Introduzzjoni
This manual provides detailed instructions for the MCHOSE 8K USB Wireless Receiver. This device is designed to enhance the performance of compatible MCHOSE wireless mice by enabling an 8000Hz polling rate, resulting in ultra-low latency and precise cursor control.
Image: The MCHOSE 8K USB Wireless Receiver, a compact black device with a USB-C port on one end and a white indicator line on top.
Setup Istruzzjonijiet
Follow these steps to pair your MCHOSE wireless mouse with the 8K USB Wireless Receiver:
- Ensure your compatible MCHOSE wireless mouse is powered on and its switch is set to the [2.4G] mod.
- On the mouse, press and hold the left, middle, and right mouse buttons simultaneously for approximately 5 seconds. The mouse's indicator light will begin flashing yellow, indicating it is in pairing mode.
- Connect the Type-C end of the provided data cable into the corresponding port on the 8K receiver.
- Plug the standard USB end of the data cable into an available USB port on your computer (PC/Mac/Laptop).
- Bring the mouse close to the receiver. The pairing process is successful when the mouse's indicator light turns off.
Image: The MCHOSE 8K Wireless Receiver connected to a laptop via its USB-C port, with a green indicator light visible.
Operating Instructions: Polling Rate Adjustment
The MCHOSE 8K USB Wireless Receiver supports adjustable polling rates to optimize performance for various tasks, from office work to competitive gaming.
- Rata ta' Votazzjoni ta' 8000Hz: Provides 8,000 signals per second, significantly reducing latency to 0.125ms for highly accurate and responsive cursor control. This is ideal for competitive gaming where precision is critical.
- Smart Polling Rate Adjustment: You can customize the polling rate settings using the official MCHOSE Driver Software. Available polling rates include 125Hz, 250Hz, 500Hz, 1000Hz, 2000Hz, 4000Hz, and 8000Hz. Adjust the rate to suit your specific usage scenario.
Image: A visual comparison demonstrating the difference between 1000Hz and 8000Hz polling rates. The 1000Hz trajectory shows slight hold-ups, while the 8000Hz trajectory appears smooth and continuous.
Image: A diagram illustrating how different polling rates (1000Hz, 2000Hz, 8000Hz) affect the timing of mouse input within display frames, showing reduced "put off" time with higher rates.
Kompatibilità
The MCHOSE 8K USB Wireless Receiver is compatible with the following MCHOSE wireless mouse models:
- L7 Series: L7, L7 Pro, L7 Ultra
- A7 Series: A7, A7 Pro
- M7 Series: M7, M7 Pro
Nota: The A7 Ultra and M7 Ultra models already include an 8K NANO Receiver. Therefore, purchasing this additional 8K receiver is not necessary for those specific models.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Dimensjonijiet tal-Prodott | 1.45 x 0.9 x 0.51 pulzieri (3.68 x 2.29 x 1.3 ċm) |
| Piż tal-oġġett | 9.6 uqija (272 gramma) |
| Numru tal-Mudell tal-Oġġett | 8K-Receiver |
| Brand | MCHOSE |
| Interface tal-Ħardwer | USB 3.0 Tip Ċ |
| Kulur | Iswed |
| Apparati Kompatibbli | Desktop, Game Console, Laptop (with compatible MCHOSE mice) |
| Protokoll tal-Kollegament tad-Data | USB |
| Rata ta' Trasferiment tad-Dejta (Mass) | 8000 Hz |
Issolvi l-problemi
- Apparat Mhux Qed Jiġi Pairing:
Ensure the mouse is in 2.4G mode and the pairing sequence (holding left, middle, and right buttons) is performed correctly until the yellow light flashes. Verify the receiver is securely plugged into a functional USB port on your computer. Try a different USB port if necessary.
- Konnessjoni intermittenti:
Ensure the receiver is not obstructed and is within close proximity to the mouse. Avoid placing the receiver near other wireless devices that may cause interference. Update your mouse's firmware and MCHOSE Driver Software to the latest versions.
- Polling Rate Issues:
Confirm that the MCHOSE Driver Software is installed and updated. Use the software to select your desired polling rate. Some systems or applications may not fully support 8000Hz; try a lower polling rate (e.g., 4000Hz or 1000Hz) to see if the issue resolves.
Manutenzjoni
To ensure optimal performance and longevity of your MCHOSE 8K USB Wireless Receiver:
- Żomm ir-riċevitur nadif u ħieles mit-trab. Uża drapp artab u niexef għat-tindif.
- Evita li tesponi r-riċevitur għal temperaturi jew umdità estremi.
- Handle the receiver gently to prevent physical damage to the ports or casing.
Garanzija u Appoġġ
For warranty information, technical support, or further assistance, please refer to the official MCHOSE website or contact MCHOSE customer service directly. Details are typically provided with your product packaging or on the manufacturer's websit.
Żur il-Ħanut MCHOSE fuq Amazon għal aktar prodotti u informazzjoni.
