SmallRig Portable Carbon Fiber Travel Tripod Kit (Model 11758) Instruction Manual

1. Prodott Aktarview

The SmallRig Portable Carbon Fiber Travel Tripod Kit (Model 11758) is designed for photographers and videographers requiring a lightweight, stable, and versatile support system. It features carbon fiber legs, a fluid video head, and the ability to convert into a monopod or be used for low-angle shooting.

Image 1.1: The SmallRig Portable Carbon Fiber Travel Tripod Kit, showcasing its compact design and fluid head.

2. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Tripod x 1
• Video Head x 1
• Short Center Column x 1
• Bag tal-Ħażna x 1

Image 2.1: Visual representation of the tripod and its included accessories, along with basic specifications.

3. Setup u Assemblea

3.1 Kif tiftaħ it-Tripod

1. Poġġi t-tripod fuq wiċċ ċatt u stabbli.
2. Release the leg angle locks on each leg to extend them.
3. Adjust the leg angles to achieve desired stability.
4. Extend the leg sections by releasing the height lever locks and pulling out each section. Securely fasten the locks once the desired height is reached.

3.2 Kif Twaħħal il-Kamera Tiegħek

1. Ensure the quick release plate lock on the fluid head is disengaged.
2. Remove the quick release plate from the fluid head.
3. Attach the quick release plate to the bottom of your camera or camera cage using the 1/4"-20 screw. Ensure it is tightened securely.
4. Slide the camera with the attached quick release plate back into the fluid head.
5. Engage the quick release plate lock to secure the camera.

Immaġni 3.1: Dettaljata view of the fluid video head, highlighting the quick release plate lock, tilt lock, pan lock, and bowl lock.

4. Istruzzjonijiet Operattivi

4.1 Aġġustament tal-Għoli

The tripod offers a flexible height range from 25cm (0.82in) to 158cm (61.8in). To adjust the height:

• Sezzjonijiet tar-riġlejn: Use the height lever locks on each of the 5-section legs to extend or retract them.
• Kolonna taċ-Ċentru: The main center column can be extended for additional height.

Image 4.1: Illustration demonstrating the tripod's adjustable height range, from its lowest to highest extension.

4.2 Pan and Tilt Video Head

The fluid head provides smooth pan and tilt movements for video recording.

• Pan Lock: Rotate the pan lock knob to secure or release the 360° panning movement.
• Tilt Lock: Rotate the tilt lock knob to secure or release the +90°/-70° tilting movement.
• Use the handle for precise control during panning and tilting.

Image 4.2: Visual guide to the fluid video head's pan and tilt capabilities, showing the range of motion.

4.3 Konverżjoni ta' Monopod

One of the tripod legs can be detached and combined with the center column and fluid head to form a monopod.

1. Identify the leg with a rubber grip that can be unscrewed.
2. Unscrew and detach this leg from the tripod chassis.
3. Remove the fluid head from the tripod.
4. Attach the detached leg to the bottom of the fluid head.
5. Attach the center column to the top of the fluid head.

4.4 Sparar b'Angolu Baxx

For very low-angle shots, the detachable short center column can be utilized.

1. Detach the weight hook from the main center column.
2. Rotate the video head downward at a 90° angle from the center column.
3. Insert the Allen wrench attached to the hook into the center column and unscrew the internal screw.
4. Replace the standard center column with the short center column.

Image 4.3: Step-by-step guide on how to configure the tripod for low-angle shooting using the short center column.

5. Manutenzjoni

Manutenzjoni xierqa tiżgura l-lonġevità u l-prestazzjoni ottimali tat-tripod tiegħek.

• Tindif: Wipe down the carbon fiber legs and metal components with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp cloth and dry thoroughly. Avoid harsh chemicals.
• Lubrikazzjoni: The fluid head is designed for smooth operation. Do not attempt to lubricate internal mechanisms unless specifically instructed by SmallRig support.
• Ħażna: Store the tripod in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Spezzjoni: Periodically check all screws, locks, and joints for tightness. Tighten any loose components carefully.

6 Issolvi l-problemi

If you encounter issues with your SmallRig tripod, refer to the following common solutions:

• Stiff Pan/Tilt Movement: Ensure that the pan lock and tilt lock knobs on the fluid head are fully disengaged. If movement remains stiff, check for any obstructions or debris. Do not force movement.
• Konfigurazzjoni Instabbli: Verify that all leg sections are fully extended and their height lever locks are securely fastened. Ensure leg angles are set appropriately for the terrain and load. The center column should also be locked.
• Kamera Mhux Sikura: Confirm that the quick release plate is correctly attached to your camera and fully seated in the fluid head. Ensure the quick release plate lock is engaged.
• Monopod Conversion Difficulty: Ensure you are detaching the correct leg and that all connections are properly aligned and tightened when assembling the monopod.

For issues not resolved by these steps, please contact SmallRig customer support.

7. Speċifikazzjonijiet

Image 7.1: The tripod's robust carbon fiber construction, emphasizing its lightweight design and 3kg (6.6lb) load capacity.

8. Garanzija u Appoġġ

8.1 Politika ta' Ritorn

This product is eligible for a 30-day refund/replacement return policy from the date of purchase. Please refer to the retailer's specific return guidelines for detailed information.

8.2 Pjanijiet ta' Protezzjoni

Extended protection plans may be available for purchase separately to cover your product beyond the standard return period. Options may include 2-Year or 3-Year protection plans, or a monthly 'Complete Protect' plan.

8.3 Appoġġ għall-Klijent

For technical assistance, warranty claims, or further inquiries, please contact SmallRig customer support through their official websit jew il-bejjiegħ bl-imnut minn fejn inxtara l-prodott.