Introduzzjoni
Thank you for choosing the Qifutan C80-G02 Universal Car Phone Mount. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new phone mount. Designed for versatility, this mount offers secure placement on your car's windshield, dashboard, or air vent, ensuring your smartphone is accessible and stable during travel.
Please read this manual thoroughly before use to ensure optimal performance and safety.
Image: The Qifutan C80-G02 car phone mount, showcasing its adjustable arm and phone cradle, with a smartphone securely held in place.
Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:
- Phone Holder Cradle
- Suction Cup Base with Adjustable Arm
- Air Vent Clip Attachment
- 3M Dashboard Pad (for dashboard mounting, optional)
Istruzzjonijiet għall-installazzjoni
The Qifutan C80-G02 offers three primary mounting options: windshield, dashboard, and air vent.
1. Windshield Mounting
- Clean the desired area on your windshield thoroughly with a clean cloth. Ensure the surface is dry and free of dust or grease.
- Attach the phone holder cradle to the ball joint of the suction cup base. Tighten the collar nut to secure it.
- Neħħi l-film protettiv mit-tazza tal-ġbid.
- Press the suction cup firmly against the cleaned windshield surface.
- Push down the locking lever on the suction cup base to create a strong vacuum seal.
- Adjust the arm and cradle to your preferred viewangolu tal-ing.
Image: Visual guide demonstrating the assembly of the phone holder with the suction cup for windshield and dashboard, and with the air vent clip.
2. Dashboard Mounting
For dashboard mounting, a smooth, flat surface is required. If your dashboard is textured or uneven, use the provided 3M Dashboard Pad.
- Clean the desired dashboard area thoroughly.
- If using the 3M Dashboard Pad: Peel off the protective film from one side of the 3M pad and firmly press it onto the dashboard. Allow it to adhere for at least 24 hours before attaching the suction cup.
- Attach the phone holder cradle to the ball joint of the suction cup base. Tighten the collar nut.
- Neħħi l-film protettiv mit-tazza tal-ġbid.
- Press the suction cup firmly onto the cleaned dashboard surface or the 3M pad.
- Push down the locking lever on the suction cup base to create a strong vacuum seal.
- Adjust the arm and cradle to your preferred viewangolu tal-ing.
Note: The 3M Dashboard Pad is NOT required when using the phone holder on the windshield.
Image: An illustration of the upgraded suction cup technology, highlighting its three layers of nano adhesive and resistance to extreme temperatures (-104°F to 214°F).
3. Air Vent Mounting
Note: This mount is not suitable for circular air vents.
- Attach the phone holder cradle to the ball joint of the air vent clip attachment. Tighten the collar nut.
- Unscrew the nut on the air vent clip to open the hook.
- Hook the clip onto one of your car's horizontal or vertical air vent blades.
- Tighten the nut to secure the clip firmly to the vent blade. The clip features a stainless steel hook with thick plastic padding for secure engagement without scratches.
- Adjust the phone holder to your desired viewangolu tal-ing.
Immaġni: Dettaljata view of the upgraded metal hook mechanism for air vent attachment, illustrating how it securely grips the vent blade with double lock protection.
Istruzzjonijiet Operattivi
Daħħal it-Telefon Tiegħek
- Press the release button located on the back of the phone holder cradle. The side arms will automatically open.
- Place your smartphone into the cradle, ensuring it rests on the bottom support feet.
- Gently squeeze the side arms together until they securely grip your phone. The robust silicone rubber padding provides a firm hold.
It-Tneħħija tat-Telefon Tiegħek
- Press the release button on the back of the phone holder cradle. The side arms will open, allowing you to safely remove your phone.
L-aġġustament tal- ViewIng Angolu
- The mount features a 360-degree rotating ball joint. Loosen the collar nut behind the phone cradle to adjust the angle, then tighten it to secure.
- The extension arm can be adjusted from 3.7 inches to 5.9 inches. Loosen the knob on the arm, extend or retract, then tighten the knob.
Image: The Qifutan phone mount demonstrating its universal compatibility, securely holding smartphones with various cases including OtterBox, MagSafe, Wallet, and PopSocket designs.
Manutenzjoni
Tindif tat-Tazza tal-Ġbid
If the suction cup loses its stickiness, it can be reactivated:
- Detach the suction cup from its mounting surface.
- Wash the suction cup with warm water.
- Allow it to air dry completely. Do not wipe with a cloth, as this can leave lint.
- Once dry, the suction cup's adhesive properties will be restored.
Image: A visual guide illustrating the process of washing the suction cup with water to restore its adhesive strength, emphasizing convenience and sustainability.
Kura Ġenerali
- Wipe the phone holder with a soft, damp drapp kif meħtieġ.
- Evita li tuża kimiċi ħarxa jew tindif li joborxu.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Suction cup does not stick firmly. | Surface is dirty, wet, or textured. Suction cup is dirty or dry. | Clean the mounting surface and the suction cup. Wash the suction cup with water and air dry to reactivate stickiness. For textured dashboards, use the 3M Dashboard Pad. |
| Phone holder feels loose or wobbly. | Collar nuts or adjustment knobs are not tightened. | Ensure all collar nuts (behind the cradle and on the arm) and the air vent clip nut are securely tightened. |
| Phone does not fit in the cradle. | Phone size exceeds specifications (4.0-7.1 inches, up to 14mm thick). | Verify your phone's dimensions. This mount accommodates phones between 4.0 and 7.1 inches and up to 14mm thick. |
| Air vent clip does not attach securely. | Vent type is circular or clip is not tightened. | Ensure your air vent is not circular. Tighten the screw on the air vent clip firmly onto a horizontal or vertical vent blade. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | C80-G02 |
| Brand | Qifutan |
| Tip ta 'Immuntar | Windskrin, Dashboard, Air Vent |
| Daqs tat-Telefon Kompatibbli | 4.0 sa 7.1 pulzier |
| Ħxuna Massima tat-Telefon | 14mm (0.55 pulzier) |
| Adjustable Arm Length | 3.7 sa 5.9 pulzier |
| Rotazzjoni | 360-degree ball joint |
| Suction Cup Material | Heat-resistant TPU with 3-layer nano adhesive |
| Operating Temperature (Suction Cup) | -44°F sa 194°F (-42°C sa 90°C) |
| Operating Temperature (Mechanism) | -40°F sa 113°F (-40°C sa 45°C) |
| Piż tal-oġġett | 12 uqija (madwar 340 gramma) |
| Dimensjonijiet tal-Pakkett | 6.18 x 4.21 x 3.15 pulzieri |
| Kulur | Fibra tal-Karbonju |
Garanzija u Appoġġ
Informazzjoni dwar Garanzija
The Qifutan C80-G02 Universal Car Phone Mount comes with a garanzija ta 'sena from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from material and workmanship flaws under normal use. Please retain your proof of purchase for warranty claims.
Il-garanzija ma tkoprix ħsara kkawżata minn użu ħażin, aċċident, modifika mhux awtorizzata, jew installazzjoni mhux xierqa.
Appoġġ għall-Klijent
For any questions, concerns, or technical assistance, please contact our professional customer service team. We offer 7x24 hour support biex niżguraw is-sodisfazzjon tiegħek.
You can reach us through the Amazon messaging system or visit the official Qifutan store page for contact details:
