roborock Q10 X5+ Robot Vacuum and Mop User Manual

Prodott Overview

The roborock Q10 X5+ is an advanced robot vacuum and mop designed for comprehensive floor cleaning. It features powerful suction, intelligent navigation, and a convenient self-emptying dock for a hands-free cleaning experience.

The roborock Q10 X5+ robot vacuum, its auto-empty dock, and a smartphone displaying the companion app.

X'hemm fil-Kaxxa

• Vacuum cleaner robotiku (1)
• Baċir li Jbattal Awtomatikament (1)
• Modulu tal-Mopp (1)
• Mopp (1)
• Kurdun tal-Enerġija (1)
• Moisture-Proof Mat (1)
• Manwal għall-Utent (1)
• Gwida għall-Bidu Mgħaġġel (1)

Gwida ta' Setup

1. Initial Setup and Dock Placement

Unpack all components and remove any protective films. Place the Auto-Empty Dock on a hard, level surface against a wall, ensuring there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front for optimal robot navigation and docking.

The Auto-Empty Dock, capable of holding up to 7 weeks of dust with its 2.7L dust bag.

Connect the power cord to the dock and plug it into a power outlet. Place the robot vacuum on the charging contacts of the dock to begin charging. Download the Roborock app from your smartphone's app store and follow the in-app instructions to connect your robot.

2. Dustbin and Water Tank Installation

The robot comes with an integrated dustbin. For mopping functionality, ensure the water tank is filled with clean water. The water tank is located under the top cover of the robot. Open the cover, remove the water tank, fill it, and reinsert it securely.

3. Mop Pad Attachment

Attach the mop pad to the mop module. The mop module then slides into the designated slot at the rear underside of the robot. Ensure it clicks into place securely.

Istruzzjonijiet Operattivi

1. Navigazzjoni u Evitar tal-Ostakli

The roborock Q10 X5+ utilizes PreciSense LiDAR Navigation to map your home quickly and efficiently, planning optimal cleaning paths. Its Reactive Tech Obstacle Avoidance system helps the robot identify and steer clear of common household items like furniture, cables, shoes, and stairs, reducing the need for pre-cleaning tidying.

The robot uses Reactive Tech to detect and avoid obstacles like slippers and pillows.

2. Modi ta 'tindif

The robot supports multiple cleaning modes:

• Vakwu Biss: Provides powerful 10,000 Pa HyperForce suction for deep cleaning carpets and hard floors.
• Mopp Biss: Uses the electronic water tank to wet the mop pad for light mopping.
• Vacuum & Mop Simultaneously: Cleans and mops in a single pass, saving time. Water flow is adjustable via the app.

The robot vacuum and mop operating simultaneously, showing its ability to handle both dry debris and wet stains.

3. App Control and Smart Features

The Roborock app provides full control over your robot. You can:

• Create and Manage Maps: The robot maps your home, allowing you to define rooms, set No-Go Zones, and create Invisible Walls. It supports multi-level mapping for homes with multiple floors.
• Skeda Tindif: Set specific times for the robot to clean designated areas or your entire home.
• Adjust Suction Power & Water Flow: Customize cleaning intensity based on floor type and cleaning needs.
• Sejbien ta' Tapit: The robot automatically increases suction on carpets and lifts its mop module by 8mm to prevent wetting carpets while mopping.

The robot detects carpet and lifts its mop module to avoid wetting the surface.

Manutenzjoni

Regular maintenance ensures optimal performance and extends the lifespan of your roborock Q10 X5+.

1. Auto-Empty Dock Dust Bag Replacement

The Auto-Empty Dock can hold up to 7 weeks of dust. When the dust bag is full, the app will notify you. Simply pull out the full dust bag from the dock and replace it with a new one. This is a mess-free process.

2. Dustbin Cleaning (Robot)

Although the dock self-empties, it is recommended to periodically check and clean the robot's internal dustbin and filter to ensure no blockages or buildup occur.

3. Tindif tal-Mopp

After each mopping session, remove the mop pad from the mop module and clean it. The mop pad is washable and can be hand-washed or machine-washed. Allow it to air dry completely before reattaching.

4. Tindif tar-Romblu tal-Pinzell

The Dual Anti-Tangle System minimizes hair tangles on the main brush. However, periodically remove the main brush and side brush to check for any tangled hair or debris. Use the cleaning tool provided to cut and remove any wrapped hair.

5. Tindif tal-filtru

The robot features a washable filter. Remove the filter from the dustbin and rinse it under running water. Ensure it is completely dry before reinserting it into the dustbin.

6. Tindif tas-Sensor

Wipe the cliff sensors, wall sensors, and charging contacts on the robot and dock with a soft, dry cloth to ensure proper functionality and navigation.

Issolvi l-problemi

• Ir-robot mhux qed jiċċarġja: Ensure the robot is properly aligned with the charging contacts on the dock. Check if the power cord is securely plugged into the dock and the wall outlet.
• Robot imwaħħal jew mitluf: Clear any obstacles around the robot. If it's in a complex area, consider setting No-Go Zones in the app.
• Ġbid ħażin: Check if the dustbin is full or if the filter is clogged. Clean or replace as necessary. Ensure the main brush is free of tangled hair.
• Moppjar mhux effettiv: Ensure the water tank is filled and the mop pad is properly attached and pre-wetted. Adjust water flow settings in the app.
• Problemi ta' konnettività tal-app: Ensure your Wi-Fi is 2.4GHz (5GHz is not supported). Restart your router, robot, and app.

Speċifikazzjonijiet

Nota: L-ispeċifikazzjonijiet huma soġġetti għal bidla mingħajr avviż.

Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija u appoġġ għall-klijenti, jekk jogħġbok irreferi għar-roborock uffiċjali webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

No official seller videos were found in the provided product data.