Ortur LU2-10A 10000mW Laser Module Instruction Manual

1. Introduzzjoni

This manual provides essential information for the safe and effective use of your Ortur LU2-10A 10000mW Laser Module. Please read these instructions carefully before installation and operation. This laser module is designed for high-precision engraving and cutting with Ortur Laser Engravers.

2. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:

Immaġni: Dettaljata view of all components included in the Ortur LU2-10A Laser Module package, such as the laser module, laser shield, air assist, various screws, cables, and tools.

LU2-10A Laser Module
Laser Shield
Assistenza bl-Ajru
Blokk ta 'Appoġġ
Slider
OUC2.0
Small Coupling
Adapter tal-Enerġija 24V 2A
Dedicated LaserWire
Pipe tal-Ajru
Konnettur tal-Pajpijiet
Normal Adapter Cable
Laser Backboard
M3x5mm Screws*6 (Used for Slider)
Thumb Screws*2
M3x8mm Screws*4 (Used for OLM2S2)
M3x12mm Screws*4 (Used for OLM2)
Rabta tal-kejbil * 10
M3 Gasket*1
Wrench
Lenti
Regolatur tal-Fluss tal-Arja
OLM2/S2 OUC Exclusive Adapter Cable

3. Setup u Installazzjoni

This section guides you through the assembly and installation of the LU2-10A Laser Module onto your Ortur Laser Engraver. Ensure the engraver is powered off and disconnected from the power source before beginning installation.

3.1. Installation Tutorial Video

Video: A detailed installation tutorial for the Ortur Laser Master 2 Pro S2 LU2-10A, demonstrating step-by-step assembly and connection procedures.

3.2. Laser Module Installation Steps

Attach the laser module to the engraver's carriage.
Secure the laser module using the provided thumbscrews.
Insert the 5-pin terminal of the dedicated laser line into the laser module's port.
Connect the other end of the laser line to the appropriate port on the engraver's control board.
Install the laser shield onto the laser module to ensure eye protection during operation.
Connect the air assist hose to the air intake port on the laser module and to an external air pump (not included).

Ortur LU2-10A Laser Module installed on engraver, cutting wood

Image: The Ortur LU2-10A Laser Module actively cutting a piece of wood, demonstrating its operational capability.

4. Istruzzjonijiet Operattivi

The Ortur LU2-10A Laser Module offers powerful and precise capabilities for various materials.

4.1. Karatteristiċi ewlenin

Kompatibilità Wiesgħa: Compatible with Ortur Laser Master 2, Ortur Laser Master 2 S2, Ortur Laser Master 2Pro S2, and Ortur Laser Master 3 Laser Engravers.
Versatilità tal-Materjal: Engrave and cut acrylic, metal, wood, stainless steel, glass, ceramics, leather, food, paper, fabric, and more.
Riżultat b'saħħtu: True 10000mW laser output for effective cutting and engraving.
Preċiżjoni Għolja: Compressed spot size of 0.05mm x 0.1mm for detailed work.
Effiċjenza Għolja: Lightweight design (235g) allows for engraving speeds up to 15000mm/min.
Dual Fan Cooling: Optimized cooling system ensures stable long-term operation without overheating.
Operazzjoni Stabbli: 24V electrical system and high-quality cables support 24 hours of uninterrupted, consistent engraving.

4.2. Kapaċitajiet ta' Inċiżjoni u Qtugħ

The LU2-10A module is capable of cutting various materials with significant thickness:

Up to 30mm acrylic.
Up to 20mm wood.

Diagram showing dual laser beams combining for 10W output and 0.05x0.1mm compressed spot

Image: An internal diagram illustrating how two 5.5W laser beams are combined using light combing lenses to achieve a true 10W output with a precise 0.05 x 0.1mm compressed spot.

Ortur LU2-10A Laser Module with air intake and lightweight design

Image: The Ortur LU2-10A Laser Module highlighting its air intake for cooling and its lightweight design (only 235g), contributing to high engraving speeds.

Intern view of Ortur LU2-10A Laser Module showing dual 5.5W lasers

Immaġni: Trasparenti view of the Ortur LU2-10A Laser Module, showing the internal arrangement of two 5.5W lasers combining to form a single 10W output beam.

Ortur LU2-10A Laser Module with built-in air assist and comparison of cut quality

Image: The Ortur LU2-10A Laser Module featuring its built-in air assist system, with an example showing a cleaner cut (labeled "Ours") compared to a cut without air assist (labeled "Other").

Diagram illustrating the 0.05mm x 0.1mm compressed laser spot for extreme engraving

Image: A visual representation of the laser's compressed spot, showing its dimensions of 0.05mm x 0.1mm, which enables extreme precision in engraving.

5. Manutenzjoni

Regular maintenance ensures optimal performance and extends the lifespan of your laser module.

Tindif tal-Lenti: Periodically clean the laser lens with a soft, lint-free cloth and appropriate lens cleaning solution to prevent residue buildup that can affect laser performance.
Air Assist Nozzle: Ensure the air assist nozzle is clear of debris to maintain effective airflow during cutting and engraving.
Fannijiet li jkessħu: Check the dual cooling fans for dust accumulation and clean them gently to ensure proper heat dissipation.
Spezzjoni tal-Cable: Regularly inspect all cables for any signs of wear, damage, or loose connections.

6 Issolvi l-problemi

This section addresses common issues you might encounter with your Ortur LU2-10A Laser Module.

Problema	Kawża Possibbli	Soluzzjoni
Il-lejżer mhux qed jispara jew il-ħruġ tiegħu huwa dgħajjef.	Konnessjoni tal-kejbil maħlula. Lenti tal-lejżer maħmuġa. Incorrect power settings in software. Laser module overheating.	Check all cable connections, especially the 5-pin laser line. Naddaf il-lenti tal-lejżer skont l-istruzzjonijiet tal-manutenzjoni. Verify laser power and speed settings in your engraving software. Ensure cooling fans are clear and functioning. Allow module to cool if hot.
Inconsistent engraving/cutting results.	Unstable engraver frame. Loose belts or rollers. Material not flat or secured. Fokus żbaljat.	Ensure the engraver frame is stable and all screws are tightened. Check and adjust belt tension and roller tightness. Secure the material firmly to the work surface. Verify the laser focus is correctly set for the material thickness.
Air assist not functioning.	Blocked air assist nozzle. Loose air hose connection. External air pump issue.	Clear any debris from the air assist nozzle. Check all air hose connections for tightness. Ensure your external air pump is powered on and functioning correctly.

7. Speċifikazzjonijiet

Karatteristika	Dettall
Dimensjonijiet tal-Prodott	4.72 x 1.97 x 1.73 pulzieri
Numru tal-Mudell tal-Oġġett	Ortur-LaserMaster2-ProS2 (LU2-10A variant)
Piż tal-oġġett	1.54 liri
Qawwa tal-Ħruġ tal-Laser	10000mW (10W)
Compressed Spot Size	0.05mm x 0.1mm
Veloċità tal-inċiżjoni	Sa 15000mm/min
Sistema tat-tkessiħ	Dual Fan Cooling
Sistema Elettrika	24V
Kompatibilità	Ortur Laser Master 2, 2 S2, 2Pro S2, 3

8. Garanzija u Appoġġ

For warranty information, technical support, or further assistance, please refer to the official Ortur webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

Official Ortur Websit: www.ortur.net

	Inspiraesth APP Software Manual for Ortur Laser Engravers Comprehensive user manual for the Inspiraesth APP, detailing installation, device connection, photo editing, engraving settings, and control center functions for Ortur laser engraving machines.
	Manwal tal-Utent tal-Modulu tal-Laser Ortur LU2-2: Gwida għall-Iffukar Gwida komprensiva dwar kif taġġusta l-fokus tal-modulu tal-lejżer Ortur LU2-2 bl-użu tat-tarka tal-lejżer, il-gauge fokali, u l-pjanċa tal-aluminju. Tinkludi speċifikazzjonijiet tekniċi u informazzjoni dwar is-sigurtà għall-inċiżuri tal-lejżer Ortur.
	Ortur Laser Master 3 LU2-10A-24V: Diode Laser Engraver Specifications Speċifikazzjonijiet dettaljati u prodott fuqview for the Ortur Laser Master 3 LU2-10A-24V diode laser engraver, including features, materials, dimensions, and packaging information.
	ORTUR Laser Master 3: Installation and Safety Manual Official installation and safety manual for the ORTUR Laser Master 3 laser engraver. Covers setup, package contents, safety precautions, and support resources in multiple languages.
	Manwal tal-Utent tal-Modulu tal-Laser ORTUR LU2-4-LF: Aġġustament tal-Fokus u Installazzjoni tal-Assistenza bl-Ajru Manwal tal-utent għall-Modulu tal-Laser ORTUR LU2-4-LF, li jiddeskrivi l-użu tat-tarka tal-laser, il-metodi ta' aġġustament tal-fokus (gauge fokali, pjanċa tal-aluminju), u l-installazzjoni pass pass tal-air-assist. Jinkludi informazzjoni dwar is-sigurtà u link għal vidjo tutorjali.
	Ortur Laser Master 2 Pro S2: Manwal tal-Assemblaġġ u Gwida tas-Sigurtà Gwida komprensiva għall-assemblaġġ u t-tħaddim sikur tal-inċiżur bil-lejżer tad-desktop Ortur Laser Master 2 Pro S2, inklużi l-karatteristiċi, il-lista tal-partijiet, l-istruzzjonijiet tas-sigurtà, il-passi tal-assemblaġġ, il-partijiet fakultattivi, u s-settings tas-softwer.

Ortur LU2-10A