1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your NB ERGONOMIC Gaming Monitor Arm A6. Designed for heavy-duty use, this monitor arm supports flat, ultrawide, and curved monitors ranging from 27 to 50 inches, with a load capacity of 2-18 kg (4-40 lbs). It features universal VESA 75x75mm/100x100mm compatibility and advanced mechanical spring technology for stable and precise monitor positioning.
Please read this manual thoroughly before installation and use to ensure proper setup and to maximize the ergonomic benefits of your monitor arm.
2. Informazzjoni dwar is-Sigurtà
WARNING: Failure to follow these instructions may result in property damage or personal injury.
- Ensure your desk surface is stable and strong enough to support the combined weight of the monitor arm and your monitor.
- Teċċedix il-kapaċità massima tal-piż ta' 18 kg (40 lbs).
- Verify that your monitor has VESA 75x75mm or 100x100mm mounting holes.
- Żomm partijiet żgħar 'il bogħod mit-tfal.
- Use only the provided hardware. Using incorrect screws may damage your monitor.
- Adjust tension screws only after the monitor is securely mounted to prevent sudden movement.
- Do not attempt to modify the monitor arm.
Nota Importanti: Certain desktop types are not suitable for monitor mount installation:
Unsuitable Desktops: Fragile desktops (e.g., marble, glass), desks with too narrow clamping surfaces due to baffles, or desks with irregular/beveled edges are not recommended for clamp immuntar.
3. Kontenut tal-Pakkett
Before proceeding with installation, please verify that all components are present and undamaged. Refer to the image below for a visual guide to the included parts.
Deskrizzjoni tal-Immaġni: This image displays all parts of the monitor arm kit, including the main arm, VESA plate, desk clamp components, grommet mount parts, various screws (M4x10, M4x12, M6x10, M6x12), washers, Allen wrenches, and cable management accessories.
4. Setup
4.1 Kontrolli ta' qabel l-installazzjoni
- Desk Compatibility: Ensure your desk is suitable for mounting. Avoid fragile materials like glass or marble. For C-clamp mounting, the desk thickness should be 20-90mm (0.8"-3.5") and the bottom depth above 50mm (1.97"). For grommet mounting, the desk thickness should be 20-90mm (0.8"-3.5") and the hole diameter 10-60mm (0.4"-2.3").
- Kompatibbiltà VESA: Locate the VESA mounting holes on the back of your monitor. The arm supports 75x75mm and 100x100mm patterns. If your monitor has an embedded hole, ensure the panel can be placed directly. If the embedded position is small, use the heightening pads and lengthened screws provided.
Deskrizzjoni tal-Immaġni: This image shows how to identify VESA mounting holes on a monitor, including removing a back panel if necessary. It also illustrates the use of heightening pads and different screw sizes for monitors with embedded VESA mounts.
Deskrizzjoni tal-Immaġni: This diagram specifies the required desk dimensions for both Grommet and C-Clamp mounting methods, including desk thickness and hole diameter for grommet, and desk thickness and bottom depth for C-clamp.
4.2 Mounting the Arm to the Desk
The monitor arm supports two mounting methods: C-Clamp and Grommet.
- C-Clamp Installazzjoni:
- Waħħal is-C-clamp base to the edge of your desk.
- Issikka l-clamp screws securely until the base is firm and stable.
- Insert the main pole of the monitor arm into the C-clamp bażi.
- Installazzjoni ta' grommet:
- Jekk l-iskrivanija tiegħek għandha toqba tal-grommet, daħħal il-bażi tal-grommet mit-toqba.
- Waħħal il-bażi minn taħt l-iskrivanija billi tuża l-pjanċa u l-iskorfina pprovduti.
- Insert the main pole of the monitor arm into the grommet base.
Deskrizzjoni tal-Immaġni: A dettaljata view of the C-clamp base, showing how it attaches to the desk edge with two tightening screws for stability.
4.3 Twaħħil tal-Monitor
- Attach the VESA plate to the back of your monitor using the appropriate screws (M4x10, M4x12, M6x10, M6x12) and washers. Ensure the screws are not too long to avoid damaging the monitor's internal components.
- Carefully lift the monitor with the attached VESA plate and slide it onto the monitor arm's mounting head. Ensure it clicks securely into place.
- Confirm the quick-release mechanism is engaged.
Deskrizzjoni tal-Immaġni: This image demonstrates the quick installation of the monitor onto the arm. The VESA plate, already attached to the monitor, slides down onto the arm's head, with an inset showing the red quick-release lever in the locked position.
Deskrizzjoni tal-Immaġni: This image reiterates the quick installation and easy disassembly process, showing the VESA plate being attached to the arm's head and the red lever for securing or releasinil-monitor.
4.4 Ġestjoni tal-Cable
Route your monitor cables through the integrated cable management channels on the arm to maintain a tidy workspace.
Deskrizzjoni tal-Immaġni: A close-up view of the monitor arm's cable management system, illustrating how a blue cable is neatly tucked into the arm's channel.
5. Operazzjoni
5.1 Adjusting Monitor Position
The NB ERGONOMIC Gaming Monitor Arm A6 offers extensive adjustability for optimal viewkumdità:
- Height Adjustment (Lift): The arm provides 260mm (10.2 inches) of vertical lift. Gently push or pull the monitor to the desired height.
- Mejjel: Adjust the monitor tilt by ±50° to reduce glare and find your preferred viewangolu tal-ing.
- Dawwar: Swivel the monitor 360° at the VESA plate for easy screen sharing or portrait mode.
- Rotazzjoni: The arm allows 360° rotation at two points for flexible positioning.
- Estensjoni: The arm can extend up to 620mm (24.4 inches) from the mounting point.
Deskrizzjoni tal-Immaġni: This image illustrates the maximum extension (24.4 inches / 620mm) and vertical lift (10.2 inches / 260mm) capabilities of the monitor arm, demonstrating its range of motion.
Deskrizzjoni tal-Immaġni: This image visually explains the arm's articulation, including 360° swivel, 360° rotation at two joints, and ±50° tilt, showcasinil-flessibbiltà tagħha.
5.2 Aġġustament tat-Tensjoni
The arm's gas spring tension needs to be adjusted to match the weight of your monitor for optimal performance and stability. This adjustment should only be done wara the monitor is mounted.
- Locate the tension adjustment screw on the arm (usually covered by a cap).
- Use the provided Allen wrench to turn the screw.
- Jekk il-monitor tgħolli 'l fuq on its own: Turn the screw towards the "-" direction to reduce tension for a lighter monitor.
- Jekk il-monitor jaqa' on its own: Turn the screw towards the "+" direction to increase tension for a heavier monitor.
- Adjust gradually until the monitor stays at the desired height without drifting up or down.
Deskrizzjoni tal-Immaġni: This image illustrates the tension adjustment process. It shows the monitor arm with a monitor and an inset detailing the tension screw. Instructions guide the user to adjust tension based on whether the monitor raises or falls, emphasizing that adjustment should occur after mounting.
6. Manutenzjoni
- Iċċekkja regolarment il-viti u l-konnessjonijiet kollha biex tiżgura li jibqgħu ssikkati u siguri.
- Naddaf id-driegħ tal-monitor b'ċarruta ratba u damp drapp. Evita prodotti tat-tindif jew solventi li joborxu.
- If movement becomes stiff or jerky, a thin layer of silicone grease can be applied to the joints, if accessible, to improve glide.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Monitor sags or falls down. | Insufficient gas spring tension for monitor weight. | Increase tension by turning the adjustment screw towards "+" (clockwise). Ensure monitor is mounted before adjusting. |
| Monitor floats up or is difficult to push down. | Excessive gas spring tension for monitor weight. | Decrease tension by turning the adjustment screw towards "-" (counter-clockwise). Ensure monitor is mounted before adjusting. |
| Arm feels loose or unstable. | Mounting screws or clamp not fully tightened. | Check and tighten all mounting screws (desk clamp/grommet and VESA plate screws). |
| Il-monitor ma joqgħodx mal-pjanċa VESA. | Incorrect VESA pattern or screw size. | Verify monitor VESA pattern (75x75mm or 100x100mm). Use correct screw length and heightening pads if necessary. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Mudell | A6 |
| Kompatibbiltà tad-Daqs tal-Iskrin | 27 to 50 inches (Flat, Ultrawide, Curved) |
| Kapaċità tal-piż | 2-18 kg (4-40 lbs) |
| Kompatibilità VESA | 75x75mm, 100x100mm |
| Metodu ta 'Immuntar | C-Clamp, Grommet |
| Materjal | Aluminum alloy, Cold-rolled steel, ABS |
| Height Adjustment (Lift) | 260mm (10.2 pulzier) |
| Angolu Mejjel | ± 50° |
| Angolu li jdur | 360° |
| Angolu ta' Rotazzjoni | 360° |
| Estensjoni Massima | 620mm (24.4 pulzier) |
| Ħxuna tal-iskrivanija (C-Clamp) | 20-90mm (0.8"-3.5") |
| Ħxuna tal-Iskrivanija (Grommet) | 20-90mm (0.8"-3.5") |
| Dijametru tat-Toqba tal-Grommet | 10-60mm (0.4"-2.3") |
Deskrizzjoni tal-Immaġni: This diagram provides a summary of the product's key specifications, including dimensions, weight capacity, VESA standards, and articulation ranges.
9. Garanzija
The NB ERGONOMIC Gaming Monitor Arm A6 is backed by a garanzija ta 'sena. This warranty covers manufacturing defects and ensures the product meets its stated performance standards. Please retain your proof of purchase for warranty claims.
10. Appoġġ għall-Klijent
For technical assistance, warranty claims, or any questions regarding your NB ERGONOMIC Gaming Monitor Arm A6, please contact our customer support team. Refer to the product packaging or the official NB ERGONOMIC websit għad-dettalji tal-kuntatt.
