1. Prodott Aktarview
The VTOMAN V3 Pro is a portable and compact car battery jump starter designed to provide reliable power for various vehicles. It also functions as a power bank and an emergency LED light, making it a versatile tool for automotive and outdoor use.
Image: The VTOMAN V3 Pro jump starter unit with its smart jumper cables attached, ready for use.
1.1 X'hemm fil-Kaxxa
Image: A visual representation of all items included in the VTOMAN V3 Pro jump starter kit.
- 1 x VTOMAN V3 Pro Car Jump Starter
- 1 x Smart Jumper Cables
- 1 x Cable tal-Iċċarġjar USB tat-Tip-C
- 1 x Bag tal-Ġarr
- 1 x Manwal għall-Utent
1.2 Dijagramma tal-Prodott
Image: A detailed diagram highlighting the various ports and features of the VTOMAN V3 Pro jump starter, including the power switch, electricity indicator, 12V jumper cable interface, LED flashlight, Type-C input port, USB output port, and integrated compass.
- Swiċċ tal-Enerġija: Activates and deactivates the unit.
- Electricity Indicator: Juri l-livell attwali tal-ċarġ tal-batterija.
- 12V Jumper Cable Interface: Port għall-konnessjoni tal-kejbils tal-jumper intelliġenti.
- Flashlight LED: Jipprovdi dawl b'diversi modi.
- 5V/2A Type-C Input Port: Għall-iċċarġjar tal-unità tal-jump starter.
- 5V/2.1A USB Output Port: Għall-iċċarġjar ta' apparati esterni.
- Boxxla Integrata: Għall-assistenza fin-navigazzjoni.
2. Informazzjoni dwar is-Sigurtà
Aqra l-informazzjoni kollha dwar is-sigurtà qabel tuża dan il-prodott. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew korriment serju.
2.1 Prekawzjonijiet Ġenerali tas-Sigurtà
- Tesponix il-prodott għax-xita jew kundizzjonijiet imxarrbin.
- Do not operate the product if it has been damaged.
- Żomm fejn ma jintlaħaqx mit-tfal.
- Kun żgur li jkun hemm ventilazzjoni xierqa waqt l-użu u l-iċċarġjar.
- Tagħmilx short circuit tal-jumper clamps.
- Dejjem qabbad il-ponta pożittiva (+)amp għat-terminal pożittiv (+) u n-negattiv (-) clamp għat-terminal negattiv (-).
- Disconnect the jumper cables from the jump starter before disconnecting from the vehicle battery.
2.2 Intelligent Safety Protections
The VTOMAN V3 Pro is equipped with 10 intelligent safety protection technologies to ensure safe operation:
Image: An illustration detailing the 10 intelligent safety protections integrated into the VTOMAN V3 Pro jump starter, including over-charge, reverse-polarity, short-circuit, over-current, AI software, spark-proof, over-load, high and low-temperature, over-voltage, and reverse charge protection.
- Protezzjoni Kontra x-Xrar: Jipprevjeni x-xrar waqt il-konnessjoni.
- Reverse Charging Protection: Protects against current flowing back into the jump starter.
- Protezzjoni tal-kurrent żejjed: Salvagwardji kontra fluss eċċessiv ta' kurrent.
- Protezzjoni minn Iċċarġjar Żejjed: Jipprevjeni l-ħsara lill-batterija minn iċċarġjar żejjed.
- Protezzjoni tal-Polarità Reverse: Twissi u tipproteġi kontra klikkjar mhux korrettamp konnessjonijiet.
- Protezzjoni ta 'Temperatura Għolja: Jitfi jekk it-temperatura interna taqbeż il-limiti sikuri.
- Protezzjoni ta 'Temperatura Baxxa: Jiżgura tħaddim sikur f'kundizzjonijiet kesħin.
- Protezzjoni Short Circuit: Jipprevjeni ħsara minn short circuits.
- Overvoltage Protezzjoni: Jipproteġi kontra volum eċċessivtage.
- Protezzjoni ta' tagħbija żejda: Prevents damage from drawing too much power.
If the jumper cable indicator shows a red light, it indicates an incorrect connection or a safety issue. Correct the connection before proceeding.
3. Setup u Iċċarġjar
3.1 Iċċarġjar inizjali
Before first use, fully charge the VTOMAN V3 Pro jump starter. Use the provided Type-C USB cable and a compatible USB wall adapter (not included).
Image: The VTOMAN V3 Pro jump starter connected to a wall adapter via its Type-C USB cable for charging, illustrating the fast charging capability.
- Connect the Type-C cable to the input port on the jump starter.
- Qabbad it-tarf l-ieħor tal-kejbil ma 'sors ta' enerġija USB.
- The electricity indicator lights will illuminate to show the charging progress.
- Ċarġ sħiħ jieħu madwar 2.6 sigħat.
4. Istruzzjonijiet Operattivi
4.1 Jump Starting a Vehicle (Standard Mode)
The VTOMAN V3 Pro can jump start 12V vehicles with up to 6L gasoline or 4L diesel engines. It can operate in temperatures from -4°F to 140°F.
Image: A three-step visual guide demonstrating how to jump start a car: 1. Insert jumper cables into the jump starter. 2. Connect clamps to the car battery (green light indicates correct connection). 3. Start the vehicle.
- Kun żgur li l-jump starter huwa ċċarġjat biżżejjed.
- Insert the smart jumper cable connector into the 12V jumper cable interface on the jump starter.
- Qabbad il- aħmar (+) clamp to the vehicle's terminal tal-batterija pożittiv (+).
- Qabbad il- iswed (-) clamp to the vehicle's terminal negattiv (-) tal-batterija.
- Once connected, the smart cable indicator light should be aħdar solidu, indicating a correct connection and readiness to jump start. If it's red, check connections.
- Ibda l-vettura tiegħek.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.
4.2 Jump Starting a Completely Dead Battery (Boost Mode)
If the vehicle battery is completely dead, the smart cable indicator light may be off or flashing green. In this scenario, use the Boost mode.
Image: A four-step visual guide for using Boost Mode: 1. Insert jumper cables. 2. Connect clamps (flashing green light). 3. Press the 'BOOST' button on the smart cable. 4. Start the vehicle.
- Follow steps 1-4 from Section 4.1.
- If the smart cable indicator light is off or flashing green, press the "BOOST" button on the smart cable.
- The indicator light should turn solid green.
- Ibda l-vettura tiegħek fi żmien 30 sekonda.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.
4.3 Użu bħala Power Bank
The V3 Pro features a 5V/2.1A USB output port to charge various mobile devices.
Image: The VTOMAN V3 Pro jump starter connected via USB to charge a smartphone, demonstrating its power bank functionality.
- Connect your device's USB charging cable to the USB output port on the jump starter.
- Il-jump starter jibda jiċċarġja t-tagħmir tiegħek awtomatikament.
4.4 L-Użu tad-Dawl ta' Emerġenza LED
The integrated LED flashlight has three modes for various situations.
Image: The VTOMAN V3 Pro jump starter's LED flashlight illuminating a dark area, with icons indicating its three modes: normal, strobe, and SOS.
- Press and hold the power button for 3 seconds to turn on the LED light (Normal mode).
- Agħfas il-buttuna tal-qawwa darba biex taqleb għall-modalità Strobe.
- Agħfas il-buttuna tal-qawwa mill-ġdid biex taqleb għall-modalità SOS.
- Press the power button once more to turn off the light.
4.5 Compass Function
The V3 Pro includes an integrated compass for basic directional guidance during outdoor activities or emergencies.
5. Manutenzjoni u Ħażna
Proper maintenance ensures the longevity and performance of your VTOMAN V3 Pro jump starter.
Image: An illustration depicting the 24-month standby time of the VTOMAN V3 Pro jump starter, highlighting its long-term charge retention.
- Iċċarġjar: Recharge the unit every 3-6 months, even if not used, to maintain optimal battery health.
- Tindif: Imsaħ l-unità b'ċarruta niexfa u ratba. Tużax kimiċi ħarxa jew abrażivi.
- Ħażna: Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures. The unit has a 24-month ultra-long standby time and will automatically shut down after 30 seconds of inactivity to conserve power.
- Temperatura: Avoid storing or operating in temperatures outside the recommended range (-4°F to 140°F).
6 Issolvi l-problemi
If you encounter issues with your VTOMAN V3 Pro, refer to the following common problems and solutions.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-vettura ma tixgħelx. | Low charge on jump starter, incorrect cable connection, vehicle battery completely dead. | Ensure jump starter is fully charged. Check cable connections (red to positive, black to negative). If battery is completely dead, use Boost Mode (Section 4.2). |
| L-indikatur tal-kejbil intelliġenti huwa aħmar. | Reverse polarity, short circuit, or other safety issue. | Skonnettja immedjatament clamps. Recheck connections for correct polarity. Ensure clamps are not touching each other or other metal parts. |
| Il-jump starter mhux qed jiċċarġja. | Faulty Type-C cable or USB adapter, unit malfunction. | Try a different Type-C cable and USB wall adapter. Ensure connections are secure. If issue persists, contact customer support. |
| Dawl LED ma jaħdimx. | Unit off, low battery. | Ensure the unit is powered on. Check battery level and recharge if necessary. |
7. Speċifikazzjonijiet
Image: The VTOMAN V3 Pro jump starter held in a hand, illustrating its compact size and light weight (0.61 lbs), with dimensions of 5.95 x 3.15 x 1.15 inches.
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | V3 Pro |
| L-ogħla Kurrenti | 2000 Amps |
| Kompatibilità tal-Magna | Up to 6L Gasoline / 4L Diesel Engines |
| Tip ta 'batterija | Lithium Polymer (2 batteries included) |
| Input (Tip-Ċ) | 5V/2A |
| Output (USB) | 5V/2.1A |
| Ħin tal-Iċċarġjar | Madwar 2.6 sigħat (0-100%) |
| Ħin ta' Standby | Sa 24 xhur |
| Temperatura operattiva | -4°F sa 140°F (-20°C sa 60°C) |
| Dimensjonijiet tal-Prodott | 5.95"D x 3.15"W x 1.15"H |
| Piż tal-oġġett | 0.61 Liri (madwar 9.8 uqija) |
8. Garanzija u Appoġġ
VTOMAN provides comprehensive support for its products.
- Garanzija: Garanzija ta' 18 xahar mid-data tax-xiri.
- Appoġġ Tekniku: Appoġġ tekniku tul il-ħajja huwa disponibbli.
- Kuntatt: For any after-sales questions or technical assistance, please contact VTOMAN customer service. Refer to the product packaging or official VTOMAN websit għad-dettalji tal-kuntatt.
