FLEXISPOT E6 Electric Height Adjustable Standing Desk Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the assembly, operation, and maintenance of your FLEXISPOT E6 Electric Height Adjustable Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

Image: The FLEXISPOT E6 standing desk in a home office setting.

Informazzjoni dwar is-Sigurtà

To prevent injury or damage to the desk, please observe the following safety guidelines:

• Always ensure the desk is properly assembled and stable before use.
• Taqbiżx il-limitu massimu ta 'piż ta' 220 lbs (100 kg).
• Keep the work area clear of obstacles to prevent accidents during height adjustment.
• Always use both hands when adjusting the desk height to maintain stability.
• Never leave children unattended near the desk.
• Ensure all cables are properly managed to avoid entanglement during movement.
• Evita li tpoġġi likwidi direttament fuq il-pannell tal-kontroll jew ħdejn komponenti elettriċi.

Image: Anti-collision system diagram.

Setup u Assemblea

Follow these steps to assemble your FLEXISPOT E6 standing desk. It is recommended to have assistance for certain steps due to the weight of components.

1. Iftaħ il-Komponenti tal-Pakkett

Carefully unpack all components and verify against the parts list provided in your packaging. Ensure all parts are present and undamaged.

2. Arma l-Qafas

Begin by assembling the crossbeams and pedestals. Ensure screws are aligned with square holes in the cross member and pressed tightly. Pre-tighten all screws for installing the cross beams, then tighten them simultaneously.

Video: FLEXISPOT E6 Essential Standing Desk Installation Guide. This video demonstrates the step-by-step assembly process for the desk frame and desktop attachment.

3. Attach the Desktop

Carefully place the desktop upside down on a soft, clean surface. Position the assembled frame onto the desktop, ensuring proper alignment. The distance between the supporting bracket and the edge of the tabletop should not exceed 200mm. Secure the frame to the desktop using the provided screws. Use a drill for efficiency, but ensure not to overtighten.

Image: The assembled desk with a light wood top and white frame.

4. Install Keypad and Cable Management

Attach the intelligent keypad to the underside of the desktop. Ensure the keypad is on the same side as the adapter bracket and its curved edge is flush with the edge of the table top. Connect all necessary cables (AC power cable, power adaptor, extension cord) to the control box and motors. Utilize the cable clips for organized cable management.

Image: Close-up of the intelligent keypad for height adjustment.

Istruzzjonijiet Operattivi

Your FLEXISPOT E6 desk features a dual-motor system for smooth and quiet height adjustments.

Aġġustament Għoli

• Uża l- Up u Down arrows on the keypad to manually adjust the desk height.
• The LED display panel will show the current height.

Presets tal-Memorja

The keypad includes four memorizable height settings for convenience:

1. Aġġusta l-iskrivanija għall-għoli mixtieq billi tuża l-vleġeġ 'il fuq/'l isfel.
2. Agħfas il- M button (or similar memory set button) followed by a number button (1, 2, 3, or 4) to save the current height to that preset.
3. Biex tirrevoka għoli ssejvjat, sempliċement agħfas il-buttuna tan-numru korrispondenti.

Image: Illustration of the desk's height adjustment range.

Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-iskrivanija wieqfa tiegħek.

• Tindif: Imsaħ id-desktop u l-qafas b'ċarruta ratba u damp drapp. Evita prodotti tat-tindif li joborxu jew kimiċi ħarxa li jistgħu jagħmlu ħsara lill-finitura.
• Ġestjoni tal-Kejbil: Periodically check and reorganize cables to prevent tangling or damage, especially after moving the desk.
• Issikkar tal-viti: Occasionally check all screws and bolts to ensure they are securely tightened. Retighten if necessary.
• Distribuzzjoni tal-piż: Distribute weight evenly across the desktop to prevent strain on the motors and frame.

Issolvi l-problemi

If you encounter issues with your FLEXISPOT E6 desk, refer to the following common solutions:

• L-Iskrivanija Mhux Tiċċaqlaq: Check all power connections. Ensure the power adapter is securely plugged into both the wall outlet and the control box.
• Moviment Irregolari: Perform a reset procedure (refer to the specific reset instructions in your packaged manual, as procedures can vary). Ensure no obstacles are impeding movement.
• Kodiċi ta' Żball: If an error code appears on the LED display, consult the full product manual for specific code meanings and solutions.
• Storbju Waqt l-Operazzjoni: A slight hum is normal for dual motors. Excessive or unusual noise may indicate loose components; check all connections and screws.

For persistent issues, please contact FLEXISPOT customer support.

Speċifikazzjonijiet

Key specifications for the FLEXISPOT E6 Electric Height Adjustable Standing Desk:

Image: Desk illustrating its 220 lbs maximum load capacity.

Garanzija u Appoġġ

FLEXISPOT provides comprehensive warranty coverage for your peace of mind:

• 5-Year Coverage: Applies to the desk frame and motors.
• 2-Year Coverage: Japplika għall-pannell tal-kontroll u l-elettronika.

For any assistance, warranty claims, or product inquiries, please contact FLEXISPOT customer support. You can find contact information on the official FLEXISPOT webis-sit jew permezz tal-pjattaforma tax-xiri tiegħek.

Returnable until January 31, 2026.