Manwal tal-Utent tal-Aeratur u l-Skarifikatur Elettriku FUXTEC FX-EV360

1. Introduzzjoni

This manual provides essential instructions for the safe and effective operation, assembly, and maintenance of your FUXTEC FX-EV360 Electric Aerator and Scarifier. Please read this manual thoroughly before using the appliance to ensure proper function and to prevent injury or damage. Keep this manual in a safe place for future reference.

The FUXTEC FX-EV360 is designed to improve the health and appearance of your lawn by removing moss, thatch, and dry debris. It features a powerful 1500W motor, a 36 cm working width, and 5 adjustable depth levels for versatile lawn care.

2. Istruzzjonijiet tas-Sigurtà

Twissijiet ta' Sigurtà Ġenerali:

• Always wear appropriate personal protective equipment (PPE) such as safety glasses, sturdy footwear, and hearing protection when operating the machine.
• Ensure the work area is clear of stones, sticks, wires, and other debris that could be thrown by the machine.
• Żomm it-tfal, l-annimali domestiċi, u l-persuni fil-qrib f'distanza sigura (mill-inqas 5-il metru) miż-żona tal-operazzjoni.
• Never operate the machine in wet conditions or rain.
• Before performing any maintenance, cleaning, or when leaving the machine unattended, always disconnect it from the power supply.
• Inspect the power cord regularly for damage. If damaged, have it replaced by a qualified electrician.
• Tużax il-magna jekk xi partijiet huma bil-ħsara jew nieqsa.
• Tħaddem il-magna biss fid-dawl tal-jum jew dawl artifiċjali tajjeb.
• Always maintain a firm grip on the handles and walk, do not run, while operating the machine.

Sigurtà Elettrika:

• Tiżgura l-provvista tal-enerġija voltage matches the rating on the machine's label.
• Use only extension cords suitable for outdoor use and rated for the machine's power consumption.
• Do not abuse the cord. Never carry the machine by the cord or yank it to disconnect from the outlet.
• Żomm il-korda 'l bogħod mis-sħana, żejt, truf li jaqtgħu, jew partijiet li jiċċaqilqu.

3. Prodott Aktarview

The FUXTEC FX-EV360 is an electric aerator and scarifier designed for efficient lawn maintenance.

Figura 1: Quddiem view of the FUXTEC FX-EV360 Electric Aerator and Scarifier.

Figura 2: Angolat view of the FUXTEC FX-EV360, highlighting the handle and collection bag.

Figura 3: In-naħa ta’ taħt view showing the roller mechanism and depth adjustment lever.

Figure 4: Close-up of the interchangeable roller with tines for scarifying or aerating.

Komponenti Ewlenin:

• Djar tal-Mutur: Fih il-mutur elettriku ta' 1500W.
• Manubriju: Ergonomic design with quick-release clamps for easy adjustment and storage.
• Operating Switch: Power control for the motor.
• Lieva tal-Aġġustament tal-Fond: Allows selection of 5 working depth levels.
• Borża tal-Ġbir: 45-liter capacity for collecting removed debris.
• Rombli: Interchangeable rollers for scarifying (blades) and aerating (spring tines).
• Roti: For easy maneuverability across the lawn.

4. Setup u Assemblea

The FUXTEC FX-EV360 is designed for straightforward assembly. Follow these steps:

1. Spakkjar: Neħħi l-komponenti kollha mill-imballaġġ bir-reqqa. Iċċekkja għal xi ħsara jew partijiet neqsin.
2. Assemblaġġ tal-manubriju: Attach the lower handlebar sections to the main unit. Secure them using the provided screws or quick-release clamps. Then, attach the upper handlebar section, ensuring the operating switch and cable are correctly positioned and secured.
3. Roller Installation: The unit typically comes with one roller pre-installed. If you need to change the roller (e.g., from scarifier to aerator), refer to the "Roller Replacement" section in Maintenance. Ensure the chosen roller is securely fastened before operation.
4. Collection Bag Attachment: Hook the 45-liter collection bag onto the designated points at the rear of the machine. Ensure it is securely attached to prevent debris from escaping.
5. Ġestjoni tal-Kejbil: Secure the power cable along the handlebar using the provided clips to prevent it from interfering with operation or getting damaged.

Note: While assembly is generally intuitive, always refer to the detailed diagrams in the printed manual for precise steps.

5. Istruzzjonijiet Operattivi

Before starting, ensure all safety instructions have been read and understood.

1. Preparazzjoni:
   • Clear the lawn of any obstacles like stones, toys, or branches.
   • Mow the lawn to a short height (e.g., 2-3 cm) before scarifying or aerating for best results.
   • Ensure the lawn is dry. Operating on wet grass can clog the machine and reduce effectiveness.
2. Selecting Working Depth:
   • The FUXTEC FX-EV360 offers 5 adjustable depth levels, ranging from -12 mm to +10 mm.
   • Use the depth adjustment lever, typically located on the side of the machine, to select the desired depth.
   • For initial scarifying, start with a shallower depth and gradually increase if needed. For aeration, a deeper setting might be appropriate.
   • The '+' settings are for raking (light dethatching), while the '-' settings are for scarifying (deeper cutting).
3. Jibda l-Magni:
   • Connect the machine to a suitable power outlet.
   • Press and hold the safety button (if present) and then squeeze the operating lever on the handlebar to start the motor.
   • The motor will start immediately.
4. Operazzjoni:
   • Push the machine forward at a steady, moderate pace. Avoid pushing too fast, which can reduce effectiveness, or too slow, which can overload the motor.
   • Overlap each pass slightly to ensure complete coverage of the lawn.
   • Empty the 45-liter collection bag regularly to maintain optimal performance and prevent clogging.
   • When turning, release the operating lever to stop the motor, lift the front of the machine slightly, pivot, and then restart.
5. Twaqqaf il-Magni:
   • Itlaq il-lieva tat-tħaddim biex twaqqaf il-mutur.
   • Wait for the roller to come to a complete stop before moving away from the machine or performing any tasks.
   • Always disconnect the power cord after use.

6. Manutenzjoni u Ħażna

Regular maintenance ensures the longevity and optimal performance of your FUXTEC FX-EV360.

1. Tindif:
   • After each use, disconnect the power supply.
   • Clean the machine thoroughly, especially the roller and the underside of the housing, to remove grass, soil, and debris. Use a brush or a damp drapp. Tużax ġettijiet tal-ilma jew apparat tat-tindif bi pressjoni għolja.
   • Kun żgur li l-fetħiet tal-ventilazzjoni huma ħielsa mill-fdalijiet.
   • Clean the collection bag as needed.
2. Sostituzzjoni tar-rombli:
   • Skonnettja l-provvista tal-enerġija.
   • Carefully tilt the machine to access the underside.
   • Locate the roller retention mechanism (e.g., bolts, clips).
   • Remove the current roller and install the desired roller (scarifier or aerator), ensuring it is correctly seated and secured.
   • Always ensure the roller is firmly attached before resuming operation.
3. Ħażna:
   • Naddaf il-magna sewwa qabel ma taħżinha.
   • Aħżen il-magna f'post niexef u ventilat sew, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
   • The handlebar can be folded using the quick-release clamps for compact storage.
   • Żomm fejn ma jintlaħaqx mit-tfal.
4. Spezzjoni:
   • Regularly inspect the rollers for wear or damage. Replace worn or damaged rollers immediately.
   • Iċċekkja l-viti u l-qafliet kollha għal issikkar.
   • Inspect the power cord for any cuts, abrasions, or signs of damage.

7 Issolvi l-problemi

This section addresses common issues you might encounter. For problems not listed here, contact FUXTEC customer support.

8. Speċifikazzjonijiet Tekniċi

9. Garanzija u Appoġġ

FUXTEC products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official FUXTEC websit.

For technical assistance, spare parts, or service inquiries, please contact FUXTEC customer support.

• Manifattur: FUXTEC
• Appoġġ: Refer to your purchase documentation or the FUXTEC official websit għad-dettalji tal-kuntatt.