DDPAI Dash Cam Hardwire Kit User Manual

1. Prodott Aktarview

The DDPAI Dash Cam Hardwire Kit is designed to provide continuous power to your compatible DDPAI dash camera, enabling 24-hour parking surveillance. This kit ensures your dash cam remains operational even when your vehicle's engine is off, offering enhanced security and monitoring capabilities. It converts 12V/2A vehicle power to 5V/3A for the dash cam.

Image 1.1: The DDPAI Hardwire Kit, showing the Type-C connector, power module, and fuse taps.

Kompatibilità

This hardwire kit is specifically compatible with the following DDPAI dash camera models:

• DDPAI Z60
• DDPAI Z60 πLink
• DDPAI Z50 Pro

Image 1.2: Visual representation of compatible dash cam models: Z50 Pro, Z60 Pro, and Z60.

2. Informazzjoni dwar is-Sigurtà

Please read and understand all safety instructions before installation and use. Improper installation can lead to vehicle damage or electrical issues.

• Kun żgur li l-ignition tal-vettura tkun mitfija u l-batterija tkun skonnettjata qabel tibda l-installazzjoni.
• Ikkonsulta professjonist jekk m'intix ċert dwar xi parti tal-proċess tal-installazzjoni.
• Do not modify the hardwire kit or its components.
• Żomm il-prodott 'il bogħod mill-ilma u temperaturi estremi.

Image 2.1: The hardwire kit incorporates multiple safety protections including low voltage, overcurrent, short-circuit, overload, and reverse connection protection.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• DDPAI Hardwire Kit (Type-C connector)
• Fuse Taps (various sizes for compatibility)
• Fjus Puller

4. Speċifikazzjonijiet

5. Setup u Installazzjoni

Proper installation of the hardwire kit is crucial for enabling the parking monitor function and protecting your vehicle's battery. This process involves connecting to your vehicle's fuse box.

Passi ta' Installazzjoni:

1. Identify Fuse Box Location: Locate your vehicle's fuse box. Common locations include under the dashboard, in the glove compartment, or in the engine bay. Refer to your vehicle's owner's manual for the exact location.
2. Identifika s-Sorsi tal-Enerġija: You will need to identify two types of fuse slots:
   • Constant Power (BAT): A fuse that provides power even when the ignition is off (e.g., hazard lights, interior lights). This is for the parking monitor function.
   • Accessory Power (ACC): A fuse that provides power only when the ignition is on (e.g., radio, cigarette lighter). This is for normal driving recording.
   Use a circuit tester to confirm these power sources.
3. Connect the Hardwire Kit:
   • Qabbad il- red wire (BAT) of the hardwire kit to the identified constant power fuse slot using an appropriate fuse tap.
   • Qabbad il- yellow wire (ACC) of the hardwire kit to the identified accessory power fuse slot using an appropriate fuse tap.
   • Qabbad il- wajer iswed (GND) to a metal bolt or screw on the vehicle's chassis to establish a ground connection. Ensure it is a clean, unpainted metal surface.
4. Ir-Rotta tal-Kejbil: Carefully route the hardwire cable from the fuse box to your dash cam's mounting location, tucking it along the vehicle's trim for a clean installation.
5. Qabbad ma' Dash Cam: Plug the Type-C connector of the hardwire kit into your DDPAI dash cam.
6. Funzjonalità tat-Test: Reconnect the vehicle battery (if disconnected) and start the engine to ensure the dash cam powers on. Turn off the engine and remove the key to verify the parking monitor function activates.

Immaġni 5.1: Eż.ample of a fuse box location within a vehicle, highlighting the connection points for the hardwire kit.

6. Istruzzjonijiet Operattivi

Once installed, the DDPAI Hardwire Kit operates automatically with your compatible dash cam to provide continuous power and enable parking surveillance.

Monitor tal-Parkeġġ 24 Siegħa:

When your vehicle's ignition is turned off, the hardwire kit will continue to supply power to the dash cam from the constant power source. This allows the dash cam to enter parking surveillance mode, recording events such as impacts or motion (depending on your dash cam's settings).

Image 6.1: The hardwire kit enables 24-hour parking monitoring for your dash cam, providing continuous surveillance.

Ġestjoni tal-Enerġija tal-IPS:

The hardwire kit, in conjunction with DDPAI dash cams' IPS (Intelligent Power System) power management, intelligently monitors your vehicle's battery voltage. If the vehicle battery voltage drops below a preset threshold, the hardwire kit will automatically cut off power to the dash cam to prevent complete battery drain, ensuring your vehicle can still start.

Image 6.2: A graph illustrating how IPS Power Management detects vehicle voltage and initiates a low voltage shutdown (LVS) to protect the battery.

7. Manutenzjoni

The DDPAI Hardwire Kit requires minimal maintenance. Follow these guidelines to ensure optimal performance:

• Iċċekkja l-konnessjonijiet kollha perjodikament biex tiżgura li huma siguri.
• Keep the cable routing tidy and free from obstructions that could cause damage.
• Avoid exposing the hardwire kit to excessive moisture or extreme temperatures.

8 Issolvi l-problemi

If you encounter issues with your hardwire kit, refer to the following common problems and solutions:

9. Garanzija u Appoġġ

Informazzjoni dwar il-garanzija:

DDPAI offers an 18-il xahar garanzija on this hardwire kit from the date of purchase. This warranty covers manufacturing defects. A Politika ta 'ritorn ta' 7 jum is also available for products with defects.

Appoġġ għall-Klijent:

For any questions, technical assistance, or warranty claims, please contact DDPAI customer support:

• Email: servizzcenter@ddpai.com

Immaġni 9.1: Fuqview of DDPAI's after-sale service, including warranty and support contact.