Manwal tal-Utent tal-PRUVEEO D90-4CH Dash Cam u l-Kit tal-Ħardwire

1. Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of your PRUVEEO D90-4CH Dash Cam and ACC Hardwire Kit. This bundle is designed to provide continuous surveillance for your vehicle, especially with its 24-hour parking monitor mode.

Immaġni 1.1: Fuqview of the PRUVEEO D90-4CH Dash Cam and Hardwire Kit.

2. Karatteristiċi ewlenin

• Modalità ta' Parkeġġ ta' 24 Siegħa: The included hardwire kit enables the dash cam's parking monitor to function continuously, even when the vehicle's engine is off. This provides uninterrupted power for extended surveillance.
• Vol baxxtage Protezzjoni: An intelligent system is integrated into the hardwire kit to prevent vehicle battery drain. It automatically cuts off power to the dash cam if the car battery voltage drops below 11.8V (for 12V systems) or 23.5V (for 24V systems), ensuring sufficient power remains to start your vehicle.
• Kompatibilità Wiesgħa: The hardwire kit supports input voltages from 12V to 30V and provides a 5V/3A output, making it compatible with various vehicles and Mini USB interface devices.
• Quad Camera System: The D90-4CH features multiple cameras (Front, Left, Right, Rear) for comprehensive coverage around your vehicle.
• Super Night Vision: Equipped with advanced night vision capabilities, including an F1.8 aperture and infrared lights for the cabin camera, ensuring clear recordings in low-light conditions.
• Serratura ta' Emerġenza: Automatically locks current video footage upon detecting a sudden impact or collision, preventing it from being overwritten.
• Reġistrazzjoni Loop: Continuously records by overwriting the oldest footage when the memory card is full, ensuring uninterrupted recording.

Image 2.1: Illustration of the D90-4CH's quad camera system and key features.

Image 2.2: Demonstration of Super Night Vision capabilities in various lighting conditions.

3. X'hemm fil-Kaxxa

Malli tiftaħ il-kaxxa, jekk jogħġbok ivverifika li l-komponenti kollha li ġejjin huma inklużi:

• PRUVEEO D90-4CH Dash Cam
• Mini USB to Hardwire Kit
• Installation Crowbar
• 8 x Fuse Tap Cables (various types)
• 4 x Cable Hiding Clips
• Karta Micro SD ta' 128GB (installata minn qabel jew inkluża separatament)

Image 3.1: Components of the ACC Hardwire Kit.

4. Setup u Installazzjoni

4.1 Dash Cam Mounting

Mount the D90-4CH Dash Cam securely on your vehicle's dashboard or windshield, ensuring it does not obstruct your view. Use the provided adhesive mount or suction cup mount as appropriate. Position the front camera to capture the road ahead clearly, and adjust the cabin camera for optimal interior view.

4.2 Hardwire Kit Installation for 24-Hour Parking Mode

The hardwire kit connects your dash cam directly to your vehicle's fuse box, providing continuous power for parking mode and protecting against battery drain.

1. Identifika l-Kaxxa tal-Fjusijiet: Locate your vehicle's fuse box. Refer to your vehicle's owner's manual for its exact location (typically under the dashboard, in the engine bay, or in the trunk).
2. Qabbad Wajers: The hardwire kit has three wires:
   • Red Wire (ACC): Connect to a fuse that is only powered when the ignition is on (e.g., radio, cigarette lighter). Use one of the provided fuse tap cables.
   • Yellow Wire (12V Normal Power): Connect to a fuse that has constant power, even when the ignition is off (e.g., hazard lights, interior lights). Use a fuse tap cable.
   • Black Wire (Ground): Connect to a metal bolt or screw on the vehicle's chassis that provides a good ground connection.
3. Insert Fuse Taps: Select the appropriate fuse tap cable for your vehicle's fuse type. Insert the original fuse into the lower slot of the fuse tap, and a new fuse (of the same rating as the original) into the upper slot for the dash cam circuit.
4. Kejbils tar-Rotot: Carefully route the hardwire kit cables along the vehicle's trim and headliner using the provided cable hiding clips and installation crowbar to ensure a neat and secure installation.
5. Qabbad ma' Dash Cam: Plug the Mini USB connector from the hardwire kit into the corresponding port on your D90-4CH Dash Cam.
6. Konnessjoni tat-Test: Start your vehicle to ensure the dash cam powers on. Turn off the vehicle and remove the key to verify that the parking mode activates (the dash cam should remain powered or enter a low-power parking mode).

Image 4.1: Wiring diagram for the ACC Hardwire Kit connection to the vehicle's fuse box.

Image 4.2: The LED indicator on the hardwire kit illuminates when correctly installed (ACC and Black wires).

5. Istruzzjonijiet Operattivi

5.1 Operazzjoni Bażika

Once powered, the D90-4CH Dash Cam will automatically begin recording. The display will show the live view from the cameras. You can switch between camera views (front, cabin, rear, split-screen) using the buttons on the device.

5.2 Parking Monitor Mode

With the hardwire kit correctly installed, the dash cam will automatically switch to parking monitor mode when the vehicle's ignition is turned off. In this mode, the dash cam will detect impacts or motion (if enabled) and record short video clips to capture events while parked.

5.3 Accessing Recordings

Recordings are saved to the Micro SD card. You can view recordings directly on the dash cam's screen, or remove the SD card and insert it into a computer for playback and backup. Emergency locked videos are stored in a separate folder to prevent overwriting.

Immaġni 5.1: Eż.amples of video capture from the D90-4CH's multiple cameras.

6. Manutenzjoni

• Lentijiet Naddaf: Regularly clean the camera lenses with a soft, lint-free cloth to ensure clear video quality. Avoid abrasive materials.
• Ġestjoni tal-Karta SD: Periodically format the Micro SD card (at least once a month) to maintain optimal performance and prevent data corruption. Back up important footage qabel il-formattjar.
• Aġġornamenti tal-Firmware: Check the PRUVEEO official webżur is-sit għal kwalunkwe aġġornament tal-firmware disponibbli biex tiżgura li d-dash cam tiegħek għandha l-aħħar karatteristiċi u tiswija ta' żbalji.
• Temperatura: Avoid exposing the dash cam to extreme temperatures for prolonged periods.

7 Issolvi l-problemi

• Il-Dash Cam Mhux Tixgħel:
  • Check all cable connections, especially the hardwire kit connections to the fuse box and ground.
  • Verify that the vehicle's fuses are intact and not blown.
  • Ensure the vehicle battery has sufficient charge.
• Parking Mode Not Working:
  • Confirm the yellow wire of the hardwire kit is connected to a constant power fuse.
  • Iċċekkja l-volum baxxtage protection setting; if the battery voltage is too low, the kit will cut power.
• Kwalità Fqira tal-Vidjo:
  • Naddaf il-lentijiet tal-kamera.
  • Kun żgur li l-film protettiv tneħħa mil-lentijiet.
  • Check dash cam settings for resolution and exposure.
• SD Card Error/Recording Issues:
  • Format the Micro SD card within the dash cam's settings.
  • Ensure you are using a high-speed (Class 10 or U3) Micro SD card.
  • Try a different Micro SD card to rule out card malfunction.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information, technical support, or service inquiries, please contact PRUVEEO customer support directly. Refer to the product packaging or the official PRUVEEO webis-sit għad-dettalji ta' kuntatt u l-politika tal-garanzija l-aktar aġġornati.

You can also visit the official PRUVEEO Store on Amazon for more information: PRUVEEO Store