1. Introduzzjoni
Thank you for choosing the pamo Industrial Design LAS 1 Standard Garment Rack. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new garment rack. Please read these instructions carefully before assembly and retain them for future reference.
Figure 1.1: The pamo Industrial Design LAS 1 Standard Garment Rack, fully assembled and in use.
2. Informazzjoni dwar is-Sigurtà
- Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel tibda l-assemblaġġ. Tużax jekk xi partijiet huma neqsin jew imkissra.
- Assemble the garment rack on a soft, clean surface to prevent scratches.
- Do not exceed the maximum load capacity of 175 pounds (60 kg). Overloading can cause instability and damage.
- This product is designed for freestanding use. While stable, avoid climbing on or hanging from the rack.
- Żomm il-partijiet żgħar 'il bogħod mit-tfal waqt l-assemblaġġ biex tevita perikli ta' fgar.
- Iċċekkja l-konnessjonijiet kollha perjodikament biex tiżgura li jibqgħu ssikkati.
3. Kontenut tal-Pakkett
Verify that all the following components are included in your package. If any parts are missing, please contact customer support.
Figure 3.1: Illustration of typical components included in the package.
- Vertical Pipes (various lengths)
- Horizontal Pipes (various lengths)
- T-Konnetturi
- Konnetturi tal-minkeb
- Floor Flanges / Feet
- Non-slip Felt Pads
- Hex Key (Allen wrench)
- Istruzzjonijiet tal-Assemblaġġ (dan il-manwal)
4. Setup u Assemblea
The pamo Industrial Design Garment Rack features an easy screw system for straightforward assembly. No drilling into walls or floors is required for the freestanding model.
4.1. Preparazzjoni
- Naddaf żona spazjuża għall-assemblaġġ.
- Ifrex il-komponenti kollha u identifikahom billi tuża l-lista tal-partijiet.
- Ensure the floor is protected, especially if assembling on delicate surfaces.
4.2. Passi tal-Assemblea
- Waħħal is-Saqajn: Screw the floor flanges/feet onto the bottom ends of the vertical pipes. Ensure they are tightened securely. Apply the non-slip felt pads to the bottom of the flanges.
- Connect Vertical and Horizontal Pipes: Begin by connecting the lower horizontal pipes to the vertical pipes using T-connectors. Hand-tighten initially.
- Ibni l-Qafas: Continue connecting vertical and horizontal pipes using T-connectors and elbow connectors as per the specific design of your LAS 1 Standard model. Refer to the detailed diagrams provided in the included paper instructions for your specific configuration.
- Konnessjonijiet sikuri: Once the basic frame is assembled, use the provided hex key to firmly tighten all screw connections. Do not overtighten, but ensure all joints are snug to prevent wobbling.
- Pożizzjoni Finali: Carefully move the assembled garment rack to its desired location. The non-slip felt pads will protect your floor.
Figure 4.1: The easy screw system allows for straightforward assembly.
Figure 4.2: Detail of pipe clamping and floor protection with rubber feet.
5. Istruzzjonijiet Operattivi
The pamo Industrial Design Garment Rack is designed for organizing and storing clothing. Its robust construction allows for significant weight capacity.
- Ħwejjeġ Imdendlin: Use standard hangers to hang garments on the horizontal pipes. Distribute weight evenly to maintain stability.
- Kapaċità tal-piż: The rack has a maximum load capacity of 175 pounds (60 kg). Avoid concentrating heavy items in one area.
- Użu Freehold: This model is designed to be freestanding. Ensure it is placed on a level surface. The non-slip felt pads provide stability and floor protection.
- Sistema espansibbli: The modular design allows for future expansion or reconfiguration. Additional components can be purchased separately to adapt the rack to changing needs.
Figure 5.1: The modular system allows for expansion and customization.
6. Manutenzjoni
Proper care will ensure the longevity and appearance of your garment rack.
- Tindif: Imsaħ l-uċuħ tal-metall b'ċarruta ratba u damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the powder-coated finish.
- Spezzjoni: Periodically inspect all connections and joints for tightness. Re-tighten any loose screws using the hex key.
- Floor Pads: Check the non-slip felt pads for wear and tear. Replace them if they become damaged to continue protecting your floor.
Figure 6.1: The MatteGuard coating provides a durable, scratch-resistant surface.
7 Issolvi l-problemi
If you encounter any issues with your garment rack, refer to the following common problems and solutions.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Rack is wobbly/unstable | Loose connections; uneven floor; overloaded | Tighten all screw connections. Ensure the rack is on a level surface. Redistribute weight or reduce load. |
| Pipes do not fit together | Incorrect orientation; debris in threads | Ensure pipes are aligned correctly. Check threads for any obstructions and clear if necessary. |
| Scratches on floor | Missing or worn felt pads | Ensure felt pads are properly attached to all feet. Replace worn pads if necessary. |
8. Speċifikazzjonijiet
| Brand | pamo |
| Mudell | LAS 1 Standard (P-01-087) |
| Kulur | Iswed |
| Materjal | Metal (Solid steel tubes, malleable cast iron fittings) |
| Tip Finish | Powder Coated (MatteGuard) |
| Dimensjonijiet tal-Prodott (H x W x D) | Madwar 76.38" x 38.98" x 23.62" (194 ċm x 99 ċm x 60 ċm) |
| Tip ta' Installazzjoni | Free Standing |
| Kapaċità tat-Tagħbija | 175 Lira (60 Kilogrammi) |
| Assemblea Meħtieġa | Iva |
| Karatteristiċi Speċjali | Easy to Install, Non-slip Felt Pads, Scratch-resistant |
Figure 8.1: Product dimensions for the LAS 1 Standard Garment Rack.
9. Garanzija u Appoġġ
For information regarding product warranty, please refer to the documentation provided with your purchase or visit the official pamo website. If you require assistance with assembly, have questions about product functionality, or need to report a missing/damaged part, please contact pamo customer support.
Informazzjoni ta' Kuntatt: Please refer to the contact details provided on the product packaging or the official pamo webis-sit għall-aktar informazzjoni ta' appoġġ aġġornata.
