1. Introduzzjoni
This manual provides essential information for the safe and effective use of your GT POWER AC Adapter, Model 102. This adapter is specifically designed to provide power to the Cadence Blood Pressure Monitor TMB-2092-G. It features built-in protection mechanisms to ensure reliable operation and device safety.
2. Informazzjoni dwar is-Sigurtà
TWISSIJA: Biex tnaqqas ir-riskju ta’ xokk elettriku, nar, jew korriment, dejjem segwi dawn il-prekawzjonijiet bażiċi ta’ sigurtà.
- This adapter is designed for UŻU BISS BISS. Do not expose to rain, moisture, or extreme temperatures.
- Ensure the adapter is connected to a power outlet with the correct voltage as specified on the adapter label.
- Tiżżarmax, timmodifikax, jew tippruvax issewwi l-adapter. Irreferi kull manutenzjoni lil persunal kwalifikat.
- Keep the adapter and its cable away from heat sources, sharp edges, and excessive pressure.
- Unplug the adapter from the power outlet when not in use for extended periods or during electrical storms.
- Do not operate the adapter with a damaged cord or plug.
Figura 1: Quddiem view of the GT POWER AC Adapter. The label indicates "GT Power AC/DC Power Adapter", "MODEL: XED-1230", "INPUT: AC100-240V~50/60Hz", and "OUTPUT: DC". A "CAUTION INDOOR USE ONLY" warning is visible.
3. Setup
- Spezzjona l-Adapter: Before first use, visually inspect the AC adapter and its cable for any signs of damage. Do not use if damaged.
- Qabbad mal-Apparat: Locate the power input port on your Cadence Blood Pressure Monitor TMB-2092-G. Carefully insert the DC output plug of the GT POWER AC Adapter into this port. Ensure a secure connection.
- Qabbad mal-Power Outlet: Plug the two-prong AC input plug of the adapter into a standard wall power outlet (AC 100-240V, 50/60Hz).
- Ivverifika l-Enerġija: Once connected, your blood pressure monitor should receive power. Refer to your blood pressure monitor's manual for specific power indicators.
Figure 2: Close-up of the DC output connector, which plugs into the Cadence Blood Pressure Monitor.
4. Istruzzjonijiet Operattivi
Once properly connected, the GT POWER AC Adapter will continuously supply power to your Cadence Blood Pressure Monitor TMB-2092-G. The adapter is designed for continuous operation within its specified limits.
This adapter incorporates several protection features:
- OVP (Over Voltage Protezzjoni): Safeguards your device from damage due to excessive input voltage.
- OCP (Protezzjoni Over Current): Prevents damage from excessive output current.
- SCP (Protezzjoni minn Ċirkwit Qasir): Automatically shuts down power in case of a short circuit, protecting both the adapter and the connected device.
Figura 3: Ġenb view of the adapter, illustrating the compact design and the attached power cord.
5. Manutenzjoni
- Tindif: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the adapter. Do not use liquid cleaners or aerosols.
- Ħażna: Meta ma tkunx qed tużah, aħżen l-adapter f'post frisk u niexef, 'il bogħod mix-xemx diretta u mill-umdità. Evita li ddawwar il-kejbil issikkat biex tevita l-ħsara.
- Kura tal-Cable: Do not pull on the cable to disconnect the adapter. Always grasp the plug firmly. Avoid placing heavy objects on the cable or bending it sharply.
Figure 4: The 48-inch heavy-duty power cable, designed for durability.
6 Issolvi l-problemi
If you experience issues with your GT POWER AC Adapter, refer to the following common solutions:
- L-ebda Enerġija għall-Apparat:
- Ensure the adapter is securely plugged into both the wall outlet and the blood pressure monitor.
- Iċċekkja jekk is-sokit tal-ħajt hux qed jaħdem billi tqabbad apparat ieħor.
- Inspect the adapter cable and plugs for any visible damage. If damaged, discontinue use.
- L-Adapter Iħoss Sħun:
- It is normal for the adapter to feel slightly warm during operation.
- If the adapter becomes excessively hot, unplug it immediately and discontinue use. This could indicate an internal fault or an overloaded circuit.
- Ħsara fl-apparat:
- If the blood pressure monitor is not functioning correctly even with power, consult the monitor's own instruction manual or contact its manufacturer for support.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | QAWWA GT |
| Numru tal-Mudell | 102 |
| Input Voltage | AC 100-240V, 50/60Hz |
| Tip ta' Output | DC |
| Tul tal-Cable | 48-il pulzier (madwar 1.2 metri) |
| Karatteristiċi Speċjali | Fuq VoltagProtezzjoni minn Kurrent Żejjed (OVP), Protezzjoni minn Kurrent Żejjed (OCP), Protezzjoni minn Ċirkwit Qasir (SCP) |
| Sors tal-Enerġija | Corded Elettriku |
| Piż tal-oġġett | 0.4 Libbra (madwar 181 gramma) |
| Dimensjonijiet tal-Pakkett | 8 x 4.5 x 1.5 pulzieri |
| UPC | 781834739976 |
8. Garanzija u Appoġġ
Your GT POWER AC Adapter Model 102 comes with the following:
- 30 Jum Garanzija ta' Money Back: Jekk m'intix sodisfatt bix-xiri tiegħek, tista' tirritornah fi żmien 30 jum għal rifużjoni sħiħa.
- Sena ta 'Garanzija: This product is covered by a one-year warranty against manufacturing defects from the date of purchase.
For technical support or warranty claims, please contact your retailer or the manufacturer, GTPOWER, directly. Please have your purchase information and product model number (102) available.
