Manwal ta' Istruzzjoni

Introduzzjoni

This manual provides essential information for the care, handling, and display of your Spark 1/43 scale Argo JM19 "Lucky Strike" 1987 Le Mans 24H #117 model car. This highly detailed replica commemorates the iconic endurance racer from the 1987 24 Hours of Le Mans, driven by M. Schanche, W. Hoy, and R. Smith. Please read these instructions carefully to ensure the longevity and pristine condition of your model.

Prodott Overview

The Spark 1/43 Argo JM19 model is a meticulously crafted miniature of the actual race car. It features accurate livery, detailed interior, and precise aerodynamic elements, reflecting the vehicle's appearance during the 1987 Le Mans race. The model is designed for display and is not intended for play.

Figura 1: Quddiem view of the Spark 1/43 Argo JM19 model. This image shows the detailed front fascia, headlights, and sponsor decals, including "Formula Shell" and "Sachs".

Figura 2: Ġenb view of the Spark 1/43 Argo JM19 model. Visible details include the large red circle with the number 117, "Goodyear" tires, and various sponsor logos like "Bosch" and "Sachs".

Figura 3: Wara view of the Spark 1/43 Argo JM19 model. This perspective highlights the intricate rear wing structure, exhaust pipes, and additional sponsor markings.

Unboxing u Setup Inizjali

Upon receiving your model, carefully remove it from its packaging. The model is typically secured to a display base. Avoid touching delicate parts such as mirrors, antennas, or the rear wing during removal. It is recommended to hold the model by its main body or base.

• Open the outer packaging carefully.
• Gently slide the inner display case out.
• If the model is screwed to the base, use an appropriate screwdriver to loosen the screws from underneath the base.
• Lift the clear cover and then carefully lift the model from its base, holding it by the main body.

Linji Gwida għall-Wiri

To preserve the model's condition, consider the following display recommendations:

• Post: Display the model in a stable, level area away from direct sunlight, extreme temperatures, and high humidity. Direct sunlight can cause paint fading and material degradation over time.
• Protezzjoni mit-Trab: Keep the model inside its original display case or a sealed display cabinet to protect it from dust accumulation.
• Vibrazzjoni: Avoid placing the model in areas prone to vibrations, which could cause delicate parts to loosen or break.

Kura u Tindif

Regular cleaning will help maintain the model's appearance. Always handle with care.

• Tneħħija tat-Trab: Use a soft, dry brush (such as a clean makeup brush or a dedicated model brush) to gently remove dust from the surface. For stubborn dust in crevices, a can of compressed air (used sparingly and from a distance) can be effective.
• Marki tas-swaba': If fingerprints appear, gently wipe them with a clean, lint-free microfiber cloth. Avoid using abrasive materials or harsh chemical cleaners, as these can damage the paint or decals.
• Bla Likwidi: Do not use water, cleaning sprays, or any liquid cleaners directly on the model.

Prekawzjonijiet għall-Immaniġġjar

This model is a delicate collectible. Observe the following precautions:

• Always handle the model by its main body or base. Avoid touching small, protruding parts like mirrors, antennas, or the rear wing, as they are fragile and can break easily.
• Do not apply excessive force or pressure to any part of the model.
• Keep out of reach of small children and pets to prevent accidental damage.

Speċifikazzjonijiet

Issolvi l-problemi

As a static display model, operational troubleshooting is not applicable. However, common issues relate to physical condition:

• Akkumulazzjoni tat-Trab: Refer to the "Care and Cleaning" section for dust removal techniques.
• Partijiet maħlula: If a small part becomes loose, it may be possible to reattach it using a small amount of model-specific adhesive. Exercise extreme caution and consult a professional if unsure.
• Paint Fading/Discoloration: This is typically caused by prolonged exposure to direct sunlight or harsh chemicals. Ensure proper display conditions as outlined in "Display Guidelines" to prevent this.

Garanzija u Appoġġ

Specific warranty information for this collectible model is not provided in the product details. For any inquiries regarding manufacturing defects or product support, please refer to the retailer or the official Spark manufacturer's website for their current policies and contact information.

Note: As a collectible item, the model's value and condition are highly dependent on careful handling and display. Damage due to improper handling is typically not covered under manufacturer warranties.