Manwal tal-Istruzzjonijiet tal-Kaxxa tal-PC COUGAR Airface ECO RGB Mid-Tower ATX

Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your COUGAR Airface ECO RGB Mid-Tower ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance of your system.

Immaġni: Quddiem-lemin view of the COUGAR Airface ECO RGB Mid-Tower ATX PC Case, showcasing its perforated front panel and an illuminated rear fan.

Setup u Installazzjoni

Follow these steps for assembling your PC components within the COUGAR Airface ECO RGB case.

1. Tneħħija tal-kaxxa u Tħejjija

• Neħħi l-kaxxa mill-imballaġġ tagħha bir-reqqa.
• Inspect the case for any shipping damage.
• Poġġi l-kaxxa fuq wiċċ stabbli u ċatt.

2. Aċċess għall-Intern

The COUGAR Airface ECO RGB features a removable top panel and detachable front bracket for simplified access during assembly.

Immaġni: Ritratt mill-ajru view of the case interior with the top panel removed, illustrating the spacious design for component installation.

3. Installazzjoni tal-Motherboard

• Install the necessary standoffs for your ATX motherboard.
• Poġġi l-motherboard bir-reqqa fil-kaxxa, billi tallinjaha mal-istandoffs u l-I/O shield.
• Sikura l-motherboard bil-viti.

4. Installazzjoni tas-sewqan

The case supports up to two 2.5" SSD drives and two 3.5" HDD drives.

• Locate the designated mounting points for 2.5" SSDs and 3.5" HDDs.
• Secure your storage drives using the provided hardware.

Immaġni: Interna view highlighting the mounting locations for two 2.5-inch SSDs and two 3.5-inch HDDs.

5. Installazzjoni tal-Karta tal-Grafika (GPU)

The Airface ECO RGB accommodates a maximum GPU length of 390mm and supports both horizontal and vertical mounting.

• For horizontal mounting, insert the GPU into the appropriate PCIe slot on your motherboard and secure it with screws.
• For vertical mounting, utilize the upgraded vertical GPU space. (Note: A PCIe riser cable is typically required for vertical GPU mounting and is sold separately).

Image: The interior of the case displaying a graphics card installed in the vertical mounting position.

6. Sistema ta 'tkessiħ

The case comes with two pre-installed 180mm PWM front cooling fans and one 120mm PWM rear fan. It also supports additional air and water cooling solutions.

Immaġni: A li tħares minn quddiem view of the case, highlighting the two pre-installed 180mm PWM cooling fans.

7. Cable Management and Front I/O

• Utilize the increased cable routing space behind the motherboard tray to organize cables.
• Connect the modular front I/O cables (USB 3.0, audio, power, reset) to your motherboard. The modular design allows for versatile placement of the front I/O panel.

Immaġni: Tnejn views of the case, demonstrating the flexibility of placing the modular front I/O panel either on the top or bottom of the front panel.

Istruzzjonijiet Operattivi

1. Tixgħel

• Ensure all components are securely installed and cables are properly connected.
• Connect your power supply to a wall outlet.
• Press the power button on the front I/O panel to start your system.

2. Thermodynamic Airflow

The case features coned vents that leverage thermodynamic principles to maximize cooling efficiency. This design channels air more efficiently into the case, maintaining lower internal temperatures.

Image: A visual representation of how coned vents direct airflow into the case for improved cooling.

3. RGB Lighting Synchronization

The built-in LED controller syncs with the motherboard for seamless system-wide lighting synchronization.

• Connect the RGB controller to your motherboard's compatible RGB header.
• Use your motherboard's software to control and synchronize the lighting effects of the pre-installed RGB fans and other compatible components.

Image: The case interior showcasing synchronized RGB lighting on fans and components, alongside a diagram of the LED controller board.

Manutenzjoni

Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-komponenti tal-PC tiegħek.

Tindif tal-Filtru tat-Trab

The Airface ECO RGB features filters on the front, top, and bottom to prevent dust accumulation. Regular cleaning is recommended.

• Filtru tat-Trab ta' Quddiem: This is a quick-slide filter that pulls out without removing the front panel. Gently slide it out, clean with water or a soft brush, and reinsert once dry.
• Filtru tat-Trab ta' Fuq: This filter attaches magnetically. Simply lift it off, clean, and place it back.
• Bottom Dust Filter: This filter slides out from the rear. Clean and reinsert.

Image: A composite image demonstrating the easy removal of the front, top, and bottom dust filters for cleaning.

Tindif Ġenerali

• Use a soft, dry cloth to wipe down the exterior of the case.
• For interior cleaning, use compressed air to remove dust from fans and components. Ensure the system is powered off and unplugged before cleaning.

Issolvi l-problemi

Din it-taqsima tindirizza kwistjonijiet komuni li tista’ tiltaqa’ magħhom.

System Not Powering On

• Iċċekkja l-Konnessjonijiet tal-Enerġija: Ensure the power supply is connected to the wall and switched on. Verify all power cables from the power supply are correctly connected to the motherboard and components.
• Konnetturi tal-Panew ta' Quddiem: Confirm that the power switch cable from the front I/O panel is correctly connected to the motherboard's front panel header. Refer to your motherboard manual for the correct pinout.

Poor Airflow or Overheating

• Filtri tat-Trab: Clean all dust filters as described in the Maintenance section. Clogged filters restrict airflow.
• Operazzjoni tal-Fann: Ensure all case fans (front, rear, and any additional fans) are spinning correctly. Check their power connections.
• Ġestjoni tal-Kejbil: Poor cable management can obstruct airflow. Reorganize cables to allow for unobstructed air movement.

Kwistjonijiet tad-Dawl RGB

• Konnessjoni tal-Kontrollur: Verify the RGB controller is properly connected to both the fans and the motherboard's RGB header.
• Software: Ensure your motherboard's RGB control software is installed and up-to-date.

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information, technical support, or further assistance, please refer to the official COUGAR websit.

• Uffiċjali Websit: https://cougargaming.com/
• Kuntatt tas-Servizz: https://cougargaming.com/contact2/