usogood Trail Camera WiFi 4K 48MP

1. Introduzzjoni

The usogood TC80 Trail Camera is a high-performance device designed for wildlife monitoring, hunting, and outdoor security. It features 4K video recording, 48MP still image capture, Wi-Fi connectivity for remote control via a dedicated app, and robust waterproof construction. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your trail camera to ensure optimal performance.

Figure 1.1: usogood TC80 Trail Camera and accessories.

2. X'hemm fil-Kaxxa

Upon unboxing your usogood TC80 Trail Camera, please verify that all the following components are included:

• Trail Camera (1 unit)
• Mounting Belt / USB Cable (1 set)
• Instruction Manual (1 copy)
• AA Batteries (8 units)
• 32GB Memory Card (1 unit)

Figure 2.1: Included components of the usogood TC80 Trail Camera kit.

3. Prodott Aktarview

3.1 Karatteristiċi ewlenin

• Wi-Fi & App Control: Remotely control the camera and download media via the "TrailCam GO" app (20m Wi-Fi hotspot range).
• Riżoluzzjoni Għolja: Captures 48MP photos and 4K videos.
• Super Night Vision: Equipped with 36pcs 850nm IR LEDs for clear black-and-white footage up to 20 meters without disturbing wildlife.
• Veloċità tat-Trigger Mgħaġġla: 0.3-second trigger speed with 120° detection angle (3 PIR sensors) to minimize missed shots.
• Durabbli u Ma jgħaddix ilma minnu: IP66 rated for operation in various weather conditions (-20°C to 60°C).
• Modi multipli: Supports photo, video, and hybrid modes, along with time-lapse and continuous shooting.
• Ħażna: Supports up to 128GB Micro SD card (32GB included).
• Qawwa: Operates on 8x AA batteries (included) or external power.
• Skrin LCD ta' 2.0 pulzieri: For direct viewaġġustament tal-installazzjoni u s-settings.

Figure 3.1: High-resolution photo and video capabilities.

Figure 3.2: The 2.0-inch color LCD screen for on-site viewing.

4. Setup

4.1 Battery and Memory Card Installation

1. Iftaħ il-kamera casing billi tiftaħ il-klipps tal-ġenb.
2. Locate the battery compartment. Insert 8 AA batteries, ensuring correct polarity (+/-).
3. Insert the 32GB Micro SD card into the designated slot until it clicks into place. Ensure the card is inserted correctly to avoid damage.
4. Close the camera casing and secure the latches.

4.2 Immuntar tal-Kamera

The camera can be mounted using the included mounting belt or a wall mount (not included). Choose a location that provides a clear view of the desired monitoring area, free from obstructions.

• L-Użu taċ-Ċinturin tal-Immuntar: Thread the belt through the slots on the back of the camera and secure it around a tree or pole. Adjust the camera angle as needed.
• Using a Wall Mount: Attach the camera to a compatible wall mount (purchased separately) using the threaded insert at the bottom of the camera.

4.3 App Connection (TrailCam GO)

The usogood TC80 Trail Camera connects to your smartphone via a direct Wi-Fi hotspot, not your home network. This allows for remote control and media download.

1. Download the "TrailCam GO" app from your device's app store.
2. On your smartphone, ensure Bluetooth and Wi-Fi are enabled, and location permissions are granted for the app.
3. Slide the camera to the ON mode. After a 5-second countdown, the screen will turn black, indicating it has entered working mode.
4. Open the "TrailCam GO" app and tap "Connect Camera." The app will search for available cameras.
5. Select your camera from the list (e.g., "TrailCam_000X").
6. Ladarba konness, inti tista 'preview the camera's view, adjust settings, and download photos/videos directly to your phone.

Note: The effective Wi-Fi distance is approximately 20 meters (65 feet). Due to the 2.4GHz Wi-Fi frequency, potential interference may occur.

Figure 4.1: Steps for connecting the camera to the mobile app.

Figure 4.2: App interface for previewing u aġġustament tas-settings.

5. Istruzzjonijiet Operattivi

5.1 Modi Operattivi

The camera offers three primary operating modes:

• Modalità tar-Ritratti: Jaqbad stampi fissi meta jinstab moviment.
• Modalità Video: Jirrekordja klipps tal-vidjow meta jinstab moviment.
• Modalità Ibrida: Captures both a still image and a video clip when motion is detected.

You can select the desired mode through the camera's internal menu or via the "TrailCam GO" app settings.

5.2 Sejbien tal-Mozzjoni u Veloċità tat-Trigger

The camera utilizes three Passive Infrared (PIR) sensors to detect motion within a 120° field of view. The central PIR sensor covers 60°, while two side PIR sensors cover 30° each. The camera boasts a rapid 0.3-second trigger speed to capture fast-moving subjects.

Tip: Turning off the side PIR sensors can reduce the recording range and conserve battery power, useful in specific monitoring scenarios.

Figure 5.1: 120° PIR Detection Angle.

Figure 5.2: Illustration of 0.2s Trigger Speed.

5.3 Viżjoni bil-lejl

For nighttime recording, the camera employs 36pcs 850nm infrared LEDs, providing clear black-and-white footage up to 20 meters (65 feet) without emitting visible light that could spook wildlife.

Figure 5.3: 20M Night Vision Distance.

5.4 Loop Recording

The camera supports loop recording, which automatically overwrites the oldest footage when the memory card is full. This ensures continuous recording without manual intervention, provided there is sufficient power.

Figure 5.4: Loop Recording Functionality.

5.5 Irkupru tad-Dejta

You can retrieve captured photos and videos using one of the following methods:

• Permezz tal-App: Connect to the camera using the "TrailCam GO" app and download files directly to your smartphone.
• Via USB Cable: Connect the camera to a computer using the provided USB cable. The camera will appear as a removable disk, allowing you to copy files.
• Via Memory Card: Remove the Micro SD card from the camera and insert it into a compatible card reader connected to a computer.

Figure 5.5: Data retrieval options.

5.6 Karatteristiċi tas-Sigurtà

The camera includes features to enhance security and protection:

• Protezzjoni bil-Password: Set a password to prevent unauthorized access to camera settings and captured media.
• Keyhole Design: Allows for the use of an external lock (not included) to secure the camera and prevent theft.
• Smart Battery Compartment Lock: Designed to prevent accidental battery damage from drops.

Figure 5.6: Additional security and convenience features.

6. Manutenzjoni

• Tindif: Uża drapp artab u niexef biex tnaddaf il-lenti u l-housing tal-kamera. Evita prodotti tat-tindif jew solventi li joborxu.
• Sostituzzjoni tal-batterija: Replace all 8 AA batteries when the low battery indicator appears or when performance degrades. Do not mix old and new batteries or different battery types.
• Ġestjoni tal-Kard tal-Memorja: Regularly back up important data from the memory card and format it periodically to maintain optimal performance.
• Protezzjoni tat-Temp: While the camera is IP66 waterproof, ensure the battery compartment and ports are securely closed to prevent water ingress, especially during heavy rain or snow.

Figure 6.1: IP66 Waterproof design for all-weather use.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

usogood is committed to providing high-quality products and excellent customer service. Your purchase of the usogood TC80 Trail Camera includes a warranty and return commitment.

For any inquiries, technical assistance, or support needs, please contact usogood customer service. We offer great lifetime after-sales online support, typically responding within 48 hours.

For more information or to contact support, please visit the official usogood store on Amazon: usogood Store