1. Introduzzjoni
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E3 Dual Motor Electric Standing Desk. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Informazzjoni Importanti dwar is-Sigurtà
To prevent injury and ensure optimal performance, please adhere to the following safety guidelines:
- Always ensure the desk is properly assembled and stable before use.
- Teċċedix il-limitu massimu tal-piż ta' 220 lbs (100 kg).
- Be cautious when adjusting the desk height to avoid injury from pinching or crushing. Ensure no objects or body parts are in the path of the moving desk.
- Żomm it-tfal u l-annimali domestiċi 'l bogħod mill-iskrivanija waqt l-operazzjoni.
- Toqgħodx bilqiegħda jew bilwieqfa fuq l-iskrivanija.
- Uża biss l-adapter tal-enerġija u l-komponenti pprovduti.
- Jekk iseħħ xi ħoss jew moviment mhux tas-soltu, waqqaf l-operazzjoni immedjatament u aqla’ l-iskrivanija.
3. Setup u Assemblea
The FLEXISPOT E3 desk requires assembly. It typically arrives in two separate packages. While the lower frame assembly is straightforward, the desktop may require drilling approximately 20 holes for secure attachment. It is recommended to have two people for assembly due to the weight of the components.
3.1. Kontenut tal-Pakkett
Verify that all components are present before beginning assembly. Refer to the included assembly guide for a complete list of parts.
3.2. Passi tal-Assemblea
- Iftaħ il-komponenti kollha mill-pakkett u poġġihom fuq wiċċ nadif u artab biex tevita l-grif.
- Assemble the desk frame according to the detailed instructions provided in the separate assembly guide.
- Attach the desktop to the assembled frame. Ensure proper alignment before securing with screws. Note that pre-drilled holes may not be present on the desktop, requiring careful drilling.
- Connect the control panel and power cables as instructed.
- Place the desk in its desired location, ensuring it is level and stable.
4. Istruzzjonijiet Operattivi
The FLEXISPOT E3 desk features a dual-motor system for smooth and quiet height adjustments, controlled by a programmable panel.
4.1. Control Panel Overview
The control panel allows you to raise or lower the desk and save preferred height positions.
- Vleġeġ 'il fuq/'l isfel (↑ / ↓): Press and hold to continuously adjust the desk height. Release to stop at the desired level.
- Presets tal-Memorja (1, 2, 3, 4): These buttons allow you to save and recall up to four custom height settings.
4.2. Issettjar ta' Presets tal-Memorja
- Aġġusta l-iskrivanija għall-għoli mixtieq tiegħek billi tuża l-vleġeġ 'il fuq/'l isfel.
- Press the 'M' or 'Set' button (if available, or follow specific instructions for your panel) followed by one of the number buttons (1, 2, 3, or 4). The display may flash or beep to confirm the setting is saved.
- To recall a saved height, simply press the corresponding number button. The desk will automatically move to that preset height.
4.3. Dual Motor Operation
The E3 desk is equipped with dual motors, providing seamless and silent operation (under 50 dB). This design allows for a higher weight capacity and smoother transitions between sitting and standing positions.
4.4. Kapaċità tal-piż
The desk is engineered to support up to 220 lbs (100 kg), providing a sturdy and reliable workstation for various tasks and equipment.
4.5. Sistema Kontra l-Ħabtiet
The desk is equipped with an anti-collision system that detects resistance during height adjustment. If an obstacle is encountered, the desk will automatically stop and reverse slightly to prevent damage or injury.
5. Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-iskrivanija wieqfa tiegħek.
- Tindif: Imsaħ id-desktop u l-qafas b'ċarruta ratba u damp drapp. Evita kimiċi ħarxa jew prodotti tat-tindif li joborxu li jistgħu jagħmlu ħsara lill-finitura.
- Ġestjoni tal-Kejbil: Iċċekkja u organizza l-kejbils perjodikament biex tevita t-tħabbil u tiżgura li ma jinterferixxux mal-moviment tal-iskrivanija.
- Qafliet: Iċċekkja l-viti u l-boltijiet kollha minn żmien għal żmien biex tiżgura li huma ssikkati sew. Erġa' ssikkahom jekk meħtieġ.
- Spezzjoni tal-Mutur: Ensure the motor and electrical connections are free from dust and debris. Do not attempt to open the motor housing.
6 Issolvi l-problemi
If you encounter issues with your FLEXISPOT E3 desk, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-iskrivanija ma tiċċaqlaqx jew ma tirrispondix għall-kontrolli. | Power cable disconnected, circuit breaker tripped, control panel malfunction. | Check all cable connections. Ensure the power outlet is functional. Try unplugging and replugging the desk after 30 seconds. |
| L-iskrivanija tiċċaqlaq b'mod irregolari jew tagħmel ħsejjes mhux tas-soltu. | Uneven load, loose fasteners, obstruction. | Ensure weight is evenly distributed. Check and tighten all assembly fasteners. Remove any obstructions. |
| Error codes displayed (e.g., ASR/E20). | Motor overload, sensor issue, or internal fault. | Unplug the desk for at least 10 minutes, then plug it back in. If the error persists, contact customer support. Avoid exceeding the weight limit. |
| Is-sistema kontra l-ħabtiet tattiva ta' spiss. | Obstruction, sensitive setting. | Ensure there are no objects in the desk's path. Refer to the full manual for instructions on adjusting anti-collision sensitivity if available. |
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti ta' FLEXISPOT għal aktar assistenza.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | FLEXISPOT |
| Mudell | E3 |
| Dimensjonijiet tal-Prodott | 55.1"D x 27.5"W x 27.6"H |
| Kulur | Qafas Abjad + Fuq Abjad |
| Stil | Moderna |
| Materjal Bażi | Metall |
| Tip ta 'Materjal ta' Fuq | Injam |
| Tip Finish | Injam |
| Karatteristika Speċjali | Corded |
| Għamara Finish | Abjad |
| Daqs | 55"x28" Biċċa sħiħa |
| Komponenti Inklużi | Keyboard Tray, Monitor Arm (Note: Components may vary by package) |
| UPC | 840460427586 |
| Item Height (Adjustable Range) | 27.6 inches (Min) to 46.8 inches (Max) |
| Rakkomandazzjoni tal-Piż Massimu | 220 Lira (100 kg) |
| Assemblea Meħtieġa | Iva |
| Tip ta' Mutur | Mutur Doppju |
| Livell ta' Storbju | Taħt 50 dB |
8. Garanzija u Appoġġ
FLEXISPOT jipprovdi kopertura ta' garanzija komprensiva għas-serħan tal-moħħ tiegħek:
- Kopertura ta' 5 Snin: Japplika għall-qafas tal-iskrivanija u l-mutur.
- Kopertura ta' 2 Snin: Applies to the control panel and other electronics.
For any assistance, warranty claims, or technical support, please contact FLEXISPOT customer service. Refer to your purchase documentation or the official FLEXISPOT websit għad-dettalji tal-kuntatt.
