Informazzjoni Importanti dwar is-Sigurtà
WARNING: This product contains a gas lift mechanism. Always follow the instructions for proper use and assembly to prevent injury. Be cautious of sharp edges during assembly. Do not exceed the maximum weight capacity of 264 lbs. Keep away from heat sources and open flames. Always use the chair on a stable surface.
- Kun żgur li l-viti u l-boltijiet kollha jkunu ssikkati sew qabel l-użu.
- Toqgħodx fuq is-siġġu.
- Avoid placing heavy objects on the chair that could cause instability.
- Regularly inspect the chair for loose parts or damage.
Kontenut tal-Pakkett
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.
- Hbada P2 Ergonomic Office Chair components
- Assembly hardware kit
- Welcome guide (this manual)
Image: Fully assembled Hbada P2 Office Chair in a home office setting.
Istruzzjonijiet ta' Armar
Follow these steps carefully to assemble your Hbada P2 Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Ħoll il-Komponenti: Neħħi l-partijiet kollha mill-imballaġġ bir-reqqa u poġġihom barra.
- Waħħal ir-Roti mal-Bażi: Insert the casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
- Daħħal il-Gass Lift: Poġġi ċ-ċilindru tal-irfigħ tal-gass fit-toqba taċ-ċentru tal-bażi tas-siġġu.
- Arma l-Mekkaniżmu tas-Sedil: Attach the seat mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
- Waħħal Armrests: Waħħal id-dirgħajn mal-kuxxin tas-sedil billi tuża l-viti apposta.
- Qabbad id-Dahar tas-Sedil: Waħħal id-dahar tas-serħan mal-assemblaġġ tas-sedil.
- Mount Seat Assembly to Gas Lift: Poġġi bir-reqqa s-sedil u d-dahar immuntati fuq iċ-ċilindru tal-irfigħ tal-gass.
- Waħħal ir-Rasrest: Slide the headrest into the slots at the top of the backrest.
- Kontroll Finali: Verify all connections are secure and the chair functions correctly.
Image: Diagram illustrating the key dimensions of the Hbada P2 Office Chair.
Istruzzjonijiet Operattivi
Your Hbada P2 Office Chair offers several adjustable features to customize your seating experience.
1. Aġġustament tal-Għoli tas-Sedil
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the seat, or pull it up while standing to raise the seat. Release the lever at the desired height.
2. Funzjoni ta' Mimdud
The chair can recline and lock into three positions: 90° (upright), 110° (relaxed), and 135° (nap). To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and push the lever down to lock it. To return to an upright position, pull the lever up and lean forward.
Image: Illustration showing the 90°, 110°, and 135° reclining angles of the chair.
3. 3D Adjustable Lumbar Support
The lumbar support can be adjusted in height, depth, and width to conform to your lower back. Locate the adjustment controls on the backrest. Adjust the support until it provides optimal comfort and alignment for your spine.
- Aġġustament Għoli: Push the lumbar support up or down.
- Aġġustament tal-Fond: Rotate the knob (if present) or push the support forward/backward.
- Side-to-Side Motion: The lumbar support offers 10° side-to-side motion for dynamic support.
Immaġni: Dettaljata view of the 3D adjustable lumbar support, showing height, depth, and side-to-side adjustments.
4. Serħan tar-Ras Aġġustabbli 2D
The headrest can be adjusted in height and swivel angle. Grasp the headrest and move it up or down to your preferred height. It also swivels 40° to provide neck support.
Image: Close-up of the 2D adjustable headrest, highlighting its height and swivel capabilities.
5. Aġġustament tad-Dirgħajn
The armrests are height-adjustable with a 7.5 cm (approximately 3 inches) range. Locate the button or lever on the side of each armrest. Press it and move the armrest up or down to your desired height. Release the button/lever to lock it in place.
Immaġni: View of the armrest, indicating the mechanism for height adjustment.
Manutenzjoni
Proper maintenance ensures the longevity and optimal performance of your Hbada P2 Office Chair.
- Tindif:
- For mesh and fabric surfaces, use a soft cloth dampened with mild soap and water. Avoid harsh chemicals.
- For plastic and metal parts, wipe with a clean, damp drapp.
- Do not saturate the chair with water.
- Spezzjoni: Iċċekkja l-viti u l-boltijiet kollha perjodikament biex tiżgura li huma ssikkati. Erġa' ssikkahom jekk meħtieġ.
- Xandara: Keep casters clean from hair and debris to ensure smooth movement.
- Lift tal-gass: Do not attempt to disassemble or repair the gas lift cylinder yourself. Contact customer service if it malfunctions.
Image: Diagram illustrating the layered construction of the elastic foam seat cushion.
Issolvi l-problemi
If you encounter any issues with your Hbada P2 Office Chair, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Is-siġġu ma jaġġustax l-għoli | Ħsara fil-lift tal-gass jew il-lieva mhux attivata. | Ensure the height adjustment lever is fully engaged. If the issue persists, contact customer service. |
| Is-siġġu jitbandal jew mhux stabbli | Viti maħlula jew assemblaġġ irregolari. | Check and tighten all assembly screws. Ensure the chair is on a flat, stable surface. |
| Ir-roti ma jdurux bla xkiel | Debris maqbud fir-roti. | Clean any hair, dust, or debris from the caster wheels. |
| Id-dahar tas-serħan ma jimteddx jew ma jissakkarx | Recline mechanism not engaged or damaged. | Ensure the recline lever is fully engaged. If the mechanism is stuck, try gently rocking the chair while adjusting. Contact customer service if it remains unresponsive. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Hbada |
| Numru tal-Mudell | P2 |
| Kulur | Abjad |
| Għoli Ġenerali | 105.5 - 126.5 ċm (41.5 - 49.8 pulzier) |
| Wisa' tal-Bażi | 70 ċm (27.6 pulzieri) |
| Wisa' tas-Sedil | 51 ċm (20.1 pulzieri) |
| Fond tas-Sedil | 52 ċm (20.5 pulzieri) |
| Firxa tal-Għoli tas-Sedil | 40 - 48 ċm (15.7 - 18.9 pulzier) |
| Piż tal-oġġett | 43 liri |
| Lura Stil | Dahar tal-malja |
| Imla Materjal | Fowm tal-memorja |
| Pożizzjonijiet Reclining | 3 (90°, 110°, 135°) |
| Appoġġ Lumbari | 3D Adjustable (Height, Depth, Width, 10° Side-to-Side Motion) |
| Serħan tar-ras | 2D Adjustable (Height, 40° Swivel) |
| Armrests | Height Adjustable (7.5 cm / 3 inches range) |
| Kapaċità massima tal-piż | 264 lbs |
Garanzija u Appoġġ għall-Klijent
Your Hbada P2 Ergonomic Office Chair comes with a comprehensive warranty and dedicated customer support.
- Garanzija: This product is covered by a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
- Ritorni: A 30-day free return policy is available.
- Tqabbil tal-Prezzijiet: A 15-day price match guarantee is offered.
- Servizz tal-Klijent: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Hbada customer service. Refer to the welcome guide or the official Hbada websit għad-dettalji tal-kuntatt.
