1. Introduzzjoni
1.1 Prodott Fuqview
The SainSmart Genmitsu Kiosk 5W Laser Engraver with Camera is a compact and portable laser engraving machine designed for precision engraving and light cutting tasks. It features a 5W (5000mW) diode laser, a 100 x 100 mm engraving area, and a high-precision camera for accurate material positioning. This manual provides essential information for safe and effective operation.
Image 1.1: The SainSmart Genmitsu Kiosk 5W Laser Engraver with its integrated camera module, showcasing its compact design and ability to engrave various items like hats, mugs, and wooden ornaments.
1.2 Informazzjoni dwar is-Sigurtà
WARNING: Laser radiation can cause eye damage and skin burns. Always wear appropriate laser safety glasses when operating the machine. Never look directly into the laser beam.
- This device is a Class 1 laser product, but internal components are Class 4. Exercise caution.
- Ensure the safety cover is closed during operation. The machine is equipped with a safety mechanism that stops operation if the safety cover is opened or if the machine is tilted more than 12° ± 5° for more than one second.
- Operate the engraver in a well-ventilated area to dissipate fumes and smoke.
- Keep flammable materials away from the engraving area.
- Tħallix il-magna waħedha waqt it-tħaddim.
- Żomm it-tfal u l-annimali domestiċi 'l bogħod miż-żona tal-operat.
2. Setup
2.1 Unpacking and Initial Assembly
The Genmitsu Kiosk laser engraver comes largely pre-assembled. Carefully remove all packaging materials.
Image 2.1: The laser engraver as it appears when first unboxed, highlighting the pre-assembled frame and the laser module.
Ensure the laser module is securely seated within the pre-assembled frame.
2.2 Connecting the Camera Module
The high-precision camera is designed specifically for Kiosk laser engraving machines. Connect the camera module to the designated port on the engraver.
Image 2.2: The Kiosk camera module, showing its connection cable and the protective lid that must be removed before use.
Importanti: Remove the protective lid from the camera lens before use.
2.3 Software Installation and Connection
The Genmitsu Kiosk is compatible with LightBurn software and features a dedicated mobile application.
- LightBurn Software: Download and install LightBurn from the official website. Follow the software's instructions for machine setup and calibration.
- Genmitsu APP:
- Download the Genmitsu APP (V2.3.0 or later) from your device's app store.
- Connect your mobile device to the Wi-Fi network named "Genmitsu-Kiosk".
- Ensure both your device and the Kiosk engraver are on the same Wi-Fi network.
- Control the engraver through the app for preview, positioning, and engraving.
Image 2.3: Visual guide for connecting the Genmitsu Kiosk to the mobile application via Wi-Fi.
3. Istruzzjonijiet Operattivi
3.1 Proċess Bażiku tal-Inċiżjoni
- Place your material on the engraving platform.
- Ensure the safety cover is closed.
- Use LightBurn or the Genmitsu APP to load your design.
- Adjust focus and laser parameters according to your material.
- Initiate the engraving process.
Image 3.1: The Genmitsu Kiosk laser engraver actively engraving a design onto a wooden surface.
3.2 Using the Camera for Positioning
The integrated camera allows for precise positioning of your designs on the material.
- Calibrate the camera within LightBurn software.
- The camera can locate item positions and enable precise zone-focused engraving.
- It accurately detects all laser zones, allowing sequential engraving of multiple items without manual intervention.
Image 3.2: A computer screen displaying the LightBurn interface with a design overlaid on a camera feed of the engraving area, demonstrating precise positioning.
3.3 One-Touch Control Features
The engraver features intuitive one-touch controls for common operations.
Image 3.3: A hand interacting with the engraver's control panel, illustrating the ease of cycling through engraving preview, start, pause, and stop functions with a single button press.
- Effortlessly cycle through engraving preview, start, pause, and stop with a single button press.
- The one-touch repeat engraving feature allows for swift replication of designs.
3.4 Kontroll tal-App Mobbli
The Genmitsu APP provides remote control capabilities for your engraver.
Image 3.4: A smartphone displaying the Genmitsu app interface, demonstrating remote control for preview, positioning, and engraving.
Key features of the Genmitsu APP V2.3.0:
- Grid printing feature: Achieve precise alignment for your projects.
- Layer editing feature: Adjust layers for easier design manipulation.
3.5 Material Compatibility and Settings
The 5W diode laser is suitable for engraving and light cutting on various materials.
- Inċiżjoni: Medium-depth marks on medium-density woods (e.g., 5mm basswood, 3mm plywood), thick leather, plastics, fabrics, coated metal, and transparent acrylics (requires laser marking spray).
- Light Cutting: 5mm basswood and 3mm plywood.
Immaġni 3.5: Eż.amples of 5W laser cutting on plywood and basswood, demonstrating the machine's capability to cut these materials in a single pass.
Optimal settings vary by material. Refer to the software's material library or perform test engravings to determine the best parameters for your specific material.
4. Manutenzjoni
4.1 Tindif
- Regularly clean the engraving platform and surrounding areas to remove debris and dust.
- Uża drapp ratba u niexfa biex timsaħ il-barra tal-magna.
- For the camera lens, use a lens cleaning cloth and solution to avoid scratches.
4.2 Laser Module Care
- Keep the laser lens clean. Dust or debris on the lens can reduce laser power and engraving quality.
- Avoid touching the laser lens directly.
- The laser module has a lifespan of 1000+ hours (at <27°C). Proper care extends its life.
5 Issolvi l-problemi
5.1 Kwistjonijiet Komuni u Soluzzjonijiet
| Ħruġ | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-lejżer mhux qed jispara jew il-ħruġ tiegħu huwa dgħajjef | Dirty laser lens, incorrect power settings, loose connection. | Clean the laser lens. Verify power settings in software. Check all cable connections. |
| Engraving is not precise or misaligned | Camera not calibrated, material shifted, incorrect design origin. | Recalibrate the camera. Ensure material is secured. Check design origin in software. |
| Il-magna tieqaf bla mistenni | Safety cover opened, machine tilted, emergency stop activated. | Ensure safety cover is closed. Place machine on a stable surface. Reset the machine if emergency stop was pressed. |
| Ma nistax nikkonnettja mal-Wi-Fi/App | Incorrect Wi-Fi password, device not on same network, app outdated. | Verify Wi-Fi password. Ensure both devices are on the "Genmitsu-Kiosk" network. Update the Genmitsu APP. |
6. Speċifikazzjonijiet
6.1 Data Teknika
- Mudell: Kiosk 5W Laser Engraver+Camera
- Qawwa tal-Laser: 5W (5000mW) Diode Laser
- Żona tal-inċiżjoni: 100 x 100 mm (3.9 x 3.9 pulzieri)
- Veloċità tal-inċiżjoni: Sa 12,000 mm/min
- Preċiżjoni: 0.01 mm
- Klassi tas-Sigurtà: Class 1 (enclosed), Class 4 (internal laser)
- Konnettività: Wi-Fi, USB
- Kompatibilità tas-Softwer: LightBurn, Genmitsu APP
- Karatteristiċi tas-Sigurtà: Safety cover interlock, tilt sensor (stops operation if tilted >12° ± 5° for >1 sec)
7. Garanzija u Appoġġ
Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għas-sit uffiċjali ta' SainSmart webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta' garanzija.
Uffiċjali ta' SainSmart Websit: www.sainsmart.com
