RADIOMASTER Pocket Hall Gimbal Transmitter User Manual

1. Introduzzjoni

This manual provides essential information for the safe and efficient operation of your RADIOMASTER Pocket Hall Gimbal Transmitter. Please read this manual thoroughly before use to ensure proper setup and functionality.

2. Informazzjoni dwar is-Sigurtà

Always refer to the instruction manual before use.

• Ensure batteries are correctly installed and charged before operation.
• Operate the transmitter in a safe environment, away from obstacles and people.
• Tesponix l-apparat għall-ilma jew temperaturi estremi.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Iċċekkja regolarment għal kwalunkwe ħsara jew konnessjonijiet laxki.

3. X'hemm fil-Kaxxa

Malli tiftaħ il-kaxxa, ivverifika li l-komponenti kollha huma preżenti:

• 1 x RADIOMASTER Pocket Radio
• 1 x Custom Carry Pouch
• 1 x Cable USB-C
• 1 x Screen Protector
• 1 x Stiker
• (Optional: 4 x Low Tension Springs - if included in your package)

Image: All items included in the RADIOMASTER Pocket package, including the radio, carry pouch, USB-C cable, screen protector, and sticker sheet.

4. Prodott Aktarview

The RADIOMASTER Pocket is a compact and lightweight remote control transmitter designed for various RC applications. It features Hall Gimbals for precise control and runs on EdgeTX firmware.

4.1 Quddiem View

Immaġni: Quddiem view of the RADIOMASTER Pocket transmitter in charcoal, showing the gimbals, LCD screen, and control buttons.

Image: The RADIOMASTER Pocket transmitter showcasing its built-in LED lights, which visualize inputs and enhance visibility.

4.2 Wara View

Immaġni: Wara view of the RADIOMASTER Pocket transmitter, highlighting the battery compartments and external module bay.

4.3 Karatteristiċi ewlenin

• Hall Effect Gimbals: Provide smooth centering and precise response.
• Removable Stick Ends: Għal ħażna u trasport konvenjenti.
• Foldable Antenna: Keeps the antenna protected and out of the way when not in use.
• Skrin LCD backlit: Offers a clear display of settings and telemetry.
• Dwal LED inkorporati: Visualize inputs and add a stylish element.
• External Module Bay: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer.
• 18650 Kompatibilità tal-Batterija: Uses two 18650 batteries for extended operation (batteries not included).

Image: Visual representation of the removable stick ends, foldable antenna, and Hall Gimbal features.

Immaġni: Dettaljata view of trim buttons, 18650 battery compartments, built-in LED lights, and the external Nano module bay.

4.4 Control Layout Diagram

Image: An annotated diagram illustrating the various buttons, switches, ports, and gimbal adjustment points on the transmitter.

• Left Gimbal: Controls throttle and yaw (Mode 2).
• Right Gimbal: Controls pitch and roll (Mode 2).
• Switches (SA, SB, SC, SD, SE, SF): Programmable 2-position and 3-position switches.
• Buttons (RTN, PAGE>, PAGE<, TELE, SYS, MDL): Navigation and system control buttons.
• Buttuni tat-Trim: For fine-tuning channel adjustments.
• Port USB-C: Għall-iċċarġjar u l-konnessjoni tad-dejta.
• DSC Trainer Port: For trainer functionality.
• Jack tal-headphones ta' 3.5mm: Għall-output tal-awdjo.
• External Module Bay: For adding compatible external modules.

5. Setup

5.1 Installazzjoni tal-batterija

1. Open the battery compartments on the rear of the transmitter.
2. Insert two 18650 Li-ion batteries, ensuring correct polarity.
3. Agħlaq il-kompartimenti tal-batterija sew.

5.2 Tixgħel Inizjali

1. Ensure the antenna is in the upright position.
2. Agħfas u żomm il-buttuna tal-qawwa sakemm l-iskrin jixgħel.
3. The transmitter will boot into the EdgeTX firmware.

5.3 Gimbal Adjustment

The gimbals can be adjusted for tension and self-centering. Refer to the diagram in Section 4.4 for adjustment screw locations.

• A (I-R): Turn clockwise to disable self-centering (throttle), counter-clockwise to enable self-centering.
• B (Throttle Tension): Turn clockwise to increase stick tension, counter-clockwise to decrease tension.
• C (Up-Down Tension): Turn clockwise to increase vertical stick tension, counter-clockwise to decrease tension.
• D (Left-Right Tension): Turn clockwise to increase horizontal stick tension, counter-clockwise to decrease tension.

6. Istruzzjonijiet Operattivi

6.1 EdgeTX Firmware

The RADIOMASTER Pocket comes pre-installed with EdgeTX firmware, offering extensive customization and functionality. For detailed instructions on navigating EdgeTX menus, model setup, and binding procedures, please refer to the official EdgeTX documentation available online.

6.2 Using the External Module Bay

The external module bay allows for compatibility with various Nano-size modules, such as TBS Nano Crossfire or Nano Tracer. To install a module:

1. Kun żgur li t-trasmettitur ikun mitfi.
2. Carefully insert the Nano module into the external module bay on the rear of the transmitter.
3. Power on the transmitter and configure the module settings within EdgeTX.

6.3 Iċċarġjar

Connect the included USB-C cable to the USB-C port on the transmitter and to a suitable USB power source (e.g., computer, wall adapter). The charging indicator will show the charging status.

7. Manutenzjoni

• Keep the transmitter clean and free from dust and debris.
• Aħżen f'post frisk u niexef meta ma tkunx qed tuża.
• Avoid dropping or subjecting the transmitter to harsh impacts.
• Periodically check all switches and gimbals for smooth operation.
• Ensure the foldable antenna mechanism operates freely.

8 Issolvi l-problemi

• It-trasmettitur ma jixgħelx:
  • Check if 18650 batteries are correctly installed and fully charged.
  • Kun żgur li l-buttuna tal-qawwa hija ppressata u miżmuma biżżejjed.
• No signal to receiver:
  • Verify the binding procedure between the transmitter and receiver.
  • Check the external module (if used) for proper installation and configuration.
  • Ensure the antenna is fully extended.
• Gimbals or switches not responding:
  • Check settings within EdgeTX firmware.
  • Inspect for any physical obstructions or damage.
• Firmware issues (e.g., "No Drivers or Firmware" message):
  • Connect the transmitter to a computer via USB-C.
  • Visit the official RADIOMASTER or EdgeTX website for firmware update instructions and necessary drivers.
  • Follow the provided guides carefully to re-flash or update the firmware.

9. Speċifikazzjonijiet

Image: Technical drawing showing the dimensions of the RADIOMASTER Pocket transmitter.

10. Vidjo Uffiċjali tal-Prodott

Ara dan il-filmat uffiċjali għal viżwal aktar 'il fuqview of the RADIOMASTER Pocket Hall Gimbal Transmitter's features and design.

11. Garanzija u Appoġġ

For warranty information, technical support, or further assistance, please visit the official RADIOMASTER webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Official RADIOMASTER Store: RADIOMASTER Store on Amazon