VEVOR 72-inch Ceiling Fan with Light Instruction Manual
Brand: VEVOR | Model: FR25050L-72"ORB
Introduzzjoni
This manual provides detailed instructions for the safe installation, operation, and maintenance of your VEVOR 72-inch Ceiling Fan with Light. This modern low-profile flush mount fan features two-tone plywood blades, a 24W energy-efficient LED light with three adjustable color temperatures (3000K, 4000K, 6500K), and a reversible DC motor suitable for all seasons. It operates with a multifunctional remote control, offering 6 fan speeds and timer settings. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Informazzjoni dwar is-Sigurtà
TWISSIJA: To reduce the risk of fire, electric shock, or personal injury, observe the following:
- L-installazzjoni għandha ssir minn elettriċista kwalifikat.
- Disconnect power at the circuit breaker before installing or servicing the fan.
- Il-wajers kollha għandhom ikunu skont il-kodiċijiet elettriċi nazzjonali u lokali.
- The mounting bracket must be securely fastened to a building structure capable of supporting the fan's weight.
- Ensure the fan blades are installed at a minimum distance of 7 feet (2.1 meters) from the floor.
- Do not operate the fan without the blades properly installed.
- Evita li tpoġġi oġġetti fil-mogħdija tax-xfafar tal-fann.
- Tużax il-fann b'dimmer switch li mhux iddisinjat speċifikament għal fannijiet tas-saqaf.
Kontenut tal-Pakkett
Verify all components are present and undamaged before beginning installation.
- 1x VEVOR 72-inch Ceiling Fan Motor with LED Light
- 8x Two-Tone Plywood Fan Blades
- 1x Remote Control (Mounting Bracket Included, Batteries Not Included)
- 1x 6-inch Downrod
- 1x 10-inch Downrod
- 1x 20-inch Downrod
- 1x Bracket tal-Immuntar
- 1x Canopy
- 1x Yoke Cover
- Hardware Pack (screws, wire nuts, cotter pins)
- Manwal ta' Istruzzjoni
Figure 1: All components included in the VEVOR 72-inch Ceiling Fan package.
Setup u Installazzjoni
Follow these steps for proper installation of your ceiling fan. Ensure power is disconnected at the circuit breaker before starting.
1. Installazzjoni tal-Bracket tal-Immuntar
- Secure the mounting bracket to a ceiling joist or a suitable electrical junction box capable of supporting the fan's weight.
- Ensure the bracket is firmly attached using appropriate screws and washers.
Figure 2: The mounting bracket and various downrod lengths provided for different ceiling heights.
2. Assemblea Downrod
- Select the appropriate downrod length (6, 10, or 20 inches) for your ceiling height.
- Feed the fan's electrical wires and safety cable through the chosen downrod.
- Attach the downrod to the fan motor housing, securing it with the provided pin and cotter pin.
- Slide the canopy and yoke cover onto the downrod.
3. Konnessjonijiet tal-Wiring
- Carefully connect the fan's wires to the household wiring according to the wiring diagram in the manual (typically black to black, white to white, and green/ground to ground).
- Kun żgur li l-konnessjonijiet kollha huma siguri bl-użu ta' ġewż tal-wajer.
- Connect the remote control receiver to the fan's wiring harness.
4. Iddendel il-Fan
- Carefully lift the fan assembly and place the downrod ball into the mounting bracket.
- Ensure the safety cable is also secured to the building structure.
- Żerżaq il-kanupew 'il fuq sas-saqaf u waħħalha mal-bracket tal-immuntar bil-viti pprovduti.
5. Twaħħil tax-Xfafar tal-Fann
- Attach each of the 8 fan blades to the motor housing using the provided screws.
- Kun żgur li l-viti kollha huma ssikkati sew.
6. Installing LED Light and Cover
- Connect the LED light assembly's quick connector to the corresponding connector in the fan's motor housing.
- Secure the LED light assembly to the fan.
- Twist the light cover onto the LED light assembly until it is firmly in place.
Istruzzjonijiet Operattivi
Your VEVOR ceiling fan is operated using the included multifunctional remote control.
Figure 3: The multifunctional remote control for the VEVOR 72-inch Ceiling Fan.
1. Power On/Off
- Press the power button (usually a red circle with a line) to turn the fan and light on or off.
- The fan will remember the last settings for speed and light mode when turned back on via a wall switch.
2. Kontroll tal-veloċità tal-fann
- Use the '+' and '-' buttons under the fan icon to increase or decrease the fan speed (6 speeds available).
- The fan operates quietly, even at higher speeds, providing up to 11,000 CFM airflow.
3. Kontroll tad-Dawl
- Press the light bulb icon to turn the LED light on or off.
- Use the '+' and '-' buttons under the light bulb icon to dim or brighten the light.
- Press the 'C' button to cycle through the three color temperatures: 3000K (warm yellow), 4000K (natural), and 6500K (cool white).
4. Funzjoni Reversa
- Press the 'R' button to reverse the direction of the fan blades.
- In summer, the fan rotates counterclockwise to create a cooling breeze.
- In winter, it rotates clockwise to circulate warm air near the ceiling, distributing it evenly.
Figure 4: Reversible fan design for optimal air circulation in both summer and winter.
5. Funzjoni Timer
- Press the timer button (clock icon) to set the fan to automatically turn off after 1, 2, 4, or 8 hours.
6. Funzjoni Mute
- Press the 'MUTE' button to silence the remote's beeping sounds when changing settings.
Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-fann tas-saqaf tiegħek.
- Tindif: Neħħi t-trab tax-xfafar tal-fann u l-housing tal-mutur regolarment b'ċarruta ratba,amp drapp. Tużax tindif jew solventi li joborxu.
- Bilanċ tax-Xafra: If the fan wobbles, check that all blade screws are tight and that the blades are properly balanced. A balancing kit may be used if necessary.
- Konnessjonijiet: Periodically check all electrical connections and mounting hardware for tightness.
- Qoxra tad-Dawl: Clean the light cover with a mild, non-abrasive cleaner.
Issolvi l-problemi
Refer to the following common issues and solutions before contacting customer support.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Fan ma jibda | No power to the fan; Loose wiring; Remote control battery low or not paired. | Check circuit breaker; Verify all wire connections; Replace remote battery or re-pair remote. |
| Fan wobbles | Viti tax-xafra maħlula; Xfafar mhux ibbilanċjati; Bracket tal-immuntar maħlul. | Issikka l-viti kollha tax-xafra; Uża kit tal-ibbilanċjar tax-xafra; Kun żgur li l-bracket tal-immuntar huwa sikur. |
| Id-dawl ma jaħdimx | No power to the light; Loose light wire connection; Faulty LED driver. | Check power supply; Verify light wire connections; Contact support for LED driver replacement. |
| Il-kontroll mill-bogħod ma jaħdimx | Dead batteries; Remote not paired; Obstruction between remote and receiver. | Replace batteries; Re-pair remote control (refer to manual for pairing steps); Remove obstructions. |
Speċifikazzjonijiet
Key technical specifications for the VEVOR 72-inch Ceiling Fan with Light:
- Ditta: VEVOR
- Isem tal-Mudell: 72 In Ceiling Fan with Light (FR25050L-72"ORB)
- Numru ta 'xfafar: 8
- Materjal tax-xafra: Two-tone plywood
- Dijametru tal-fann: 72 pulzieri
- Tip ta' Mutur: Mutur DC riversibbli
- Qawwa tal-Mutur: 65W
- Kapaċità tal-fluss tal-arja: Sa 11,000 CFM
- Livell ta' Storbju: ≤45dB
- Numru ta' Veloċitajiet tal-Fann: 6
- Tip ta' Dawl: Integrated 24W LED Light
- Temperaturi tal-Kulur: 3000K (Sħun), 4000K (Naturali), 6500K (Kessaħ)
- Metodu ta' Kontroll: Kontroll mill-bogħod
- Issettjar tat-Timer: 1H, 2H, 4H, 8H
- Użu fuq ġewwa/barra: Ġewwa, Barra
- Piż tal-oġġett: 21.6 Liri
- Dimensjonijiet tal-Prodott: 72.44"D x 72.44"W x 13.39"H
Figure 5: Detailed dimensions and key specifications of the ceiling fan.
Garanzija u Appoġġ
For warranty information, technical support, or any inquiries regarding your VEVOR 72-inch Ceiling Fan, please contact VEVOR customer service. Refer to your purchase documentation for specific warranty terms and conditions.
Servizz tal-Klijent tal-VEVOR: Żur il-VEVOR uffiċjali webis-sit jew irreferi għall-informazzjoni ta' kuntatt ipprovduta fl-imballaġġ tal-prodott tiegħek.
