manutenzjoni
- Naddaf l-unità b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif likwidi.
- Żomm l-unità ħielsa mit-trab u l-fdalijiet.
- Kun żgur li l-konnessjonijiet kollha huma siguri u ħielsa mill-korrużjoni.
8 Issolvi l-problemi
- Ebda Ħsejjes: Check all cable connections, ensure the correct input source is selected, and verify that the volume is not muted or set too low.
- Ħoss Mgħawġ: Check input levels for clipping, ensure cables are securely connected, and try adjusting tone controls.
- Kwistjonijiet ta' Konnettività Bluetooth: Ensure the PX2 is in pairing mode, your device's Bluetooth is on, and there are no obstructions between the devices. Try unpairing and re-pairing.
- Humming/Noise: Ensure proper grounding for turntables. Check for loose connections or interference from other electronic devices.
9. Speċifikazzjonijiet
| Karatteristika | Valur |
|---|---|
| Dimensjonijiet tal-Prodott | 17 x 8.8 x 1.12 pulzieri |
| Piż tal-oġġett | 6.4 liri |
| Numru tal-Mudell tal-Oġġett | PX2 |
| Verżjoni Bluetooth | 5.3 with Qualcomm® aptX™ Lossless |
| Inputs | 4 RCA Line, 1 RCA Phono, 1 S/PDIF (Optical), 1 USB DAC, 1/4” Mic In |
| Outputs | Full Range Stereo, X-Over, Sub Mono, 1/4” Stereo Headphone |
| Ekwalizzazzjoni | 3-band EQ (Bass, Mid, Treble), Loudness, Low-cut Crossover |
| Disinn | 1U Rack-mountable with removable feet |
10. Garanzija u Appoġġ
For warranty information and technical support, please refer to the documentation included with your product or visit the official DYNASTY PROAUDIO websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.
11. Related Product Videos (Seller Content)
AIYIMA T1 PRO Tube Preamplifier Fuqview
Dan il-video jipprovdi overview of the AIYIMA T1 PRO Tube Preamplifier, wirjaasing its features and design. While not the exact PX2 model, it demonstrates a similar product type from a seller, offering insights into preamp funzjonalitajiet.
Fosi Audio P4 Mini Preamp Fuqview
An fuqview of the Fosi Audio P4 Mini Preamp, highlighting its features and connectivity. This video from a seller offers a look at a comparable preampprodott lifier.
Ibbilanċjat Preamp for Home Audio Setup
This video demonstrates a balanced preamp for home audio, suitable for 2-channel stereo and 2.1 setups. It provides context on how preamps integrate into a home audio system.
Douk Audio T8 Multi-Band EQ Tube Preamp
A brief look at the Douk Audio T8 Multi-Band EQ Tube Preamp, an XLR equalizer. This video showcases a preamp with equalization features, relevant to the PX2's capabilities.
Miter tal-VU Fosi Audio LC30 Amplifier Introduction
This video introduces the Fosi Audio LC30 VU Meter Amplifier, providing a detailed look at its design and functionality. It offers a comprehensive view of a related audio component.
Nobsound EQ9 HiFi 9-Band Stereo EQ Preamp
An fuqview of the Nobsound EQ9 HiFi 9-Band Stereo EQ Preamp, an analog equalizer. This video highlights equalization capabilities found in preampliifikaturi.
