Informazzjoni Importanti dwar is-Sigurtà
Please read and understand all instructions and safety warnings before assembly and use of this product. Failure to follow these instructions may result in injury or product damage.
- Do not attempt to lift or move the box spring when it is fully assembled.
- Dejjem segwi l-istruzzjonijiet tal-assemblaġġ bir-reqqa biex tevita l-instabbiltà jew il-kollass.
- Be cautious of sharp edges and the folding design during assembly and use.
- Regularly inspect the box spring for any signs of wear or damage.
- Taqbiżx il-kapaċità ta 'piż massimu ta' 3500 lbs.
Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-assemblaġġ.
- Komponenti tal-Qafas tar-Rebbiegħa tal-Kaxxa
- Qoxra tad-drapp
- Manwal ta' Installazzjoni
- Viti
- Wrench
Setup u Assemblea
The MAF King Size Box Spring features a foldable design for easier setup. It is recommended that two adults assemble this product.
Għodod Meħtieġa:
- Included Wrench
- (Optional) Power screwdriver for faster assembly
Passi tal-Assemblea:
- Ħoll il-Komponenti: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Ensure all listed components are present.
- Iftaħ il-Qafas: The box spring frame comes in a folded configuration. Gently unfold the sections as shown in the diagram below. Ensure the triangular support designs lock into place.
- Konnessjonijiet sikuri: Align the frame sections and secure them using the provided screws and wrench. Ensure all connections are tightened securely to prevent wobbling or noise.
- Installa l-Paletti: Place the metal slats into their designated positions on the frame. The U-shaped groove design helps secure each pole and support frame.
- Applika l-Kisi tad-Drapp: Once the frame is fully assembled and stable, carefully place the removable fabric cover over the box spring. The cover is designed for easy application and removal.
Figure 1: Assembly Steps for the MAF Box Spring.
Figure 2: Foldable Design and Easy Assembly Overview.
Figure 3: Key Structural Features: Round Corners, Triangular Support, and U-Shaped Grooves.
Istruzzjonijiet Operattivi
The MAF Box Spring is designed to provide stable support for your mattress. It can be used with various mattress types, including innerspring, memory foam, and latex mattresses.
- Pjazzament: Position the assembled box spring on a compatible bed frame or directly on the floor if desired. Ensure it is level and stable.
- Tqegħid tas-Saqqijiet: Carefully place your mattress on top of the box spring. The box spring is designed to support mattresses up to 80"L x 76"W.
- Kapaċità tal-piż: The box spring is engineered to support up to 3500 lbs. Do not exceed this weight limit to maintain structural integrity and safety.
- Tnaqqis tal-Ħsejjes: The U-shaped groove design and seamless welding are intended to prevent structural distortion and squeaks, providing a quiet sleeping environment.
Figure 4: Proper Layering of Bed Components.
Manutenzjoni u Kura
Proper maintenance ensures the longevity and performance of your MAF Box Spring.
- Tindif tal-Qoxra: The fabric cover is removable and washable. Remove it from the frame for cleaning as needed. Follow care instructions on the cover label if available, or wash with mild detergent and cold water, then air dry.
- Tindif tal-qafas: Imsaħ il-qafas tal-metall b'ċarruta niexfa biex tneħħi t-trab u l-fdalijiet. Evita li tuża kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Spezzjoni regolari: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Inspect the frame for any signs of bending, cracks, or damage.
- Moving the Box Spring: If you need to move the box spring, it is recommended to disassemble it first, especially if moving through narrow doorways or stairs, to prevent damage to the product or injury.
Issolvi l-problemi
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ħoss ta' tgħajjir | Konnessjonijiet laxki jew tqegħid irregolari. | Ensure all screws are tightly secured. Verify the box spring is placed on a flat, level surface. The U-shaped groove design is intended to minimize noise; if squeaking persists, re-check assembly. |
| Instabbiltà/Tħawwid | Incomplete assembly or damaged components. | Re-check all assembly steps, ensuring triangular supports are engaged and all fasteners are tight. Inspect for any bent or damaged parts. |
| Saqqijiet li Jiċċaqalqu | Exceeded weight capacity or improper mattress support. | Ensure the combined weight of users and mattress does not exceed 3500 lbs. Verify the mattress is compatible with a box spring. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | MAF |
| Numru tal-Mudell | MAF-MT33-10K |
| Daqs | Re |
| Dimensjonijiet tal-Prodott | 78.8"T x 75.5"W x 10"Għ |
| Daqs tas-Saqqu Kompatibbli | 80"T x 76"W |
| Karatteristika Speċjali | Foldable Design, Round Corner Design, Triangular Support, U-Shaped Groove Design |
| Tip Finish | Trab Miksija |
| Komponenti Inklużi | Box Spring Frame, Fabric Cover, Installation Manual, Screws, Wrench |
| Istruzzjonijiet għall-Kura tal-Prodott | Wipe with Dry Cloth, Removable and Washable Fabric Cover |
| Assemblea Meħtieġa | Iva |
| Distanza mill-Art għall-Oġġett | 10 Pulzier |
| Piż tal-oġġett | 49.1 liri |
| Kapaċità massima tal-piż | 3500 lbs |
Figure 5: MAF Box Spring Size Chart.
Garanzija u Appoġġ
Specific warranty details for the MAF Box Spring are not provided within this manual. For warranty information, please refer to the product packaging or contact MAF customer support directly.
For further assistance, questions, or to report any issues, please visit the official MAF store or contact their customer service department.
