HASWING Cayman 50700-137B Electric Trolling Motor Instruction Manual

1. Introduzzjoni

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your HASWING Cayman 50700-137B Electric Trolling Motor. Designed for both saltwater and freshwater use, this 12V, 55LB thrust motor features a 54-inch shaft and comes with a remote control for versatile navigation. Please read this manual thoroughly before installation and use.

Figure 1.1: HASWING Cayman 50700-137B Electric Trolling Motor with Remote Control.

2. Setup u Installazzjoni

2.1. Tneħħija tal-kaxxa u Kontroll tal-Komponenti

Iftaħ il-komponenti kollha mill-pakkett bir-reqqa u vverifika mal-lista tal-ippakkjar. Kun żgur li l-partijiet kollha huma preżenti u bla ħsara qabel ma tipproċedi bl-installazzjoni.

2.2. Immuntar tal-Mutur tat-Trolling

The Cayman 50700-137B is a bow-mount trolling motor. Securely attach the motor to the bow of your boat using appropriate hardware. Ensure the mounting surface is strong enough to support the motor's weight and thrust.

Figure 2.1: Detail of the bow mount mechanism.

For a detailed visual guide on installation, refer to the video below:

2.3. Konnessjoni tal-batterija

Connect the motor to a 12V deep cycle battery (1x 105AH recommended). Ensure correct polarity: red to positive (+), black to negative (-). Use appropriate marine-grade connectors and ensure all connections are tight and secure.

Figure 2.2: Control panel showing the LED power display for battery status.

2.4. Installazzjoni tal-Propeller

Install the three-blade propeller onto the motor shaft. Align the drive pin with the shaft hole and the cross-shaped groove of the propeller. Secure it with the provided stainless steel washer and nut. Tighten the nut firmly, but do not overtighten to avoid damage.

Figure 2.3: The three-blade propeller.

2.5. Tqabbil tal-Kontroll mill-bogħod

To pair the 2.4G wireless remote control with the motor:

1. Ensure the motor is connected to the battery and the shaft is vertical.
2. Press and hold the 'Turtle' (speed down) button on the remote and the 'Magnifying Glass' button on the motor's control panel simultaneously for 5 seconds.
3. You will hear three beeps, indicating a successful connection. Release both buttons.

Figure 2.4: The 2.4G wireless remote control with labeled buttons.

For a visual demonstration of the pairing process, watch this video:

3. Istruzzjonijiet Operattivi

3.1. Funzjonijiet ta 'Kontroll mill-bogħod

The wireless remote control allows for precise command of your trolling motor:

• Qawwa ON/OFF: Press the designated button to activate or deactivate the motor.
• Kontroll tal-veloċità: Use the 'Speed Up' and 'Speed Down' buttons for variable speed adjustments.
• Tmexxija: Utilize the 'Turn Left' and 'Turn Right' buttons for directional control. The motor offers 360-degree electric steering.
• Veloċità Sħiħa: A dedicated button provides instant maximum thrust.
• Reboot Key: Use this button to reset the remote connection if needed.

3.2. Aġġustament tal-Fond

The motor features an adjustable depth collar on the cast aluminum alloy shaft. Loosen the collar, adjust the motor to the desired depth, and then securely tighten the collar to prevent movement during operation.

3.3. Stow and Deploy

To deploy the motor, release the latch and carefully lower the motor into the water. To stow, lift the motor out of the water and secure it in the stowed position using the lift handle and latch mechanism.

4. Manutenzjoni

4.1. Kura tal-Iskrun

Regularly inspect the propeller for weeds, fishing line, or damage. Clean the propeller after each use, especially in weedy areas. Replace damaged propellers immediately to maintain efficiency and prevent further motor damage.

4.2. Shaft and Motor Housing

After each use, especially in saltwater, rinse the shaft and motor housing with fresh water to remove salt and debris. Inspect for any signs of corrosion or wear. Apply a marine-grade protective spray if necessary.

4.3. Manutenzjoni tal-batterija

Ensure your 12V deep cycle battery is properly charged before each outing. Store the battery in a cool, dry place when not in use and keep terminals clean and free of corrosion.

5 Issolvi l-problemi

• Il-Mutur Mhux Jirrispondi: Check battery connections, ensure the remote is paired, and verify the battery charge level.
• Remote Not Pairing: Repeat the pairing procedure (Section 2.5). Ensure the remote battery is functional.
• Qawwa/Prestazzjoni Mnaqqsa: Inspect the propeller for obstructions or damage. Check battery voltage u konnessjonijiet.
• Storbju mhux tas-soltu: Immediately stop the motor and inspect the propeller and shaft for any foreign objects or damage.

6. Speċifikazzjonijiet

7. Garanzija u Appoġġ

For warranty information, technical support, or any product-related inquiries, please contact HASWING customer service directly. Refer to the product packaging or the official HASWING webis-sit għad-dettalji ta' kuntatt l-aktar aġġornati.