Introduzzjoni
Thank you for choosing the PANACARE Mini Bubble Gun. This automatic bubble machine is designed for ease of use and portability, providing an engaging experience for children aged 3 and up. This manual provides essential information for the safe and proper setup, operation, and maintenance of your bubble gun.

Image: Children enjoying the PANACARE Mini Bubble Gun.
Informazzjoni dwar is-Sigurtà
- Rakkomandazzjoni dwar l-Età: This product is not suitable for children under 36 months (3 years) due to small parts.
- Sigurtà tal-batterija: Tħallatx batteriji qodma ma' batteriji ġodda. Tħallatx batteriji alkalini, standard (karbonju-żingu), jew rikarikabbli (nikil-kadmju). Daħħal il-batteriji bil-polarità korretta. Neħħi l-batteriji jekk il-prodott ma jintużax għal perjodu estiż.
- Soluzzjoni tal-bużżieqa: Use only approved bubble solution. Avoid contact with eyes and mouth. In case of contact, rinse thoroughly with water.
- Superviżjoni: Is-superviżjoni tal-adulti hija rakkomandata waqt l-użu.
Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja l-pakkett biex tiżgura li l-oġġetti kollha huma preżenti:
- 1 x PANACARE Mini Bubble Machine
- 1 x Bubble Solution Bottle
Setup Istruzzjonijiet
- Installa Batteriji: Locate the battery compartment, typically secured with a small screw. Use a screwdriver to open it. Insert 3 x 1.5V AA batteries (not included) according to the polarity markings. Close the compartment securely.
- Attach Bubble Solution: Unscrew the cap from the bubble solution bottle. Securely attach the bottle to the designated opening at the bottom of the bubble gun. Ensure it is tightly fastened to prevent leaks.

Image: Visual guide for battery installation and solution attachment.
Istruzzjonijiet Operattivi
- L-Ewwel Użu: For the initial use, after installing batteries and solution, press and hold the trigger for 10-30 seconds. This allows the machine to expel any air in the tube and begin producing bubbles consistently.
- Generate Bubbles: Simply press and hold the trigger. The bubble gun will automatically generate a continuous stream of bubbles, accompanied by an LED light.

Image: The bubble gun in operation, highlighting its bubble output and LED light.
Manutenzjoni
- Wara l-Użu: When you finish using the bubble gun, pour any remaining bubble liquid from the bottle back into its original container or discard it.
- Cleaning the Tube: Replace the bubble solution bottle with a bottle of clean water. Press the trigger for a few seconds to flush the internal tube, preventing clogs and keeping the machine clean.
- Ħażna tal-batterija: If the bubble gun will not be used for an extended period, remove the batteries to prevent leakage and extend the device's lifespan.
- Tindif ta' barra: Wipe the exterior of the bubble gun with a damp drapp. Tgħaddix l-apparat fl-ilma.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No bubbles are produced. |
|
|
| Bubble gun is leaking. |
|
|
| Diffikultà biex tiftaħ il-kompartiment tal-batterija. |
|
|
Speċifikazzjonijiet
- Mudell: B0DNVS4WY8
- Ditta: P PANACARE
- Dimensjonijiet tal-Prodott: 12 x 12 x 4.5 ċm (4.7 x 4.7 x 1.7 pulzieri)
- Piż tal-oġġett: 6.7 uqija (madwar 190g)
- Materjal: Plastic ABS
- Output tal-bużżieqa: 5000+ bżieżaq kull minuta
- Batteriji Meħtieġa: 3 x 1.5V batteriji AA (mhux inklużi)
- Età Rakkomandata: 3 snin 'il fuq
Garanzija u Appoġġ
For any questions, concerns, or support regarding your PANACARE Mini Bubble Gun, please contact P PANACARE customer service. You can find more information and contact details on the official P PANACARE Amazon Store.
Jekk jogħġbok żomm l-irċevuta tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.





