1. Introduzzjoni
This manual provides instructions for the setup, operation, maintenance, and troubleshooting of your Kreo IKARUS High Performance Wireless Gaming Mouse. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
2. Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- Kreo IKARUS Wireless Gaming Mouse
- Riċevitur Wireless USB
- Cable tal-Iċċarġjar tal-USB-C
- Manwal għall-Utent (dan id-dokument)
3. Setup
3.1 Iċċarġjar tal-Maws
Before first use, fully charge the mouse. Connect the supplied USB-C charging cable to the mouse's charging port and the other end to a powered USB port on your computer or a USB wall adapter. The LED indicator on the mouse will show charging status and turn off or change color when fully charged.
3.2 Konnessjoni tar-Riċevitur Wireless
- Daħħal ir-riċevitur mingħajr fili USB f'port USB disponibbli fuq il-kompjuter tiegħek.
- Ixgħel il-maws billi tuża s-swiċċ tal-enerġija li jinsab fil-qiegħ tal-maws.
- The mouse should automatically connect to the receiver. If connection is not established, refer to the troubleshooting section.
3.3 Installazzjoni tas-Sewwieq (Mhux obbligatorja)
The Kreo IKARUS mouse is plug-and-play for basic functionality. For advanced customization, including button remapping, macro creation, and detailed DPI settings, download the official Kreo software from the Kreo support websitSegwi l-istruzzjonijiet fuq l-iskrin għall-installazzjoni.
4. It-Tħaddim tal-Maws
4.1 Funzjonijiet Bażiċi
- Ikklikkja Xellug: Azzjoni primarja.
- Ikklikkja bil-lemin: Menù sekondarju ta' azzjoni/kuntest.
- Scroll Wheel: Skrollja 'l fuq/'l isfel, ikklikkja bil-buttuna tan-nofs.
- Buttuni tal-ġenb: Default għal 'il quddiem/lura 'l ġewwa web browsers. Customizable via software.
4.2 Aġġustament DPI
The Kreo IKARUS features a dedicated DPI button (location may vary, typically near the scroll wheel or on the bottom). Press this button to cycle through preset DPI levels. The LED indicator will change color to indicate the current DPI setting. For precise DPI customization up to 26,000 DPI, use the Kreo software.
4.3 Rata tal-Votazzjoni
The mouse supports a 4k Polling Rate, providing rapid response times. This setting can typically be adjusted within the Kreo software to suit your preferences and system capabilities.
5. Manutenzjoni
5.1 Tindif
To clean the mouse, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild cleaning solution. Avoid using harsh chemicals or abrasive materials. Do not allow liquids to enter the mouse's internal components.
5.2 Kura tal-Batterija
- Evita li tiċċarġja l-batterija kompletament ta' spiss.
- Aħżen il-maws f'post frisk u niexef meta ma jkunx qed jintuża għal perjodi twal.
- Use only the provided charging cable or a certified USB-C cable.
6 Issolvi l-problemi
- Il-maws ma jirrispondix:
- Kun żgur li l-maws huwa mixgħul.
- Iċċekkja jekk ir-riċevitur USB huwiex imdaħħal sew f'port USB li jaħdem.
- Erġa' ċċarġja l-batterija tal-maws.
- Ipprova port USB differenti.
- Moviment erratiku tal-cursor:
- Naddaf is-sensorju tal-maws.
- Kun żgur li qed tuża l-maws fuq wiċċ adattat (eż., mouse pad).
- Iċċekkja għal interferenza mingħajr fili minn apparati oħra.
- DPI button not changing settings:
- Ensure the Kreo software is not overriding hardware DPI settings.
- Erġa' ibda l-maws u l-kompjuter.
7. Speċifikazzjonijiet
| Sensor | pixart 3395 |
| Firxa tad-DPI | Sa 26,000 DPI |
| Veloċità tat-Traċċar | 650 FPS |
| Aċċelerazzjoni | 50g |
| Ir-Rata tal-Votazzjoni | 4k (4000 Hz) |
| Konnettività | 2.4 GHz Wireless (Riċevitur USB) |
| Dimensjonijiet (LxWxH) | 12.5 x 5 x 0.1 ċm |
| Piż | 58 g |
8. Garanzija u Appoġġ
8.1 Informazzjoni dwar Garanzija
Kreo products are covered by a limited warranty against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Kreo websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
8.2 Appoġġ għall-Klijent
For technical assistance, troubleshooting, or warranty inquiries, please contact Kreo customer support:
- Email: help@kreo-tech.com
- Telefon: 9611507877
- Websit: www.kreo-tech.com
Manifattur: Lukus Brands Private Limited (Kreo)
Indirizz: Koramangala 4-B Block, Bengaluru, Karnataka 560034
